MU18-250DF [3M]
BRASS, TIN FINISH, PUSH-ON TERMINAL;
| 型号： | MU18-250DF |
| 厂家： | 
3M ELECTRONICS |
| 描述： | BRASS, TIN FINISH, PUSH-ON TERMINAL 端子和端子排 |
| 文件： | 总2页 (文件大小：32K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Scotchlok™ Terminals
MU18-250DF, MU14-250DF
W´
Female Disconnect, Non-Insulated, Butted Seam
L
Data Sheet
Mates with
Wire
Range
(AWG)
Male Tab
Width (W´ )
x Thickness
Product
Number
Barrel
Length
Barrel
I.D.
L
MU18-250DF
MU14-250DF
22-18
16-14
0.250 x 0.032
0.250 x 0.032
0.66
0.66
0.25
0.25
0.080
0.080
Installation Information
ꢀWARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
UNDERWRITERS
CANADIAN STANDARDS
ASSOCIATION
LABORATORIES
STANDARD NO. UL 486C
3M FILE NO. E70512
STANDARD NO. 22.2
NO. 0, 65
3M FILE NO. LR22190
UL Listed and CSA Certified for use on stranded copper
wire only.
Strip away the end 1/4 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or
TR-490 (ratchet style) hand tools.
Specifications
Wire Size:
Barrel Seam:
Maximum Voltage Rating:
See Table Above
Butted
600 V Building Wire
1000 V signs or
fixtures (Luminaires)
Same as Wire
Brass
Barrel Crimp (Electrical)
Maximum Current:
Terminal Material:
Plating:
Tin
Suitable for factory application on steel or brass tabs UL
and CSA.
Suitable for field application on brass tabs, strain relief
required, UL only.
Engineering Specification
The Non-Insulated 0.250˝ Female Disconnect shall be
tin plated 0.020˝ thick brass with a tongue for gripping
a 0.250” Male Tab of 0.032˝ thickness and a butted
seam barrel sized for a specified (AWG) wire range
(22-18, 16-14).
Crimp-Type Female Disconnect Terminals shall,
electrically and mechanically, connect permanently to
a prestripped end of a stranded copper wire: and have
a tongue portion with fingers which grip a Male
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Termination.
Insulated connectors shall be UL Listed and CSA
Certified for 600 V building wire: 1000 V signs or
lighting fixtures (luminaires).
The connector line shall offer tongue variations (sized
to grip Male Tabs: 0.187˝ x 0.250˝)and barrel
variations in construction (non-insulated, nylon
insulated with insulation grip, etc.). The tongue
portion shall be marked with the wire range and
manufacturer’s symbol (ꢀ).
Female Disconnects shall be suitable for field or
factory wiring, with a UL Recognized strain relief
required.
3M and Scotchlok are trademarks of 3M Company.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2003 78-8125-9936-9-B
相关型号：
©2020 ICPDF网 联系我们和版权申明