D3869-6302AR [3M]
TWO PART BOARD CONNECTOR;型号: | D3869-6302AR |
厂家: | 3M ELECTRONICS |
描述: | TWO PART BOARD CONNECTOR 连接器 |
文件: | 总5页 (文件大小:739K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
D3000 Series
•ꢀ Military (with 3M’s 3518 & N3518 polarizing key)
and centerbump polarization
•ꢀ Optional ejector latches
•ꢀ Mounting holes for securing header to board
•ꢀ Optional polarizing posts available
•ꢀ High temperature insulator suitable for “no lead”
soldering operations
•ꢀ High temperature insulator in through-hole version
suitable for “paste in hole” reflow soldering
•ꢀ RoHSꢀCompliant.ꢀSeeꢀtheꢀRegulatoryꢀInformationꢀ
Appendixꢀ(RIA)ꢀinꢀtheꢀ“RoHSꢀcompliance”ꢀsectionꢀofꢀ
www.3Mconnectors.comꢀforꢀcomplianceꢀinformationꢀꢀ
(RIAꢀE1ꢀandꢀC1ꢀapply)
Date Modified: May 21, 2012
TS-2245-F
Sheet 1 of 4
Physical
Insulator:
Material: High Temp Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Black (PCT)
Contact:
Material: Brass
Plating:
Underplating:
50 -150 μ” [ 1.25 μm ] Ni
WipingArea: 15 μ” [0.381 μm] Gold
Solder Tails: 40 - 120 μ” [ 1-3 μm ] Matte Tin
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
5.00A, 1 Contact Powered
3.00A, 6 Contacts Powered
1.75A, All Contacts Powered
Current Rating:
Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20%
derated. Reference appropriate 3M Product Specification for detailed current
derating curves.
>1 × 109 Ω at 500VDC
Insulation Resistance:
Withstanding Voltage:
1,000VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
260°C, profile per J-STD-020C, single pass
1 (per J-STD-020C)
Process Rating:
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
D3000 Series
-X2XX
-X3XX
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
-X0XX
Header with
Header without Latch Ejector
Long Ejector/Latch
for 3M Sockets with
Strain Relief
.08
[2.0]
.08
[2.0]
.573 .010
[ 14.55 ]
.424 .010
[ 10.77 ]
1.07 Ref
[27.2]
.97 Ref
[24.6]
.37 Ref
[9.4]
.46 Ref
[11.7]
.025 .002 Sq Typ
[ 0.64 ]
D
.28
7.1
.100
2.54
REF.
.020
0.51
.24
[6.1]
.34
8.6
.25
6.4
.13
.30
[7.6]
3.3
.100
REF.
2.54
2X O .100 [2.54]
SEE NOTE #2
POSITION #1
B
Dim. E
C
L
“Y”
Notch A
(See Table 1 & Note1)
F Typ
Position 1
Orientation
Triangle
Notch B
Section A-A
(Straight)
(See Table 1)
Notch C
(See Table 1 & Note 1)
.025 .002 Sq Typ
[ 0.64 ]
.16
[4.1]
.21
[5.3]
A
B
.24
[6.1]
.68
[17.3]
F Typ
“Y”
.12
[3.0]
.35
[8.9]
.30
[7.6]
C
L
.020
[0.51]
Dim. E
.197
[5.00]
.049 Ref
[1.24]
B
A
.20
[5.1]
C
A
2X ø .100
[2.54]
(See Note 2)
.100 Ref
[2.54]
Section B-B
(Right Angle)
TS-2245-F
Sheet 2 of 4
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
D3000 Series
Table 1
Dimensions
3M Part
Pin Qty
Polarizing
Notches
Number
A
B
C
D
06
08
10
14
16
20
24
26
30
34
40
50
60
64
3869
3889
3793
3314
3408
3428
3627
3429
3440
3431
3432
3433
3372
3764
1.065 (27.05)
1.165 (29.59)
1.265 (32.13)
1.465 (37.21)
1.565 (39.75)
1.765 (44.83)
1.965 (49.91)
2.065 (52.45)
2.265 (57.53)
2.465 (62.61)
2.765 (70.23)
3.265 (82.93)
3.765 (95.63)
3.965 (100.71)
0.905 (22.99)
1.005 (25.53)
1.105 (28.04)
1.305 (33.12)
1.405 (35.66)
1.605 (40.74)
1.805 (45.82)
1.905 (48.36)
2.105 (53.44)
2.305 (58.52)
2.605 (66.14)
3.105 (78.84)
3.605 (91.54)
3.805 (96.62)
0.665 (16.89)
0.765 (19.43)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.565 (39.75)
1.665 (42.29)
1.865 (47.37)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.505 (12.83)
0.605 (15.37)
0.705 (17.91)
0.905 (22.99)
1.005 (25.53)
1.205 (30.61)
1.405 (35.69)
1.505 (38.23)
1.705 (43.31)
1.905 (48.39)
2.205 (56.01)
2.705 (68.71)
3.205 (81.41)
3.405 (86.49)
B*
B*
Inch
(mm)
BC
Tolerance Unless Noted
BC
.00
.01
.000
.005
.0
.1
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
[ ] Dimensions for
Reference only
* Available without center notch B. Contact 3M.
Table 2
Pin Cross Section
Diagonals
3M Part
Contact Tail
Number Suffix
Dim E
Dimension G
Dim F
Corner Radii
-5XX2
-6XX2
Solder Tail for
.062 [1.57]
Thick PC Board
.0075 Ref
[0.191]
Ø.035 .003
[0.89] (See Note 3)
.112 .010
[2.84]
.0245 .0005
[0.622]
.028 ..001
[0.71]
or ø.116
[2.95]
ø.106
[2.69]
ø.106
[2.69]
or
ø.116
[2.95]
.41
[10.4]
Max to Edge of PCB
for Daisy Chain
(See Note 2)
(See Note 2)
.300
[7.62]
Dim G
Side to Side Stackability
Dim G
"Y"
C
L
C
L
“Y”
Position 1
Position 1
.029
.060
[1.52]
[0.74]
.100 .003
[2.54]
.100 .003
[2.54]
.100 .003
[2.54]
.232
[5.89]
.352
[8.94]
.100 .003
[2.54]
B
C
Recommended Mounting Hole Pattern
Recommended Mounting Hole Pattern
(Straight)
(Right Angle)
Notes:
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole.
For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used. See illustrations on page 4.
3. Contact your 3M sales representative for custom requirements.
Ordering Information
D3XXX - XX02AR
3M Part Number
Tail
Pin Configuration
5 = Right Angle Solder Tails
6 = Straight Solder Tails
(See Table 1)
02 = for .062 [1.57] thick board
Latch/Ejector System
0 = No Latch/Ejector installed
2 = Short Roll Pin Latch/Ejectors
3 = Long Roll Pin Latch/Ejectors
TS-2245-F
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ Four-Wall Header
,ꢀAccessories
.100” × .100” Latch/Ejector, Straight and RightAngle
D3000 Series
Part Customization
This spec sheet details our standard offering.
Polarizing Post
3M has several capabilities that can provide a
part tailored to your specific needs. Ask your
3M sales representative or customer service for
more details.
.321
[8.15]
3201-4
LC P
B lac k
.100 Dia
[2.54]
•ꢀTheꢀ-2ꢀ&ꢀ-3ꢀrollꢀpinꢀlatchesꢀ(mayꢀbeꢀorderedꢀ
Note: Insert Post into one mounting hardware hole on
bottom of header. Set post to protrude .115” [2.92]
separately with roll pins included)
•ꢀ
Snap-inꢀstyleꢀlatch/ejectorsꢀinꢀeitherꢀshortꢀ
(N3XXXX5XXX) or long (N3XXX-X6XX)
styles, may also be ordered separately, and are
functional and dimensional equivalents to the
-2 and -3 roll pin latches.
Polarizing Keys
N3518
LCP
Black
.02
If ordering latches separately, please use the below chart
Short Latch Long Latch
Latch Style
Color
Black
Black
High Temperature (PPA)
High Temperature (PCT)
N3505-30B
N3505-2B
N3505-31B
N3505-3B
Snap In
Roll Pin
.09
[2.3]
Breakaway Tab
.34 Ref
[8.6]
A
• Selective pin removal (ATA or other compatability)
.15
[3.8]
Note: #2216 B/A Scotchweld can be used to adhere keys.
Mounting Hardware
3341-6
(Must be inserted prior to latch on
vertical headers)
3341-5
(Installed from bottom of board)
.50
[12.7]
.31
[7.9]
Hex Head Bolt, Nut and Washer
Bolt - #2-56 X 1/2”
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
3341-5 & 6
Material - Stainless Steel
TS-2245-F
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-E
相关型号:
©2020 ICPDF网 联系我们和版权申明