MP2-H060-52S2-S-KR [3M]
60 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT;型号: | MP2-H060-52S2-S-KR |
厂家: | 3M ELECTRONICS |
描述: | 60 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT |
文件: | 总5页 (文件大小:1074K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ MetPak™ 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
Solder Tail
•ꢀ End-to-endꢀstackable
•ꢀ Selectꢀloadꢀcapability
•ꢀ Monoblockable
•ꢀ ShoulderꢀPin
Press Fit
•ꢀ End-to-endꢀstackable
•ꢀ Earlyꢀmateꢀlateꢀbreakꢀforꢀhotꢀswappingꢀ(press-fitꢀEMLBꢀ
adjustedꢀbyꢀapplicationꢀtooling)
•ꢀ Selectꢀloadꢀcapability
•ꢀ Monoblockable
•ꢀ Push-onꢀshoulderꢀpin
•ꢀ Optionalꢀfeed-throughꢀtailꢀforꢀrearꢀplug-upꢀmidplaneꢀ
applications
•ꢀ AcceptsꢀUniversalꢀTooling
•ꢀ RoHSꢀCompliant.ꢀSeeꢀtheꢀRegulatoryꢀInformationꢀ
Appendixꢀ(RIA)ꢀinꢀtheꢀ“RoHSꢀcompliance”ꢀsectionꢀofꢀꢀ
www.3M.com/Interconnectsꢀforꢀcomplianceꢀinformationꢀ
(RIAꢀE1ꢀ&ꢀC1ꢀapply)
Date Modified: September 9, 2009
TS-1120-C
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Color:
Material:
Phosphor Bronze
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
WipingArea: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating: Signal: 1.5A -All contacts simultaneously
103 MΩ
Insulation Resistance:
Withstanding Voltage: 1,000V
AC
Environmental
Temperature Rating: -55°C to +125°C
Process Temperature Rating: 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
ULꢀFileꢀNo.:ꢀE68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ MetPak™ 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
POSITION X
2.00
.079
6.00
"A"
.236
POSITION 2
POSITION 1
15.80
.622
11.50
.453
1.40
.055
2.00
.079
FOR SPECIAL MONOBLOCKS
AND PIN ARRANGEMENTS
CONTACT 3M SALES
17.00
.669
REPRESENTATIVE
mm
[inch]
3.50
.138
Tolerance Unless Noted
12.00
0
0.0
0.00
.472
mm
±3
±0.3 ±0.13
4 ROW PRODUCT
[ ] Dimensions for Reference Only
17.80
.701
13.52
.532
MATING LENGTH
"B" TAIL LENGTH
14.00
.551
"C"
A
D C B
E
ROW
SOLDER TAIL
PRODUCT
PRESS-FIT
PRODUCT
PRESS-FIT
PRODUCT
REAR
5 ROW PRODUCT
PLUG-UP
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a
plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2 - HXXX - XXXX - S - XXXXX
Plating Options:
(See Table 4)
H = Header
Pin Count
Shouldered Pins
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Tail Length
(See Table 3)
Loading Pattern
(See Table 2)
Termination Style
P = Press-Fit
TS-1120-C
Sheet 2 of 4
S = Solder Tail
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ MetPak™ 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
Table 1 - Connector & Row Lengths
Table 4 - Plating Options
Pin
Count
Dim. “A”
mm [inch]
Dim “C”
mm [inch]
Rows
Plating Press-Fit Solder
Plating Composition
Suffix
Tails*
Tails
0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
024
048
072
096
120
144
168
192
030
060
090
120
150
180
210
240
11.95 [0.471]
23.95 [0.943]
35.95 [1.415]
47.95 [1.889]
59.95 [2.36]
71.95 [2.833]
83.95 [3.305]
95.95 [3.778]
11.95 [0.471]
23.95 [0.943]
35.95 [1.415]
47.95 [1.888]
59.95 [2.361]
71.95 [2.833]
83.95 [3.305]
95.95 [3.778]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
(RIA E2 &
C2 apply)
(RIA E3 &
C2 apply)
TG
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
(RIA E2 &
C2 apply)
(RIA E3 &
C2 apply)
TG30
TR30
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
(RIA E2 &
C2 apply)
(RIA E3 &
C2 apply)
0.13 μm [5 μ”] Min. Hard Au Contact Area,
Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
(RIA E2 &
C2 apply)
(RIA E3 &
C2 apply)
TR40B
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
FJ
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
KR
1.27 μm [50 μ”] Min. Ni all over
1.27 μm [50 μ”] Min. Au Contact Area, Lubri-
cated
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
RF
LR
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
Table 3 - Tail Length Options
Termination Option No. Dim. “B”
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
Solder Tail
Press-Fit* Tail
1.27 μm [50 μ”] Min. Ni all over
0.13 μm [5 μ”] Min. Hard Au Contact Area,
Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating
Sn Tail Area
1
2
3
1
4.60 [0.181]
3.53 [0.139]
2.72 [0.107]
13.60 [0.535]
17.00 [0.669]
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
PD
5 (Contact 3M)
7 (Contact 3M)
0.76 μm [30 μ”] Min. Au Dual Contact Areas
0.10 μm [4 μ”] Min. Au Needle Eye
1.27 μm [50 μ”] Min. Ni all over
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
KV
*Compliant-Pin Tail
Table 2 - Mate Length vs. Loading Pattern
Mate length
Row E
(5-Row Prod. Only)
Loading Pattern
Code
Mate length
Row A
Mate length
Row B
Mate length
Row C
Mate length
Row D
Description
1
2
3
All Positions Filled
All Positions Filled
All Positions Filled
5.00 [0.197]
6.50 [0.256]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
5.00 [0.197]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
6.50 [0.256]
4
5
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
6.50 [0.256]
5.75 [0.226]
7.25 [0.285]
6.50 [0.256]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
7.25 [0.285]
5.00 [0.197]
8.00 [0.315]
5.00 [0.197]
6.50 [0.256]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
8.00 [0.315]
6.50 [0.256]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
6.50 [0.256]
5.75 [0.226]
6.50 [0.256]
7.25 [0.285]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
8.00 [0.315]
7.25 [0.285]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
5.00 [0.197]
7.25 [0.285]
8.00 [0.315]
6.50 [0.256]
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.75 [0.226]
5.00 [0.197]
5.75 [0.226]
7.25 [0.285]
5.00 [0.197]
7.25 [0.285]
6
7
8
9
A
B
C
D
E
G
H
J
8.00 [0.315]
TS-1120-C
Sheet 3 of 4
K
5.00 [0.197]
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ MetPak™ 2-FB Header
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
12.00
.472
16.00
.630
MIN
1
6
. 0
0
M
I N
. 6 3 0
2.00
.079
2.00
.079
A1
12.00
.472
"C"
"D" PLATED THRU HOLE
12.00
.472
Ø
0.10
2.00
.079
CENTER HOLES OPTIONAL
FOR 3M PRODUCT
6.00
.236
+.10
1.50
.059
-.00
Ø
UNPLATED
0.10
+.004
-.000
" D
"
P
L
A
T
E
D
T
H
R
U
H
O
L E
Ø
0
. 1
0
Ø
RECOMMENDED 4 ROW SOLDER
TAIL PCB HOLE MOUNTING PATTERN
RECOMMENDED 4 ROW PRESS-FIT
Table 5 -- HOLE PLATING For TG, TG30, TR30, TR40B FINISHES ONLY
HOLE
Finished Dia. mm [in]
Cu Thickness mm [in] SnPb Thickness microns [μ”]
0.025 [.001] min. 15 [600] max.
Drilled Hole Dia. mm [in]
“D”
0.65-0.80 [.0256-.0315]
0.81-0.86 [.0319-.0339]
Table 6 -- HOLE PLATING For FJ, KR, RF, LR, and PD FINISHES ONLY
Immersion
Electrolitic Au OSP ENTEK
Finished Dia.
mm [in]
Cu Thickness
mm [in]
Matte Sn
Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
Hole
Thickness
Thickness
microns [μ”]
microns [μ”]
“D”
0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
18.00
MIN
14.00
.551
"D " PL A T E D T HR U HO L E
.709
Ø
0 .10
6.00
.236
2.00
.079
2.00
.079
A1
12.00
.472
"C"
12.00
.472
"D" PLATED THRU HOLE
Ø 0.10
2.00
.079
+.10
1.50
.059
CENTER HOLES OPTIONAL
FOR 3M PRODUCT
18 .0 0
M IN
-.00
Ø
UNPLATED
0.10
+.004
-.000
.70 9
Ø
RECOMMENDED 5 ROW SOLDER
TAIL PCB HOLE MOUNTING PATTERN
RECOMMENDED 5 ROW PRESS-FIT
PCB HOLE MOUNTING PATTERN
TS-1120-C
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
相关型号:
MP2-H060-52S2-S-LR
Board Connector, 60 Contact(s), 5 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
3M
MP2-H060-52S2-S-PD
Board Connector, 60 Contact(s), 5 Row(s), Male, Straight, Solder Terminal, ROHS COMPLIANT
3M
MP2-H060-52S3-S-PD
60 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
3M
MP2-H060-53P1-S-KR
Board Connector, 60 Contact(s), 5 Row(s), Male, Straight, Press Fit Terminal, ROHS COMPLIANT
3M
MP2-H060-53P1-S-LR
Board Connector, 60 Contact(s), 5 Row(s), Male, Straight, Press Fit Terminal, ROHS COMPLIANT
3M
MP2-H060-53P1-S-RF
Board Connector, 60 Contact(s), 5 Row(s), Male, Straight, Press Fit Terminal, ROHS COMPLIANT
3M
MP2-H060-53P5-S-PD
Board Connector, 60 Contact(s), 5 Row(s), Male, Straight, Press Fit Terminal, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明