9126-4500PL [3M]
26 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT;
| 型号： | 9126-4500PL |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 26 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT PC 连接器 |
| 文件： | 总4页 (文件大小：319K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Polarized Boardmount Socket
.100″ × .100″ Centerbump Polarization with Straight Solder Tails
9100 Series
• Standard centerbump with straight solder tails
• Mates with low profile shrouded headers
• Part number on each piece
• Optional keying plug
• 20-64 contacts
• Military Dual polarization
• Board retention feature
• See regulatory information appendix (RIA) for
chemical compliance information
Date Modified: September 27, 2007
TS-0690-B
Sheet 1 of 2
Physical
Insulation
Material:
Glass Filled Polyester (PBT)
Flammability:
Color:
UL 94V-0
Gray
Contact
Material:
Copper Alloy
Plating
Underplating:
Wiping Area:
Solder Tails:
Marking:
2 μm [ 79 μ″ ] Nickel
0.3 μm [ 12 μ″ ] Gold
Gold flash
3M Logo, Part Identification Number and Orientation Triangle
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
1 A
9
> 1 × 10 Ω at 500 V
DC
1000 V
at Sea Level
RMS
Environmental
Temperature Rating:
-55°C to +105°C
Process Rating:
Maximum insulator temperature 191°C (Solder Wave Process Only)
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Polarized Boardmount Socket
.100″ × .100″ Centerbump Polarization with Straight Solder Tails
9100 Series
Contact
Quantity
Dimension A
20
26
34
40
50
60
64
29.9 [ 1.18 ]
37.5 [ 1.48 ]
47.7 [ 1.88 ]
55.3 [ 2.18 ]
68.1 [ 2.68 ]
80.7 [ 3.18 ]
85.8 [ 3.38 ]
A
3.6
[ .14 ]
Position 2
6.1
[ .24 ]
2.54
[ .100 ]
2.54 Typ
[ .100 ]
Position 1
1.0
Centerbump (Standard)
[ .04 ]
9.0
[ .354 ]
Military:
Dual Polarization
Slots
2.8
[ .11]
3.4
[ .13 ]
0.57
[ .022 ]
Triangle
Indicates
Position 1
0.32
[ .013 ]
0.70
[ .028 ]
See Note 1
2.54 Ref
[ .100 ]
2.54 Ref
[ .100 ]
0.45
[ .018 ]
Breakaway
Tab
3435
6.1
[ .24 ]
1.30
[ .051 ]
0.81
[ .032 ]
0.66
[ .026 ]
2.54
[ .100 ]
3435-0
Keying Plug
(Optional: Order Separately)
2.54
[ .100 ]
∅.90 Typ
[ .035 ]
mm
[Inch]
Recommended Mounting Hole Pattern
(Shown for Top Side of PC Board)
Tolerance Unless Noted
.0
± .3 ± .15
.00
.000
mm
[ ] Dimensions for
Reference only
Notes:
1. The contact soldertail is designed to retain the connector on the PC board during flow soldering operations.
2. Recommended to be mated to the 2.54 [.100] × 2.54 [.100] low profile header and the 4600 series plug connector without ejector latches.
Ordering Information
Sockets
91XX - 4500PL
(RIA E1 & C1 apply)
Contact Quantity:
See Table
TS-0690-B
Sheet 2 of 2
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-b
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
RIA-2217B-b
1-800-225-5373
3M is a trademark of 3M Company.
相关型号：
91267-002LF
Board Connector, 4 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, LEAD FREE
AMPHENOL
91267-004LF
Board Connector, 8 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, LEAD FREE
AMPHENOL
91267-005LF
Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, LEAD FREE
AMPHENOL
91267-006LF
Board Connector, 12 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, LEAD FREE
AMPHENOL
91267-007LF
Board Connector, 14 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, LEAD FREE
AMPHENOL
©2020 ICPDF网 联系我们和版权申明