HSD101PFW2-A [3M]
HannStar Display model HSD101PFW2-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device.; 瀚宇显示模型HSD101PFW2 -A是一个彩色有源矩阵薄膜晶体管（ TFT）液晶显示器（LCD ），使用非晶硅TFT作为开关器件。
| 型号： | HSD101PFW2-A |
| 厂家： | 
3M ELECTRONICS |
| 描述： | HannStar Display model HSD101PFW2-A is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. |
| 文件： | 总26页 (文件大小：302K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
1/26
1.0
HannStar Product Specification
(Formal)
Model: HSD101PFW2
-A**
Note:
(1) Please contact HannStar Display Corp. before designing your product based on
this module specification.
(2) The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by HannStar for any
intellectual property claims or other problems that may result from application based on
the module described herein.
(3) The mark “ ** ” of Model means sub-model code.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
2/26
1.0
Record of Revisions
Rev.
1.0
Date
Sub-Model
A**
Description of change
--
Formal Product Specification was first released.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
3/26
1.0
Contents
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
General description …………………………………
Absolute maximum ratings…………………………….
Optical characteristics.……………………………….
Block diagram ………………………………………
Interface pin connection ……………………………
Electrical characteristics ……………………………
Reliability test items …………………………………
Outline dimension ……………………………………
Lot mark ……………………………………………...
p.4
p.5
p.6
p.10
p.12
p.13
p.20
p.21
p.23
p.24
p.25
p.28
p29
p.32
P.33
10.0 Package specification ………………………………
11.0 General precaution ……………………………………
For specific customer revision (Quanta Only) ……………..
HSD101PFW2-A01……………………………………………
For specific customer revision (Samsung Only) ……………
For specific customer revision (LGD Only)………………….
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
4/26
1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction
HannStar Display model HSD101PFW2-A is a color active matrix thin film
transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a
switching device. This model is composed of a TFT LCD panel, a driving circuit
and a back light system. This TFT LCD has a 10.1 (16:9) inch diagonally
measured active display area with WSVGA (1024 horizontal by 600 vertical pixel)
resolution.
1.2 Features
■ 10.1 (16:9 diagonal) inch configuration
■ One channel LVDS interface
■ 262K color by 6 bit R.G.B signal input
■ RoHS Compliance
■ Halogen Free
1.3 Applications
ꢀ Mobile NB
ꢀ Digital Photo frame
ꢀ Display terminal for AV application
1.4 General information
Item
Specification
235 x 143 x 4.9 (Typ.)
222.72(H) x 125.28(V)
Unit
Outline Dimension
Display area
Number of Pixel
Pixel pitch
mm
mm
1024 RGB (H) x 600(V)
0.2175(H) x 0.2088(V)
RGB Vertical stripe
Normally white
50
pixels
mm
Pixel arrangement
Display mode
NTSC
%
g
Surface treatment
Weight
Glare, Hard-Coating (3H)
180 (Typ.)
Back-light
White LED
Power Consumption
0.65W (Max.)/Logic
W
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
5/26
1.0
1.5 Mechanical Information
Item
Min.
234.5
142.5
Typ.
235
143
Max.
Unit
mm
mm
mm
g
Horizontal (H)
Vertical (V)
Depth (D)
235.5
143.5
5.2
Module
Size
4.9
Weight
180
190
2.0 ABSOLUTE MAXIMUM RATINGS
2.1 Electrical Absolute Rating
2.1.1 TFT LCD Module
Item
Symbol
VDD
Min.
Max.
4.0
Unit
V
Note
Note
Logic Supply voltage
-0.3
2.1.2 Environment Absolute Rating
Item
Symbol
Topa
Min.
0
Max.
50
Unit
Operating Temperature
Storage Temperature
Tstg
-20
60
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
6/26
1.0
3.0 OPTICAL CHARACTERISTICS
3.1 Optical specification
Item
Symbol Condition Min.
Typ.
500
Max.
Unit
Note
400
Contrast
CR
Tr
(1)(2)(4)
4
8
Response time
msec
cd/m2
(1)(3)
Tf
12
24
White luminance
(5 point)
(1)(4)(5)
YL
160
200
(IL=18mA)
=0
Normal
viewing
angle
0.542
0.592
0.642
Rx
Red
0.305
0.277
0.505
0.104
0.044
0.355
0.327
0.555
0.154
0.094
0.405
0.377
0.605
0.204
0.144
RY
Gx
GY
Bx
Green
Blue
Color
chromaticity
(CIE1931)
BY
0.263
0.279
0.313
0.329
45
0.363
0.379
Wx
Wy
White
Hor.
L
R
U
D
40
40
10
30
45
Viewing angle
CR>10
(1)(4)
15
Ver.
35
=0
(5point)
=0
80
70
Brightness uniformity
Brightness Uniformity
BUNI
BUNI
%
%
(5)
(6)
(13 points)
3.2 Measuring Condition
■ Measuring surrounding dark room
■ Ambient temperature 25±2oC
■ 15min. warm-up time.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
7/26
1.0
3.3 Measuring Equipment
■ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity
and BM-5A for other optical characteristics.
■ Measuring spot size 20 ~ 21 mm
Note (1) Definition of Viewing Angle:
Θ
U
12’ o’clock
Φ=90o
Θ
L
Θ
R
Φ=180o
Φ=0o
Θ
D
6’ o’clock
Φ=270o
Note (2) Definition of Contrast Ratio (CR) :
measured at the center point of panel
Luminance with all pixels white
CR =
Luminance with all pixels black
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
8/26
1.0
Note (3) Definition of Response Time : Sum of TR and TF
white(TFT OFF) black
(TFT ON)
white(TFT OFF)
TR
T
F
100%
90%
Optical
response
10%
0%
time
Note (4) Definition of optical measurement setup
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
9/26
1.0
Note (5) Definition of Average Luminance Uniformity of White (5 Point)
Y1+Y2+Y3+Y4+Y5
Average Luminance Uniformity =
5
Note (6) Definition of brightness uniformity
(Min Luminance of 5 points)
Luminance uniformity(5 points) =
Luminance uniformity(13points) =
100%
(Max Luminance of 5 points)
(Min Luminance of 13 points)
(Max Luminance of 13 points)
100%
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
10/26
1.0
4.0 BLOCK DIAGRAM
4.1 TFT LCD Module:
LED B/L
X-driver IC
LED
Driver
Timing
Controller
+
EDID
Liquid Crystal Panel
1024x600 pixels
LVDS
DC/DC
Receiver
Converter
Gray scale
Manipulation
Voltage
Generation
Circuit
4.2 Pixel Format
1,1024
1,1
1,2
1,3
1,4
2,1
LCD Display Area
1 Pixel
600 Lines
R
R
G
B
R
600,1
600,
1024
1024 pixel (3072 Dots)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
11/26
1.0
4.3 Relationship Between Displayed Color and Input
MSB
LSB
MSB
LSB MSB
LSB Gray scale
Display R5 R4 R3 R2 R1 R0 G 5 G 4 G 3 G2 G 1 G 0 B 5 B 4 B 3 B 2 B1 B 0
level
Black
Blue
Green
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L L
L L
L
L
H
H
L
L
L
H
H
L
L
L
H
H
L
L
L
H
H
L
L L
L H
H L
H H
L L
L H
H L
H H
L L
L L
L L
L
H
L
H
L
H
L
H
L
L
H
L
H
L
H
L
H
L
L
H
L
H
L
H
L
H
L
L
H
L
H
L
H
L
H
L
L
H
L
H
L
H
L
H
L
-
-
-
-
-
-
-
-
L H
L H
H L
H L
H H
H H
L L
Basic
color
Light Blue L
L
L
L
L
Red
H
H
H
H
L
H
H
H
H
L
H
H
H
H
L
H
H
H
H
L
H
H
H
H
L
Purple
Yellow
White
Black
L
L
L
L
H
H
L
L
L
H
H
L
L
L
H
H
L
L
L
H
H
L
L
L
L0
L1
L2
L
L
L
L
L
L
L
L
L
H
H L
L L
L
L
L
L
L
L
L
L
L
L
Dark
↑
↓
Gray
scale
of Red
:
:
:
:
:
:
L3…L60
Light
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
L
H
H
L
L
L
H L
L L
H L
L L
L L
L L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L L
L L
L L
L L
H L
L L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L61
L62
Red L63
L0
Red
Black
L1
L2
Dark
↑
↓
Gray
scale of
Green
:
:
:
:
:
:
L3…L60
Light
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L H
L H
L H
L L
L L
L L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
L
H
H
L
L
L
H L
L L
H L
L L
L L
L L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L
L
L61
L62
Green
Black
L Green L63
L
H
L
L0
L1
L2
Dark
↑
↓
Gray
scale of
Blue
:
:
:
:
:
:
L3…L60
Light
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L L
L L
L L
L L
H L
L L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
L H
L H
L H
L L
H L
L L
H
H
H
L
L
L
H
H
H
L
L
L
H
H
H
L
L
L
L
H
H
L
L
H
H
L
H
L
H
L
L61
L62
Blue L63
L0
Blue
Black
L1
L2
Gray
Dark
↑
↓
scale of
White &
Black
:
:
:
:
:
:
L3…L60
Light
H
H
H
H
H
H
H
H
H
H
H
H
L
H
H
H H
L H
H H
H
H
H
H
H
H
H
H
H
L
H
H
H H
L H
H H
H
H
H
H
H
H
H
H
H
L
H
H
H
L
H
L61
L62
White L63
White
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
12/26
1.0
5.0 INTERFACE PIN CONNECTION
4.1 TFT LCD Module
CN1 (Input signal): IPEX 20455-040E-12 (IPEX or equivalent)
Pin No.
1
Signal
NC
Description
No Connection
2
3
4
5
VCC
VCC
V_EDID
NC
3.3V Power Supply
3.3V Power Supply
EDID 3.3V Power Supply
No Connection
6
7
CLK_EDID EDID Clock
DATA_EDID EDID Data
8
9
RXIN0-
RXIN0+
GND
LVDS Signal - channel0-
LVDS Signal+ channel0+
Ground
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
RXIN1-
RXIN1+
GND
RXIN2-
RXIN2+
GND
Data Input
Data Input
Ground
Data Input
Data Input
Ground
channel1-
channel1+
channel2-
channel2+
RXCLKIN- Data Input
RXCLKIN+ Data Input
CLK-
CLK+
GND
NC
NC
GND
NC
NC
GND
NC
NC
GND
NC
NC
Ground
No Connection
No Connection
Ground
No Connection
No Connection
Ground
No Connection
No Connection
Ground
No Connection
No Connection
VLED_GND LED Ground
VLED_GND LED Ground
VLED_GND LED Ground
NC
PWM
LED_EN
NC
No Connection
PWM Signal for LED dimming control
LED Enable Pin (+3V Input)
No Connection
LED Power Supply 5-21V
LED Power Supply 5-21V
LED Power Supply 5-21V
VLED
VLED
VLED
Note The brightness of LCD panel could be changed by adjusting PWM
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
13/26
1.0
6.0 ELECTRICAL CHARACTERISTICS
6.1 TFT LCD Module
Item
Symbol
Min.
Typ.
Max.
Unit
Note
Note (1)
Supply Voltage
VDD
3.0
3.3
3.6
V
VDD =3.3V L0 pattern
Ta=25 fv=60Hz
Note (2)
Current of
power supply
IDD
-
-
0.192
-
-
A
A
Inrush current
IRUSH
1.50
Note (1): VDD-dip condition:
When VDD operating within 2.7V VDD<3.0V td 10ms , the display may
momentarily become abnormal.
VDD<2.7V , VDD dip condition should also follow the Power On/Off
conditions for supply voltage.
VDD
GND
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
14/26
1.0
Note (2) Power on Inrush current test circuit
VDD
0.9VDD
0.1VDD
0V
0.5 ms
Vin rising time
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
15/26
1.0
6.2 Switching Characteristics for LVDS Receiver
Item
Symbol Min.
Vth
Typ.
1.25
Max.
Unit Conditions
Differential Input High Threshold
Differential Input Low Threshold
100
mV
VCM=1.2V
mV
Vtl
-100
-10
+10
0.6
uA
V
Input Current
IIN
Differential input Voltage
|VID|
0.1
Common Mode Voltage Offset
VCM
(|VID|/2)
2.4-(|VID|/2)
V
6.3 Bit Mapping & Interface Definition
7T
6.5/7T
5.5/7T
4.5/7T
3.5/7T
2.5/7T
1.5/7T
0.5/7T
RCLK
Rin0
Rin1
Rin2
R[2]
G[3]
B[4]
R[1]
G[2]
B[3]
R[0]
G[1]
B[2]
G[0]
B[1]
DE
R[5]
R[4]
G[5]
(HS)
R[3]
R[2]
G[3]
B[4]
R[1]
R[0]
G[1]
B[2]
G[0]
B[0]
G[4]
B[5]
G[2]
B[3]
B[1]
(VS)
DE
Pervious cycle
Current cycle
Next cycle
LVDS Receiver Input Timing Definition
for 6bits LVDS input
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
16/26
1.0
6.4 Interface Timing (DE mode)
Item
Symbol
Min.
55
Typ.
60
Max.
Unit
Hz
Frame Rate
--
t1
t2
t3
t4
t5
t6
t7
65
638
Frame Period
612
600
12
625
600
25
line
Vertical Display Time
Vertical Blanking Time
1 Line Scanning Time
Horizontal Display Time
Horizontal Blanking Time
Clock Rate
600
line
38
line
1160
1024
136
39
1200
1024
176
45
1240
1024
216
clock
clock
clock
MHz
51.42
Timing Diagram of Interface Signal (DE mode)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
17/26
1.0
6.5 Power On / Off Sequence
Power On
Power Supply
Power Off
0.9VDD
0.1VDD
0.9VDD
0.1VDD
0.1VDD
0V
TP1
TP3
TP2
Signal
TP4
0.6V
0.6V
0V
TP6
50%
TP5
Backlight
(Recommended
50%
)
Item
TP1
TP2
TP3
TP4
TP5
TP6
Min.
0.5
0
Typ.
--
--
--
--
Max.
10
50
50
--
Unit
Remark
msec
msec
msec
msec
msec
msec
0
500
200
200
--
--
--
--
Note (1) The supply voltage of the external system for the module input should be the same
as the definition of VDD.
(2) Apply the lamp volatge within the LCD operation range. When the back-light turns
on before the LCD operation or the LCD truns off before the back-light turns off, the
display may momentarily become white.
(3) In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
(4) TP4 should be measured after the module has been fully discharged between
power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
18/26
1.0
6.6 Backlight Unit
Parameter
LED Current
LED Voltage
Symbol
IF
Min
--
Typ
Max
Units
mA
Condition
18.0
18.75
Ta=25
Ta=25
VF
3.0
--
3.2
3.4
Volt
1.38
1.53
LED Power
PLED
Watt
Ta=25
consumption
Note (1)
Ta=25
LED Life-Time
N/A
10,000
--
--
Hour
IF=18mA
Note (2)
Note (1): Calculator value for reference P=IF x VF x N (LED Qty’)
Note (2): The LED lifetime defines as the estimated time to 50% degradation of final
luminous.
6.7 LED Driver
6.7.1 Absolute Maximum Ratings
Item
Symbol
VLED
Min.
-0.3
--
Max.
24
Unit
Volt
Volt
Note
LED Power Supply voltage
LED_EN, PWM pin Voltage VEN, VPWM
5.5
6.7.2 DC Electrical Characteristics
Parameter
Symbol
Min
Typ
Max
Units
Remark
LED Power
Supply Voltage
5.0
--
21.0
Volt
VLED
LED_EN High
Threshold
2.0
--
--
--
--
--
--
0.3
--
Volt
Volt
Volt
Volt
VENH
VENL
LED_EN Low
Threshold
PWM High
Threshold
3.0
--
VPWMH
VPWML
PWM Low
Threshold
0.2
--
--
300
--
PWM Frequency
PWM Duty Cycle
200
10
Hz
%
FPWM
TD
Note(1)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
19/26
1.0
Note: PWM Duty Cycle. Pulse duty the bigger the brighter.
T
Duty Cycle TD= (t / T) x 100%
t
6.7.3 LED Power on/off sequence
T1 T2
T3
T4
T5
LED Power Supply, VLED
0.9VLED
0.9VLED
0.1VLED
0.1VLED
0V
Dimming Signal, PWM
0V
LED Enable, LED_EN
0V
Value
Symbol
Unit
Min
Typ
--
Max
--
T1
T2
T3
T4
T5
10
10
50
0
--
--
ms
--
--
--
--
10
--
--
Note: The duty of LED dimming signal should be more than 20% in T2 and T3
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
20/26
1.0
7.0 Reliability test items
No.
1
Item
Conditions
Ta=+60oC, 240hrs
Ta=-20oC, 240hrs
Ta=+50oC, 500hrs
Ta=0oC, 500hrs
Remark
High Temperature Storage
Low Temperature Storage
High Temperature Operation
Low Temperature Operation
2
3
4
5
Thermal Cycling Test (non operation) -20oC(30min)→+60oC(30min),100 cycles
Vibration
Sine Wave
6
7
1.5G, 5~500Hz, XYZ
30min/each direction
Half-Sine, 200G, 2ms, ±XYZ, 1time
Shock
Storage / Operating temperature
100
90
Humidity (%)
80
60
40
Operating Range
Storage Range
10
0
0
20
40
50
-40
-20
60
Temperature (oC)
Note .Max wet bulb temp.=39oC
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
21/26
1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension (2009/7/10 update)
BM Assembly Tolerance
| A-A’ | ≤ 1 (mm)
| B-B’ | ≤ 1 (mm)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
22/26
1.0
8.2 Back View Outline Dimension (2009/10/16 update)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
23/26
1.0
9.0 LOT MARK
9.1 Lot Mark
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
Code 1,2,3,4,5,6: HannStar internal flow control code.
Code 7: production location.
Code 8: production year.
Code 9: production month.
Code 10,11,12,13,14,15: serial number.
Note (1) Production Year
Year
Mark
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
1
2
3
4
5
6
7
8
9
0
Note (2) Production Month
Month
Mark
Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec.
1
2
3
4
5
6
7
8
9
A
B
C
9.2 Location of Lot Mark
(1) Location : The label is attached to the backside of the LCD module. See Product back
view. ( Section 8.0 : OUTLINE DIMENSION )
(2) Detail of the Mark : As attached below
(3) This is subject to change without prior notice.
HSD101PFW2
Rev: *
-A EDX.X 6 A0
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
24/26
1.0
10.0 PACKAGE SPECIFICATION
10.1 Packing form
LCM Model
LCM Qty. in the box
Notice
Inner Box Size (mm)
460 x 316 x 321H
HSD101PFW2-A
50 pcs/box
10.2 Packing assembly drawings
HSD101PFW1-A
Material
Notice
Box
Corrugated Paper Board
Corrugated Paper Board
Corrugated Paper Board
(AB Flute)
(B Flute)
Partition/Pad
Corner Pad
(AB Flute)
ESD bag
PE
--
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
25/26
1.0
11.0 GENERAL PRECAUTION
11.1 Use Restriction
This product is not authorized for use in life supporting systems, aircraft navigation control
systems, military systems and any other application where performance failure could be
life-threatening or otherwise catastrophic.
11.2 Disassembling or Modification
Do not disassemble or modify the module. It may damage sensitive parts inside LCD
module, and may cause scratches or dust on the display. HannStar does not warrant the
module, if customers disassemble or modify the module.
11.3 Breakage of LCD Panel
11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid
crystal, and do not contact liquid crystal with skin.
11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.
11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and
rinse thoroughly with water.
11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is
broken.
11.4 Electric Shock
11.4.1. Disconnect power supply before handling LCD module.
11.4.2. Do not pull or fold the LED cable.
11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector
or cables in order to prevent electric shock.
11.5 Absolute Maximum Ratings and Power Protection Circuit
11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage
variation, input voltage variation, variation in parts’ parameters, environmental
temperature, etc., otherwise LCD module may be damaged.
11.5.2. Please do not leave LCD module in the environment of high humidity and high
temperature for a long time.
11.5.3. It’s recommended to employ protection circuit for power supply.
11.6 Operation
11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.
11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons
handle the LCD module for incoming inspection or assembly.
11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft
material.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
HannStar Display Corp.
Document Title
Document No.
HSD101PFW2-A Formal Specification
Page No.
Revision
26/26
1.0
11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops
contact with polarizer for a long time, they may causes deformation or color
fading.
11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little
petroleum benzine or other adequate solvent.
11.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners tightly.
11.8 Static Electricity
11.8.1 Protection film must remove very slowly from the surface of LCD module to
prevent from electrostatic occurrence.
11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is
very weak to electrostatic discharge. Please be careful with electrostatic
discharge. Persons who handle the module should be grounded through
adequate methods.
11.9 Strong Light Exposure
The module shall not be exposed under strong light such as direct sunlight. Otherwise,
display characteristics may be changed.
11.10 Disposal
When disposing LCD module, obey the local environmental regulations.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed,
distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
相关型号：
©2020 ICPDF网 联系我们和版权申明