TP1564AL1-SR [3PEAK]
6MHz, 600μA, RRIO, Op Amps;型号: | TP1564AL1-SR |
厂家: | 3PEAK |
描述: | 6MHz, 600μA, RRIO, Op Amps |
文件: | 总17页 (文件大小:1565K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Features
Description
Supply Voltage: 2.5V to 6.0V
The TP156XAL1 series are CMOS dual, and quad RRIO op-
amps with low offset, low power and stable high frequency
response. They incorporate 3PEAK’s proprietary and patented
design techniques to achieve very good AC performance with
6MHz bandwidth, 4.5V/μs slew rate and low distortion while
drawing only 600μA of quiescent current per amplifier. The input
common-mode voltage range extends 300mV beyond V– and
V+, and the outputs swing rail-to-rail. The TP156XAL1 family
can be used as plug-in replacements for many commercially
available op-amps to reduce power and improve input/output
range and performance.
Low Supply Current: typical 600μA per channel
Rail to Rail Input and Output
Bandwidth: typical 6 MHz
Slew Rate: typical 4.5V/μs
Excellent EMI Suppress Performance
Offset Voltage: maximum ±3mV
Offset Voltage Temperature Drift: typical 1 μV/°C
Low Noise: typical 19 nV/√Hz at 1kHz
High Output Capability: typical 100mA
–40°C to 125°C Operation Temperature Range
Green, Popular Type Package
The combination of features makes the TP156XAL1 ideal
choices for motor control and portable audio amplification,
sound ports, and other consumer Audio. The TP156XAL1 Op-
amp is very stable, and it is capable of driving heavy capacitive
loads such as those found in LCDs. The ability to swing rail-to-
rail at the inputs and outputs enables designers to buffer CMOS
DACs, ASICs, or other wide output swing devices in single-
supply systems.
Applications
White Goods
Motor Control
Pin Configuration
TP1561AL1
5-Pin SOT23/SC70
TP1562AL1
8-Pin SOIC/TSSOP/MSOP
TP1564AL1
14-Pin SOIC/TSSOP
-T and -C Suffixes
-S, -T and -V Suffixes
-S and -T Suffixes
1
2
3
4
5
6
7
14
13 ﹣In D
Out A
﹣In A
﹢In A
﹢Vs
Out D
1
2
3
5
4
1
2
3
4
8
Out
Out A
﹢Vs
﹢Vs
﹣In A
7
6
5
Out B
﹣In B
﹢In B
﹣Vs
A
A
B
D
C
12
11
﹢In D
﹣Vs
+In
-In
﹢In A
﹣Vs
B
10 ﹢In C
﹢In B
﹣In B
Out B
9
8
﹣In C
TP1561AUL1
TP1562AL1
8-Pin DFN 2*2
(-F Suffix)
5-Pin SC70
Out C
-C Suffixes
8
7
6
5
1
2
3
4
1
2
3
5
4
﹢Vs
+In
-VS
-In
+VS
Out
Out A
﹣In A
﹢In A
﹣Vs
Out B
﹣In B
﹢In B
The thermal pad of DFN package is recommended
to be left float or connected to -Vs
www.3peakic.com.cn
Rev.A.01
1 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Table of Contents
Features ...........................................................................................................................................................................1
Applications.....................................................................................................................................................................1
Description.......................................................................................................................................................................1
Pin Configuration............................................................................................................................................................1
Table of Contents ............................................................................................................................................................2
Revision History..............................................................................................................................................................3
Order Information............................................................................................................................................................3
Absolute Maximum Ratings Note 1...................................................................................................................................4
ESD Rating.......................................................................................................................................................................4
Thermal Information .......................................................................................................................................................4
Electrical Characteristics ...............................................................................................................................................5
Typical Performance Characteristics............................................................................................................................7
Application Information................................................................................................................................................10
Low Supply Voltage and Low Power Consumption .................................................................................................................... 10
Ground Sensing and Rail to Rail Output .................................................................................................................................... 10
Driving Large Capacitive Load ................................................................................................................................................... 10
Tape and Reel Information ........................................................................................................................................... 11
Package Outline Dimensions.......................................................................................................................................12
SC70-5....................................................................................................................................................................................... 12
SOT23-5..................................................................................................................................................................................... 13
SOIC-8 ....................................................................................................................................................................................... 13
TSSOP-8.................................................................................................................................................................................... 14
MSOP-8 ..................................................................................................................................................................................... 14
DFN-8 2*2 .................................................................................................................................................................................. 15
SOIC-14 ..................................................................................................................................................................................... 16
TSSOP-14.................................................................................................................................................................................. 16
www.3peakic.com.cn
Rev.A.01
2 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Revision History
Date
Revision
Notes
2017/3/1
2017/7/5
2017/10/28
Rev.Pre
Rev.0
Pre-Release Version
Release Version, confirm spec limit
Rev.0.01
TP1564AL1-TR sample is ready. TP1562AL1-VR(MSL1) sample is ready.
Correct the max of Common-mode Input Voltage Range in Electrical Characteristics from (V+) -
0.1 to (V+) + 0.1.
Correct Operating Temperature Range in Maximum Ratings from –45 to 125°C to –40 to 125°C .
Correct mark information of TP1562AL1-VR: XXXX change to XXXXL
Update ESD condition to JS001/002
2017/12/26
2018/5/30
2018/8/30
2019/2/25
Rev.0.02
Rev.0.03
Rev.A
Update full temperature spec, update Vos spec at 5V Vcm
Add New Part: TP1561AUL1-CR, TP1562AL1-FR
Add Spec: Ib: min and max at 25°C and 125°C ; open loop SR: min at 25°C , 85°C and 125°C
Update Package Outline Dimensions to newest factory data.
Rev.A01
Order Information
Operating Temperature
Range
Transport Media,
Quantity
Order Number
Package
Marking Information
MSL
TP1561AL1-TR
-40 to 125°C
-40 to 125°C
-40 to 125°C
5-Pin SOT23
5-Pin SC70
5-Pin SC70
61LXX Note 2
61LXX Note 2
61UXX Note 2
1
1
1
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
TP1561AL1-CR Note 1
TP1561AUL1-CR
1562A
TP1562AL1-SR
TP1562AL1-TSR
TP1562AL1-VR
TP1562AL1-FR
TP1564AL1-SR
TP1564AL1-TR
-40 to 125°C
-40 to 125°C
-40 to 125°C
-40 to 125°C
-40 to 125°C
-40 to 125°C
8-Pin SOIC
1
1
1
1
1
1
Tape and Reel, 4000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 2500
Tape and Reel, 3000
XXXXL Note 3
1562A
8-Pin TSSOP
8-Pin MSOP
8-Pin DFN 2*2
14-Pin SOIC
14-Pin TSSOP
XXXXL Note 3
1562A
XXXXL Note 3
562 Note 1
XXXXL Note 1
1564A
XXXXL Note 3
1564A
XXXXL Note 3
Note 1: The sample will be ready in 1 month.
Note 2: XX is the date code.
Note 3: XXXX is date code, L is the symbol of L1 product.
www.3peakic.com.cn
Rev.A.01
3 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Absolute Maximum Ratings Note 1
Parameters
Rating
Supply Voltage, (+VS)– (-VS)
Input Voltage
7 V
(-VS) – 0.3 to (+VS) + 0.3
±7V
Differential Input Voltage
Input Current: +IN, –IN Note 2
Output Short-Circuit Duration Note 3
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering, 10 sec)
±10mA
Infinite
150°C
–40 to 125°C
–65 to 150°C
260°C
Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to
any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.
Note 2: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 300mV beyond the
power supply, the input current should be limited to less than 10mA.
Note 3: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power
supply voltage and how many amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the
package. The specified values are for short traces connected to the leads.
ESD Rating
Symbol
HBM
Parameter
Condition
Minimum Level
Unit
kV
Human Body Model ESD
Charged Device Model ESD
ANSI/ESDA/JEDEC JS-001
ANSI/ESDA/JEDEC JS-002
8
2
CDM
kV
Thermal Information
Package Type
θJA
θJC
Unit
5-Pin SC70
400
250
158
191
210
100
120
180
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
5-Pin SOT23
8-Pin SOIC
81
43
44
45
60
36
35
8-Pin TSSOP
8-Pin MSOP
8-Pin DFN 2*2
14-Pin SOIC
14-Pin TSSOP
www.3peakic.com.cn
Rev.A.01
4 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Electrical Characteristics
All test condition is VS = 5V, TA = 25°C, RL = 2kΩ, CL =100pF, unless otherwise noted.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Power Supply
VS
Supply Voltage Range
2.5
6
V
600
90
900
1000
μA
μA
dB
IQ
Quiescent Current per Amplifier
TA = -40 to 125°C
VCM = 0V to 3V
PSRR
Power Supply Rejection Ratio
75
-3
Input Characteristics
VOS
Input Offset Voltage
3
4
mV
mV
μV/°C
pA
VOS
Input Offset Voltage
VCM = 0V to 3V, TA = -40 to 125°C -4
TA = -40 to 125°C
VOS TC
Input Offset Voltage Drift
1
TA = 25 °C
-200
1
200
500
IB
Input Bias Current
Input Offset Current
TA = 125 °C
-500
25
1
pA
IOS
pA
Differential Mode
Common Mode
RLOAD = 10kΩ
8
pF
CIN
Input Capacitance
7
pF
Av
Open-loop Voltage Gain
80
100
dB
Common-mode Input Voltage
Range
VCMR
(V-) - 0.1
70
(V+) + 0.1
V
CMRR
Xtalk
Common Mode Rejection Ratio
Channel Separation
VCM = 0V to 2.5V
100
110
dB
dB
f = 1kHz, RL = 2kΩ
Output Characteristics
RLOAD = 10kΩ
3
15
20
mV
mV
mA
mA
mA
VOH, VOL
Maximum Output Voltage Swing
RLOAD = 10kΩ, TA = -40 to 125°C
90
75
65
100
ISC
Output Short-Circuit Current
TA = -40 to 85°C
TA = -40 to 125°C
AC Specifications
GBW
Gain-Bandwidth Product
6
MHz
AV = 1, VOUT = 1.5V to 3.5V, CLOAD
SR
SR
Slew Rate
4.5
4.5
V/μs
= 60pF, RLOAD = 1kΩ
Slew Rate, Open Loop
V/μs
V/μs
V/μs
μs
Open Loop
3
Open Loop, TA = -40 to 85°C
Open Loop, TA = -40 to 125°C
2.3
2
Settling Time, 0.1%
Settling Time, 0.01%
Phase Margin
0.8
1
AV = 1, 2V Step, CLOAD = 60pF,
tS
RLOAD = 1kΩ
μs
PM
GM
RLOAD = 1kΩ, CLOAD = 60pF
RLOAD = 1kΩ, CLOAD = 60pF
60
15
°
Gain Margin
dB
www.3peakic.com.cn
Rev.A.01
5 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Noise Performance
EN
Input Voltage Noise
f = 0.1Hz to 10Hz
f = 1kHz
8
μVPP
eN
Input Voltage Noise Density
Input Current Noise
19
nV/√Hz
fA/√Hz
%
iN
f = 1kHz
2
THD+N
Total Harmonic Distortion and
Noise
f = 1kHz, AV =1, RL = 2kΩ,
0.003
VOUT = 1Vp-p
www.3peakic.com.cn
Rev.A.01
6 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Typical Performance Characteristics
VS = 5V, VCM = 2.5V, RL = Open, unless otherwise specified.
Figure 1. Unity Gain Bandwidth vs. Temperature
Figure 3. Supply Current vs. Temperature
Figure 2. Open-Loop Gain and Phase
Figure 4. Short Circuit Current vs. Temperature
Figure 5. Quiescent Current vs. Supply Voltage
Figure 6. Offset Voltage vs. Common-Mode Voltage
www.3peakic.com.cn
Rev.A.01
7 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Figure 7. CMRR vs. Frequency
Figure 8. CMRR vs. Temperature
Figure 9. PSRR vs. Frequency
Figure 10. PSRR vs. Temperature
Figure 11. Input Voltage Noise Spectral Density
Figure 12. 0.1 Hz to 10 Hz Input Voltage Noise
www.3peakic.com.cn
Rev.A.01
8 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Gain=+1
RL=10kΩ
Time (500μs/div)
Figure 13. EMIRR IN+ vs. Frequency
Figure 14. Large-Scale Step Response
Figure 15. Negative Over-Voltage Recovery
Figure 16. Positive Over-Voltage Recovery
Figure 17. Negative Output Swing vs. Load Current
Figure 18. Positive Output Swing vs. Load Current
www.3peakic.com.cn
Rev.A.01
9 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Application Information
Low Supply Voltage and Low Power Consumption
The TP156XAL1 family of operational amplifiers can operate with power supply voltages from 2.5 V to 6.0 V. Each amplifier draws
only 600 μA quiescent current. The low supply voltage capability and low supply current are ideal for portable applications demanding
high capacitive load driving capability and stable wide bandwidth. The TP156XAL1 family is optimized for wide bandwidth low power
applications. They have an industry leading high GBWP to power ratio and are unity gain stable for any capacitive load. When the
load capacitance increases, the increased capacitance at the output pushed the non-dominant pole to lower frequency in the open
loop frequency response, lowering the phase and gain margin. Higher gain configurations tend to have better capacitive drive
capability than lower gain configurations due to lower closed loop bandwidth and hence higher phase margin.
Ground Sensing and Rail to Rail Output
The TP156XAL1 family has excellent output drive capability, delivering over 100 mA of output drive current. The output stage is a
rail-to-rail topology that is capable of swinging to within 10mV of either rail. Since the inputs can go 300 mV beyond either rail, the
op-amp can easily perform ‘true ground’ sensing.
The maximum output current is a function of total supply voltage. As the supply voltage to the amplifier increases, the output current
capability also increases. Attention must be paid to keep the junction temperature of the IC below 150°C when the output is in
continuous short-circuit. The output of the amplifier has reverse-biased ESD diodes connected to each supply. The output should not
be forced more than 0.5V beyond either supply, otherwise current will flow through these diodes.
Driving Large Capacitive Load
The TP156XAL1 family of OPA is designed to drive large capacitive loads. Refer to Typical Performance Characteristics for “Phase
Margin vs. Load Capacitance”. As always, larger load capacitance decreases overall phase margin in a feedback system where
internal frequency compensation is utilized. As the load capacitance increases, the feedback loop’s phase margin decreases, and
the closed-loop bandwidth is reduced. This produces gain peaking in the frequency response, with overshoot and ringing in output
step response. The unity-gain buffer (G = +1V/V) is the most sensitive to large capacitive loads.
When driving large capacitive loads with the TP156XAL1 OPA family (e.g., > 200 pF when G = +1V/V), a small series resistor at the
output (RISO in Figure 3) improves the feedback loop’s phase margin and stability by making the output load resistive at higher
frequencies.
Riso
Vout
Vin
Cload
www.3peakic.com.cn
Rev.A.01
10 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Tape and Reel Information
Order Number
Package
D1
W1
A0
B0
K0
P0
W0
Pin1
Quadrant
Q3
TP1561AL1-CR
TP1561AUL1-CR
TP1561AL1-TR
TP1562AL1-SR
TP1562AL1-VR
TP1562AL1-TSR
TP1562AL1-FR
TP1564AL1-SR
TP1564AL1-TR
5-Pin SC70
178.0
178.0
180.0
330.0
330.0
330.0
180.0
330.0
330.0
12.3
12.3
13.1
17.6
17.6
17.6
13.1
21.6
17.6
2.4
2.4
3.2
6.4
5.2
6.8
2.3
6.5
6.8
2.5
2.5
3.2
5.4
3.3
3.3
2.3
9.0
5.4
1.2
1.2
1.4
2.1
1.5
1.2
1.1
2.1
1.2
4.0
4.0
4.0
8.0
8.0
8.0
4.0
8.0
8.0
8.0
5-Pin SC70
8.0
Q3
5-Pin SOT23
8-Pin SOIC
8.0
Q3
12.0
12.0
12.0
8.0
Q1
8-Pin MSOP
8-Pin TSSOP
8-Pin DFN 2*2
14-Pin SOIC
14-Pin TSSOP
Q1
Q1
Q1
16.0
12.0
Q1
Q1
www.3peakic.com.cn
Rev.A.01
11 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
Package Outline Dimensions
SC70-5
www.3peakic.com.cn
Rev.A.01
12 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
SOT23-5
SOIC-8
www.3peakic.com.cn
Rev.A.01
13 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
TSSOP-8
MSOP-8
www.3peakic.com.cn
Rev.A.01
14 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
DFN-8 2*2
www.3peakic.com.cn
Rev.A.01
15 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
SOIC-14
TSSOP-14
www.3peakic.com.cn
Rev.A.01
16 / 17
TP1561AL1/TP1561AUL1/TP1562AL1/TP1564
6MHz, 600μA, RRIO, Op Amps
3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All
other trademarks are the property of their respective owners.
www.3peakic.com.cn
Rev.A.01
17 / 17
相关型号:
©2020 ICPDF网 联系我们和版权申明