N3428-660T02RB [3M]
20 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT, ROHS COMPLIANT;
| 型号： | N3428-660T02RB |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 20 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT, ROHS COMPLIANT 连接器 |
| 文件： | 总5页 (文件大小：746K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight, Compliant Pin
3000 Series
• Military (with 3M’s 3518 and N3518 polarizing key)
and centerbump polarization
• Optional ejector latches
• Optional polarizing posts
• Mounting holes for securing header to board
• Dependable eye-of-the needle pin design
• Optional high-temperature insulator
• See the Regulatory InformationAppendix (RIA) in
the “RoHS compliance” section of
www.3Mconnectors.com for compliance information
Date Modified: April 3, 2013
TS-0478-D
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Gray (PBT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
100 μ” [ 2.54 μm ] Nickel
WipingArea: 30 μ” [ 0.76 μm ] Gold
Solder Tails: 100 μ” [ 2.54 μm ] Tin Lead or 300u” [7.62 um] Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
1 A
Current Rating:
Insulation Resistance:
Withstanding Voltage:
>1 × 109 Ω at 500 VDC
1,000 VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
UL File No.: E68080
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight, Compliant Pin
3000 Series
-620T02
Header
-600T02
Header
with No Ejector/Latch
-630T02
Header
with Long Ejector/Latch
for 3M sockets with Strain Relief
with Short Ejector/Latch
for 3M Sockets without Strain Relief
.08
[2.0]
.08
[2.0]
.573 .010
[14.55]
.424 .010
[10.77]
1.07 Ref
[27.2]
.97 Ref
[24.6]
A
.37 Ref
[9.4]
.46 Ref
[11.7]
D
.28
7.1
.100
REF.
2.54
.020
0.51
.185
4.70
.34
.25
6.4
8.6
.13
3.2
.100
REF.
2.54
2X O .100 [2.54]
SEE NOTE #2
POSITION #1
B
A
Notch B
(See Table)
.025 .002 Sq Typ
[0.64]
Notch C
Notch A
(See Table & Note 1)
(See Table & Note 1)
Position 1
Orientation
Triangle
A
.24
[6.1]
.68
[17.3]
.35
[8.9]
.30
[7.6]
.19
[4.8]
.020
[0.51]
.175 .010
[4.44]
A
.21
[5.3]
.16
[4.1]
Section A-A
Inch
(mm)
C
Tolerance Unless Noted
Notes:
.00
.000
.0
1. Notches A & C will accomodate 3M Polarizing Keys 3518 or N3518.
± .005
± .01
Inch
± .1
2. Accepts Rear and Front entry mounting hardware:
Rear Entry: #4-24 thread cutting screw
[ ] Dimensions for
Reference only
3M Part # 3341-5 (.116 [2.95] dia. mounting hole).
Front Entry (Prior to installation of latch): #2-56 Bolt and Nut
3M Part # 3341-6 (.106 [2.69] dia. mounting hole).
TS-0478-D
Sheet 2 of 4
See illustrations on page 4
C
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight, Compliant Pin
3000 Series
Dimensions
Polarizing
Notches
Provided
3M Part
Pin Qty
Insertion platen
3442-00XX
Number
A
B
C
D
10
14
16
20
24
26
30
34
40
50
60
64
3793
3314
3408
3428
3627
3429
3440
3431
3432
3433
3372
3764
1.26 (32.1)
1.46 (37.2)
1.56 (39.7)
1.76 (44.8)
1.96 (49.9)
2.06 (52.4)
2.26 (57.5)
2.46 (62.6)
2.76 (70.2)
3.26 (82.9)
3.76 (95.6)
3.96 (100.7)
1.105 (28.07)
1.305 (33.15)
1.405 (35.69)
1.605 (40.77)
1.805 (45.85)
1.905 (48.39)
2.105 (53.47)
2.305 (58.55)
2.605 (66.17)
3.105 (78.87)
3.605 (91.57)
3.805 (96.65)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.565 (39.75)
1.665 (42.29)
1.865 (47.37)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.71 (18.0)
0.91 (23.1)
1.01 (25.6)
1.21 (30.7)
1.41 (35.8)
1.51 (38.3)
1.71 (43.4)
1.91 (48.5)
2.21 (56.1)
2.71 (68.8)
3.21 (81.5)
3.41 (86.6)
BC
3442-0048
3442-0049
3442-0050
3442-0051
3442-0052
3442-0053
3442-0054
3442-0055
3442-0056
3442-0057
3442-0058
3442-0059
BC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
.106
.116
[2.95]
R
T
T
S
S
.300 Min
[2.69]
or
[7.62]
(See Note 2)
Side to Side
Stackability
R
Mating
Area
See Note 3
Tail
Section
Compliant Section
4X R .009 Max
[0.23]
.100 .003
[2.54]
4X .002 .001
Section R-R
[0.05]
.060
[1.52]
Position 1
R .020 Sym
[0.51]
.352
[8.94]
Break Edges
.100 .003
[2.54]
B
Section T-T
Recommended Mounting Hole Pattern
Section S-S
Note:
Pin Cross Sections
3. Listed below are the PCB hole sizes and tolerances recommended for use with 3M’s compliant
pin header. The insertion force is designed not to exceed 40 pounds per pin and the withdrawal
force is not less than 10 pounds per pin.
4. Use of snap-in latch/ejectors in either short (N3XXX-650T02XX) or long (N3XXX-660T02XX)
styles, installed or shipped separately. (-5 & -6 snap-in latches are dimensionally and functionally
equivalent to -2 & -3 roll pin latches)
Hole Size for:
Preferred Drilled - ø.0453 ± .0005
Acceptable Drilled - ø.0453 +.0005
-.0010
After Etchback - ø.0460 Max
After Plating - .ø040 ± .003
Board thickness - .093 to .150
Plating:
.001 Minimum Copper plating thickness
.0003 Min Tin plating
If ordering Snap-In style latches separately, please use the chart below
Short Latch
3505-30
Long Latch
3505-31
Color
Gray
Black
High Temp (PPA)
High Temp (PPA)
N3505-30B
N3505-31B
Ordering Information
X XXXX - 6X0T02XX
Prefix:
Blank = Std.Temp Gray (PBT): (TC Plating Req’d)
N = High Temp Black (PCT) (RB Plating Req’d)
Plating suffix:
TC = 30 μ” Gold w/Tin-Lead Tails (App. E2 & C2 Apply)
RB = 30 μ” Gold w/Matte Tin Tails (App. E1 & C1 Apply)
Latch/Ejector System:
0 = No latch/ejectors
2 = Short latch/ejectors
3 = Long latch/ejectors
5 = Short, Snap-In Latch/Ejectors
6 = Long, Snap-In Latch/Ejectors
3M Part Number
Assembly Equipment: Use 3442-00XX platen (see chart above) and
appropriate commercial arbor press to press header into pc board.
TS-0478-D
Sheet 3 of 4
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight, Compliant Pin
3000 Series
Polarizing Post
3201-4
3201-5
LC P
P B T
B lac k
G ray
.318
[8.08]
.100 Dia
[2.54]
Note: Insert Post into one mounting hardware hole on
bottom of header. Set post to protrude .115” [2.92]
Polarizing Keys
Dim A
.02
.02
N3518
3518
LCP
PBT
Black
Gray
.09
[2.3]
Breakaway Tab
.34 Ref
[8.6]
A
.15
[3.8]
Note: #2216 B/A Scotchweld can be used to adhere keys.
Mounting Hardware
3341-6
(Must be inserted prior to latch on
vertical headers)
3341-5
(Installed from bottom of board)
.50
[12.7]
.31
[7.9]
Hex Head Bolt, Nut and Wash
Bolt - #2-56 X 1/2”
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
3341-5 & 6
Material - Stainless Steel
Not for use with Condo headers.
TS-0478-D
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
相关型号：
N3428-L002RB
Board Connector, 40 Contact(s), 4 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
3M
N3428-L202
Board Connector, 40 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Beige Insulator, Receptacle
3M
©2020 ICPDF网 联系我们和版权申明