APE1117H-12 [A-POWER]

IC VREG FIXED POSITIVE REGULATOR, Fixed Positive Single Output Standard Regulator;
APE1117H-12
型号: APE1117H-12
厂家: ADVANCED POWER ELECTRONICS CORP.    ADVANCED POWER ELECTRONICS CORP.
描述:

IC VREG FIXED POSITIVE REGULATOR, Fixed Positive Single Output Standard Regulator

输出元件 调节器
文件: 总5页 (文件大小:48K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Advanced Power  
Electronics Corp.  
APE1117  
1.2V/1A LOW DROPOUT LINEAR REGULATOR  
FEATURES  
DESCRIPTION  
APE1117 is a low dropout positive 1.2V output  
regulator with minimum of 1A output current capability. The  
product is specifically designed to provide well-regulated  
supply for low voltage IC applications. APE1117 is also well  
suited for other applications such as VGA cards. APE1117  
is guaranteed to have lower than 1.4V dropout at full load  
current making it ideal to provide well-regulated outputs of  
1.2V with 2.6V to 12V input supply.  
1.4V Maximum Dropout at Full Load Current  
Fast Transient Response  
Output Current Limiting  
Built-in Thermal Shutdown  
Good Noise Rejection  
3-Terminal Fixed 1.2V + 2% Output Voltage  
Packages : SOT-223, TO-252, SOT-89.  
TYPICAL APPLICATION  
VIN+3.3V  
Vout=1.2V  
VIN  
VOUT  
GND  
C1  
10uF  
C2  
10uF  
APE1117-12  
ORDERING/PACKAGE INFORMATION  
(Top View)  
Tab is VOUT  
APE1117X - XX  
(Top View)  
(Top View)  
Tab is VOUT  
Tab is VOUT  
Package Type  
Output Voltage  
12 : 1.2V  
TO-252  
2
SOT-223  
SOT-89 (G)  
K : SOT-223  
G : SOT-89  
H : TO-252  
1
2
3
1
2
3
3
1
GND VOUT VIN  
VOUT  
GND  
VOUT VIN  
GND  
VIN  
Data and specifications subject to change without notice  
1
201205227  
Advanced Power  
Electronics Corp.  
APE1117  
ABSOLUTE MAXIMUM RATINGS (at TA=25°C)  
DC Supply Voltage(VIN) ---------------------------------- -0.3V to 12V  
Power Dissipation(PD)Note @TA=25oC, TJ=125oC  
SOT-223 ------ 1330mW  
SOT-89 -------- 330mW  
TO-252 -------- 1810mW  
Storage Temperature Range(TST) --------------------- -65°C To 150°C  
Operating Junction Temperature Range(TJ) -------- -40°C To 125°C  
Maximum Junction Temperature(TMJ) ---------------- 150°C  
Thermal Resistance from Junction to Case(Rthjc  
)
SOT-223 ------ 15°C/W  
SOT-89 -------- 100°C/W  
TO-252 -------- 10°C/W  
Note  
Thermal Resistance from Junction to Ambient(Rthja  
)
SOT-223 ------ 75°C/W  
SOT-89 -------- 300°C/W  
TO-252 -------- 55°C/W  
Note. Tap is connected to the multi-layer PCB cupper area 10mm*10mm.  
ELECTRICAL SPECIFICATIONS  
(TA=25°C, unless otherwise specified)  
UNITS  
Parameter  
TEST CONDITION  
MIN  
TYP MAX  
Operation Input Voltage  
2.6  
-
12  
V
APE1117X-  
12  
Dropout Voltage(VIN-VOUT  
)
I
OUT = 1A , δVOUT=1%VOUT  
-
1.3  
1.4  
V
(V -VOUT) = 3V  
APE1117X-12  
Current Limit  
1
-
-
-
A
IN  
Minimum Load Current  
APE1117X-12 0°CTJ125°C  
5
10  
mA  
IOUT = 10mA, 2.6VVIN7V,  
TJ=25°C (Note 1,2)  
-
-
1.2  
3.6  
APE1117X-12  
Line Regulation  
%
I
OUT = 10mA, 2.6VVIN12V,  
1.8  
6
TJ=25°C (Note 1,2)  
VIN=2.6V, 10mAIOUT1A, TJ=25°  
C (Note 1,2)  
IOUT = 10mA, TJ = 25°C, 2.6VVIN  
7V  
APE1117X-12  
APE1117X-12  
Load Regulation  
Output Voltage  
-
-
12  
mV  
V
1.175  
1.2 1.225  
F=120Hz,COUT=25uF  
Tantalum,  
Ripple Rejection  
-
-
60  
70  
-
dB  
%
I
I
OUT=1A,VIN=5V  
OUT=10mA  
Temperature Stability  
0.5  
Note1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a  
constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package.  
Note2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference  
between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output  
range.  
Note3: Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the device is  
guaranteed to regulate if the output current is greater than 10mA.  
2
Advanced Power  
Electronics Corp.  
APE1117  
PIN DESCRIPTIONS  
PIN SYMBOL  
GND  
PIN DESCRIPTION  
A resistor divider from this pin to the VOUT pin and ground sets the output voltage.  
(Ground only for Fixed-Mode)  
The output of the regulator. A minimum of 10uF capacitor (0.1Ω < ESR < 20Ω)  
must be connected from this pin to ground to insure stability.  
VOUT  
The input pin of regulator. Typically a large storage capacitor (0.10Ω < ESR < 20  
Ω) is connected from this pin to ground to insure that the input voltage does not  
sag below the minimum dropout voltage during the load transient response. This  
pin must always be 1.4V higher than VOUT in order for the device to regulate  
properly.  
VIN  
BLOCK DIAGRAM  
3
2
Vin  
Vout  
+
+
-
+
1.2V  
CURRENT  
LIMIT  
+
Thermal  
Shutdown  
-
1
GND  
3
Advanced Power  
Electronics Corp.  
APE1117  
TYPICAL PERFORMANCE CHARACTERISTICS  
2 .0  
1. 8  
0.20  
0
1. 6  
1. 4  
1. 2  
1. 0  
0. 8  
0. 6  
I load=800mA  
Tj = 25oC  
-0.20  
-0.40  
-0.80  
- 1  
Tj = 125oC  
0. 4  
0. 2  
0
0
250  
Output Current (mA)  
Dropout Voltage vs Output Current  
500  
750  
1000  
25  
Temperature ()  
Load Regulation vs Temperature  
50  
75  
100  
125  
-25  
0
2
1.5  
1
1
0.8  
0. 5  
0
0.6  
0.4  
0.2  
0
-0.5  
- 1  
-1.5  
- 2  
-50 -25  
0
25  
50  
75  
100 125 150  
2
4
6
8
10  
12  
Temperature ()  
Input Voltage (V)  
Percent Change in Output Voltage  
vs Temperature  
Line Regulation  
7.5  
6.5  
30  
20  
Cin=1uF  
Cout=10 uF Tantalum  
C in =1uF  
C out= 10 uF Tantalum  
Preload= 100mA  
10  
0
5.5  
40  
-10  
20  
0
-20  
2
1
0
-20  
-40  
-1  
0
20 40 60 80 100 120 140 160 180 200  
TIME(us)  
0
10 20 30 40 50 60 70 80 90 100  
TIME(us)  
Line Transient Response  
Load Transient Response  
4
Advanced Power  
Electronics Corp.  
APE1117  
MARKING INFORMATION  
SOT-223  
Part Number :  
Output Voltage :  
12 : 1.2V  
117-12  
YWWSSS  
Date Code (YWWSSS)  
Y:Year  
WWWeek  
SSSSequence  
SOT-89  
Identification code :  
Part Number Identification code  
APE1117G-12 Ea  
XX  
Date Code (YWWS)  
YWWS  
Y:Year  
WWWeek  
SSequence  
TO-252  
Part Number :  
Output Voltage :  
12 : 1.2V  
117-12  
Logo  
YWWSSS  
Date Code (YWWSSS)  
YLast Digit Of The Year  
WWWeek  
SSSSequence  
5

相关型号:

APE1117H-15

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117H-15-HF

IC VREG 1.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO2, HALOGEN FREE AND ROHS COMPLIANT, TO-252, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117H-18

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117H-18-HF

IC VREG 1.8 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO2, HALOGEN FREE AND ROHS COMPLIANT, TO-252, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117H-19

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117H-19-HF

IC VREG 1.9 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO2, HALOGEN FREE AND ROHS COMPLIANT, TO-252, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117H-25

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117H-25-HF

IC VREG 2.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO2, HALOGEN FREE AND ROHS COMPLIANT, TO-252, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117H-33

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117H-33-HF

IC VREG 3.3 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO2, HALOGEN FREE AND ROHS COMPLIANT, TO-252, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER

APE1117H-50

IC VREG ADJUSTABLE POSITIVE LDO REGULATOR, Adjustable Positive Single Output LDO Regulator
A-POWER

APE1117H-50-HF

IC VREG 5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO2, HALOGEN FREE AND ROHS COMPLIANT, TO-252, 3 PIN, Fixed Positive Single Output LDO Regulator
A-POWER