8306-SC/APC [3M]
126um, SINGLE MODE, SIMPLEX SC CONNECTOR;型号: | 8306-SC/APC |
厂家: | 3M ELECTRONICS |
描述: | 126um, SINGLE MODE, SIMPLEX SC CONNECTOR 瞄准线 光纤 连接器 |
文件: | 总36页 (文件大小:1075K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Communication Markets Division
3M Fiber
Connectors
3M Communications.
Bringing the world’s
networks together.
Headquartered in Austin, Texas, 3M’s Communication Markets Division
creates technology that makes the world a smaller place. From fiber to
passive optical LAN to wireless solutions, we’re helping increase the
speed of connections, while making sure networks stay up and running
around the clock and around the globe.
The world’s growing digital economy moves at the speed of
™
information. 3M Fiber Interconnect Solutions help our customers
take the lead with scalable options to help optimize speed, size and
interconnectivity for growing networks. Rely on 3M expertise to help
optimize existing network infrastructure and lay the foundation for
future evolutions.
For more information about 3M Communications visit
3M.com/Telecom.
2
™
3M Fiber Interconnect Solutions
We’re helping deliver the fastest fiber connections to homes, universities, hospitals, businesses and more. From
ferruled fiber connectors and adapters, to mechanical splices, cable assemblies and accessories, our products
are designed to meet increasing demand for speed and reliability.
Table of Contents
™
3M Field Installable Connectors
™
3M Crimplok + Connectors...............................................................................................................................5
3M No Polish Connectors (NPC) ..................................................................................................................... 8
3M Easy Cleaver ................................................................................................................................................. 14
3M Hot Melt Connectors .................................................................................................................................. 17
™
3M Crimplok Connectors.................................................................................................................................19
3M Epoxy Connectors ........................................................................................................................................20
™
3M Termination Kits
3M Crimplok+ Connector Kits.......................................................................................................................... 21
3M No Polish Connector Kits ............................................................................................................................22
3M Hot Melt Termination Kits.......................................................................................................................... 23
3M Crimplok Termination Kit ............................................................................................................................25
3M Epoxy Termination Tools............................................................................................................................. 26
™
™
3M Fibrlok Optical Splice System
3M Fibrlok Splices...............................................................................................................................................27
3M Fibrlok Splice Kits.........................................................................................................................................29
3
™
3M Field Installable
Connectors
Reliability and a craft-friendly installations make
3M field installable connectors popular among
contractors and industry professionals. 3M
connectors can help maximize time in the field with
factory-prepped shortcuts and high performance
tools. Choose from a full line of fiber connectors
with ceramic ferrules.
™
3M Fiber Connectors
Fiber Connector Selection Charts
3M Connector LC
SC
ST
FC
250/900 µm Jacketed
250/900 µm Jacketed
250/900 µm Jacketed
250/900 µm Jacketed
Crimplok™+
No Polish
Hot Melt
Crimplok
Epoxy
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
4
™
™
3M Crimplok + Connectors
™
™
3M Crimplok + Connectors provide fast, easy field termination of
250 μm and 900 μm singlemode and multimode fiber and 1.6 to 3.0
mm jacketed cable without a splice, gel or adhesive. The connectors
are SC compatible with a metallic element that mechanically locks
the fiber in place. To terminate, the fiber is cleaved, inserted through
™
™
the connector and locked in place using the 3M Crimplok +
™
™
Activation Tool and the fiber tip polished with the 3M Crimplok +
Nano Finishing Tool. This hand tool utilizes a polishing film and an
orbital mechanism that polishes with a single turn of the handle. Once
completed, the connector is cleaned and ready for use. The Crimplok+
Connectors and Tools are RoHS compliant.*
™
™
3M Crimplok + 250µm/900µm
Connector Family
Crimplok+ connectors have a thermally balanced design that is tested
for premises and FTTP applications for indoor and outdoor conditions.
Features and Benefits
™
™
3M Crimplok + Connectors
No splice, gel or adhesive
No splice interface/potential optical
loss point
Simple assembly tools
Fast, easy installation without electrical
power
™
™
3M Crimplok + Singlemode Jacketed
Angle nano finishing tool for SC/APC
connectors
Helps eliminate high CapEx of angle
cleaver
Connectors
Polishing film with every connector
Always have new polishing film
Field termination
Always the right cable length with virtually
no cable slack to store
™
™
3M Crimplok + Activation Tool, a
Singlemode SC APC 250/900um
connector and a lapping film
5
™
™
3M Crimplok + Connector 250µm/900µm SC Series Specifications
Multimode
Singlemode
Product Number
6700-AT/62.5
6700-AT/50
6700 AT/-50LOMFF 8700-AT/UPC 8700-AT/APC
Connector identification
Beige/White
0.2
Black/White
0.2
Aqua/White
0.2
Blue/White
0.2
Green/White
0.25
Insertion loss (dB)
Typical
Reflectance (dB)
Typical at room temp
<-25
<-25
<-30
<-30
<-30
<-30
<-40
<-35
<-65
<-60
Reflectance (dB)
Over operating
temperature range
Operating temperature
range
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-40°C to 75°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
Storage temperature
Material
Connector ferrule
Connector housing
and body
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Boot
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Installation tool
8765-AT/UPC
8765-NF/UPC
8765T-UPC
8765-AT/UPC
8765-NF/UPC
8765T-UPC
8765-AT/UPC
8765-NF/UPC
8765T-UPC
8765-AT/UPC
8765-NF/UPC
8765T-UPC
8765-AT/APC
8765-NF/APC
8765T-APC
Nano finishing tool
Field termination kit
™
™
3M Crimplok + Jacketed Connector Specifications
Singlemode
Product Number
8702/UPC/1.6-3
8702/APC/1.6-3
Connector identification
Blue/White
0.2
Green/White
0.3
Insertion loss (dB)
Typical
Reflectance (dB)
Typical at room temp
<-40
<-35
<-65
<-60
Reflectance (dB)
Over operating temperature range
Operating temperature range
Storage temperature
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
Material
Connector ferrule
Connector housing
and body
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Boot
Thermoplastic elastomer
Thermoplastic elastomer
Installation tool
8765-PS/UPC/JT
8765-PS/APC/JT
Nano finishing tool
Field termination kit
8765-NF/UPC
8765-NF/APC
8765T-UPC/250-900-JKT
8765T-APC/250-900-JKT
6
™
™
3M Crimplok + Connector Ordering Information
Product Number
Description
Packaging
Min. Order 3M ID
8700-AT/UPC
Crimplok+ Connector SC/UPC SM 250/900 μm with
Activation Tool
60/package
60 each
60 each
60 each
60 each
60 each
80-6116-2208-7
8700-AT/APC
6700-AT/62.5
6700-AT/50
Crimplok+ Connector SC/APC SM 250/900 μm with
Activation Tool
60/package
60/package
60/package
60/package
80-6116-2200-4
80-6116-2211-1
80-6116-2209-5
80-6116-2210-3
Crimplok+ Connector SC MM 62.5 μm (OM1) 250/900 μm
with Activation Tool
Crimplok+ Connector SC MM 50 μm (OM2) 250/900 μm
with Activation Tool
6700-AT/50LOMMF
Crimplok+ Connector SC MM 50 μm LOMMF (OM3/4)
250/900 μm with Activation Tool
™
™
3M Crimplok + Jacketed Connector Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
™
™
8702/UPC/1.6-3
8702/APC/1.6-3
8765-PS/UPC/JT
3M Crimplok + SC/UPC Jacketed Connector
60/package
60/package
1/package
60 each
60 each
1 each
80-6114-9633-4
80-6114-9632-6
80-6114-9642-5
™
™
3M Crimplok SC/APC Jacketed Connector
Protrusion Setting Tool with fiber holder for jacketed
SC/UPC connector
8765-PS/APC/JT
8765-UPC/ADD
8765-APC/ADD
Protrusion Setting Tool with fiber holder for jacketed
SC/APC connector
1/package
1 each
1 each
1 each
80-6114-9643-3
80-6115-9646-6
80-6114-9647-5
Protrusion Setting Tool SC/UPC with fiber holder and 1/package
two jacket slitting tools
Protrusion Setting Tool SC/APC with fiber folder and
1/package
two jacket slitting tools
7
™
3M No Polish Connectors (NPC)
3M No Polish Connectors help enable fast, on-site installation of 250 μm and 900 μm singlemode
and multimode fiber and 1.6 to 3.0 mm jacketed cable. With a factory-polished ferrule assembly and a
mechanical splice, the connector can be quickly installed — without electrical power — using a simple field
tool that is included in every box of 60 connectors (when required). For excellent mechanical performance,
the 3M NPC has internal gripping elements for the strain relief of the fiber.
The 250/900 µm SC and LC 3M NPCs utilize a one-piece, pre-assembled design that eliminates field
polishing and loose parts. The SC and LC 3M NPCs for jacketed cable can be installed without an assembly
tool. A twist-on boot clamps onto the cable jacket and aramid fiber to provide excellent strain relief.
The SC/APC and LC/APC compatible 3M NPC are available with a standard, flat splice configuration or
with a keyed, angle splice for excellent back reflection. To maximize installation yield, the splice in the
connector can be opened and re-terminated with a cap lifter. The assembly tool and cap lifter are included
in every box of 60 connectors (when required).
Features and Benefits
™
3M No Polish Connectors
Field termination
Right cable length with no cable slack to store
Simple assembly tool
Fast, easy installation
250/900 µm Connectors and
Jacketed connectors available
Potentially improve supply chain and inventory
management
Factory-polished fiber stub
No on-site polish or adhesives required
in ferrule
Keyed, angle cleave splice
for APC
Low reflectance, <-60 dB across temperature extremes
™
3M No Polish SC Connector Ordering Information
Packaging
Min. Order (connectors Assemby Cleaver
Connector per box) Tools incl. incl.
Easy
Product Number
Description
3M ID
8800-APC/FS/C
SM No Polish SC/APC Connector flat 80-6114-9412-3
splice with Easy Cleaver
120
120
120
120
120
2 sets
1 unit
1 unit
1 unit
1 unit
8800/C
SM No Polish SC/UPC Connector
80-6114-9411-5
120
2 sets
with Easy Cleaver
8802-T/1.6-3/C
SM No Polish SC/UPC Connector
1.6-3.0 mm Jacket with Easy Cleaver
80-6114-8225-0 120
80-6114-8226-8 120
not
needed
not
needed
8802-T/APC/FS/1.6-3/C SM No Polish SC/APC Connector
1.6-3.0 mm Jacket flat splice with
Easy Cleaver
6800-50/C_60
MM No Polish SC Connector 50 μm
with Easy Cleaver
MM No Polish SC Connector 50 μm
laser optimized with Easy Cleaver
MM No Polish SC Connector 62.5 μm 80-6114-9421-4
80-6114-9419-8
60
60
60
60
60
1 set
1 set
1 set
1 unit
1 unit
1 unit
1 unit
6800-50LOMMF/C_60
6800-62.5/C_60
80-6114-9420-6 60
60
with Easy Cleaver
6802-T/50/1.6-3/C_60
MM No Polish SC/UPC Connector
50 μm 1.6-3.0 mm Jacket with
Easy Cleaver
MM No Polish SC/UPC Connector
50 μm LOMMF 1.6-3.0 mm Jacket
with Easy Cleaver
80-6114-9422-2 60
80-6114-9423-0 60
80-6114-9424-8 60
not
needed
6802-T/50LOMMF/
1.6-3/C_60
60
60
not
needed
1 unit
1 unit
6802-T/62.5/1.6-3/C_60 MM No Polish SC/UPC Connector
62.5 μm 1.6-3.0 mm Jacket with
not
needed
Easy Cleaver
8
™
3M No Polish SC Connector Family
™
3M No Polish SC Connector Specifications
Multimode
Singlemode
Connector Type
Product Number
SC
SC
SC
SC
SC/APC
SC/APC
6800-50
6800-50LOMMF 6800-62.5
8800
8800-APC/FS
8800-APC/AS
Connector
identification
Backbone color
Shell color
Black
Black
White
Black
Aqua
White
Black
Beige
White
Black
Blue
White
Black
Green
White
Black
Green
Green
Housing color
Cable jacket size
(mm)
1.6, 2.0, 3.0
1.6, 2.0, 3.0
1.6, 2.0, 3.0
1.6, 2.0, 3.0
1.6, 2.0, 3.0
1.6, 2.0, 3.0
Fiber type
50 µm MM
(OM2)
50 μm LOMMF
(OM3/4)
62.5 µm MM
(OM1)
SM
SM
SM
Cleave
Flat
Flat
Flat
Flat
Flat
Angle
8865-AT
0.3
Assembly tool
8865-AT
0.2
8865-AT
0.2
8865-AT
0.2
8865-AT
0.3
8865-AT
0.3
Insertion loss (dB)
Typical
Reflectance (dB)
Typical at room temp
<-30
<-30
<-30
<-30
<-25
<-25
<-40
<-35
<-55
<-35
<-65
<-60
Reflectance (dB)
Over operating
temperature range
Operating
temperature range
-10 to 60°C
-10°C to 60°C
-40°C to 85°C
-10°C to 60°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
Storage temperature
-40°C to 85°C
Material
Connector ferrule
Zirconia ceramic Zirconia ceramic
Engineered resin Engineered resin
Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic
Engineered resin Engineered resin Engineered resin Engineered resin
Connector housing
and body
Boot
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Field termination kit
8865-C or
8865-C or
8865-C or
8865-C or
8865-C or
2565
(no power needed)
8865-C/PR
8865-C/PR
8865-C/PR
8865-C/PR
8865-C/PR
9
™
3M No Polish Jacketed SC/UPC Connector Family
™
3M No Polish Connector SC/UPC Jacket Specifications
Multimode
Singlemode
8802-T/1.6-3
Product Number
6802-T/50/1.6-3
6802-T/50/LOMMF/1.6-3
8802-T/62.5/1.6-3
Connector identification
Backbone color
Shell color
Black
Black
White
Black
Aqua
White
Black
Beige
White
Black
Blue
White
Housing color
Cable jacket size
1.6, 2.0, 3.0
1.6, 2.0, 3.0
1.6, 2.0, 3.0
1.6, 2.0, 3.0
Housing color
Insertion Loss (dB)
0.2
0.2
0.2
0.3
Typical
Reflectance (dB)
<-30
<-30
<-25
<-40
Typical at room temp
Reflectance (dB)
Over operating
<-30
<-30
<-25
<-35
temperature range
Operating temperature range
Storage temperature
-10°C to 60°C
-40°C to 85°C
-10°C to 60°C
-40°C to 85°C
-10°C to 60°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
Material
Connector ferrule
Connector housing and body Engineered resin
Boot
Zirconia ceramic
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic
elastomer
Zirconia ceramic
Engineered resin
Thermoplastic
elastomer
Thermoplastic
elastomer
Field termination kit (optional) 8865-C or 8865-C/PR 8865-C or 8865-C/PR
8865-C or 8865-C/PR 8865-C or 8865-C/PR
™
3M No Polish Connector SC/UPC Jacket Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
6802-T/50/1.6-3
No Polish SC/UPC Connector MM 50 μm 1.6-3.0 mm
Jacket
60/package
60 each
80-6113-9828-2
6802-T/50/
LOMMF/1.6-3
No Polish SC/UPC Connector MM 50 μm LOMMF
1.6-3.0 mm Jacket
60/package
60 each
60 each
80-6113-9829-0
80-6113-9830-8
6802-T/62.5/1.6-3
8802-T/1.6-3
No Polish SC/UPC Connector MM 62.5 μm 1.6-3.0 mm 60/package
Jacket
No Polish SC/UPC Connector SM 1.6-3.0 mm Jacket
60/package
60 each
80-6113-3507-8
10
™
3M No Polish SC/APC Connector Flat and Angle Splice
1.6-3 mm Jacket
™
3M No Polish Jacketed SC/APC Connector Specifications
Singlemode
Product Number
8802-T/APC/AS/1.6-3
8802-T/APC/FS/1.6-3
Connector identification
Backbone color
Shell color
Green
Green
White
Black
Green
White
Housing color
Cable jacket size (mm)
1.6, 2.0, 3.0
0.3
1.6, 2.0, 3.0
0.3
Insertion Loss (dB)
Typical
Reflectance (dB)
Typical at room temp
<-65
<-60
<-55
<-35
Reflectance (dB)
Over operating temperature range
Operating temperature range
Storage temperature
-40°C to 75°C
-40°C to 85°C
Green/Green
2565 (required)
-40°C to 75°C
-40°C to 85°C
Connector identification
Field termination kit
Green/Black
8865-C or 8865-C/PR (optional)
™
3M No Polish Jacketed SC/APC Connector Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
8802-T/APC/AS/1.6-3
No Polish SC/APC Connector Angle Splice
1.6-3 mm Jacket
60/package
60 each
80-6113-3505-2
8802-T/APC/FS/1.6-3
No Polish SC/APC Connector Flat Splice
1.6-3 mm Jacket
60/package
60 each
80-6113-3509-4
11
™
3M No Polish LC Connector Specifications
Multimode
Singlemode
LC/APC
Connector Type
Product Number
Applications
LC
LC
LC
LC
LC/APC
6830-50
Data
6830-50LOMMF 6830-62.5
8830
8830-APC/FS
8830-APC/AS
Data
Data
Data, IPTV
Data, IPTV
Data, IPTV,
Analog TV
Connector
identification
Backbone color
Shell color
Black
Black
White
Black
Aqua
White
Black
Beige
White
Black
Blue
White
Black
Green
White
Black
Green
Green
Housing color
Fiber type
50 µm MM
(OM2)
50 µm LOMMF
(OM3/4)
62.5 µm MM
(OM 1)
SM
SM
SM
Cleave
Flat
Flat
Flat
Flat
Flat
Angle
8835-AT
0.3
Assembly tool
8835-AT
0.2
8835-AT
0.2
8835-AT
0.2
8835-AT
0.3
8835-AT
0.3
Insertion loss (dB)
Typical
Reflectance (dB)
Typical at room temp
<-30
<-30
<-30
<-30
<-25
<-25
<-40
<-35
<-55
<-35
<-65
<-60
Reflectance (dB)
Over operating
temperature range
Operating
temperature range
-10°C to 60°C
-40°C to 85°C
-10°C to 60°C
-40°C to 85°C
-10°C to 60°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
-40°C to 75°C
-40°C to 85°C
Storage temperature
Material
Connector ferrule
Zirconia ceramic Zirconia ceramic
Engineered resin Engineered resin
Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic
Engineered resin Engineered resin Engineered resin Engineered resin
Connector housing
and body
Boot
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Field termination kit
8865-C or
8865-C or
8865-C or
8865-C or
8865-C or
2565
(no power needed)
8865-C/PR
8865-C/PR
8865-C/PR
8865-C/PR
8865-C/PR
12
™
3M No Polish LC Connector Family
™
3M No Polish LC Connector Ordering Information
Packaging
Min. Order (connectors Assemby Cleaver
Connector per box) Tools incl. incl.
Easy
Product Number
Description
3M ID
8830-APC/FS/C
SM No Polish LC/APC Connector flat
splice with Easy Cleaver
SM No Polish LC/UPC Connector
with Easy Cleaver
SM No Polish LC/UPC Connector
1.6-2.0 mm Jacket with Easy Cleaver
MM No Polish LC Connector 50 μm
with Easy Cleaver
MM No Polish LC Connector 50 μm
laser optimized with Easy Cleaver
80-6114-9416-4
120
120
120
120
120
120
60
2 sets
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
8830/C
80-6114-9415-6
80-6114-9417-2
2 sets
8832-T/1.6-2/C
not
needed
6830-50/C_60
80-6114-9425-5 60
80-6114-9426-3 60
1 set
1 set
1 set
6830-50LOMMF/C_60
6830-62.5/C_60
6832-T/50/1.6-2/C_60
60
MM No Polish LC Connector 62.5 μm 80-6114-9427-1
with Easy Cleaver
60
60
MM No Polish LC/UPC Connector
50 μm 1.6-2.0 mm Jacket with
Easy Cleaver
MM No Polish LC/UPC Connector
50 μm LOMMF 1.6-2.0 mm Jacket
with Easy Cleaver
80-6114-9428-9 60
80-6114-9429-7 60
80-6114-9430-5 60
60
not
needed
6832-T/50LOMMF/
1.6-2/C_60
60
60
not
needed
1 unit
1 unit
6832-T/62.5/1.6-2/C_60 MM No Polish LC/UPC Connector
62.5 μm 1.6-2.0 mm Jacket with
not
needed
Easy Cleaver
13
™
3M No Polish Connector LC/UPC Jacket Specifications
Multimode
Singlemode
8832-T/1.6-2
Product Number
6832-T/50/1.6-2
6832-T/50/LOMMF/1.6-2 6832-T/62.5/1.6-2
Connector identification
Backbone color
Shell color
Black
Black
White
Black
Aqua
White
Black
Black
White
Black
Blue
White
Housing color
Cable jacket size (mm)
1.6, 2.0
0.2
1.6, 2.0
0.2
1.6, 2.0
0.2
1.6, 2.0
0.3
Insertion loss (dB)
Typical
Reflectance (dB)
Typical at room temp
<-30
<-30
<-30
<-30
<-25
<-25
<-35
<-40
Reflectance (dB)
Over operating
temperature range
Operating temperature range
Storage temperature
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
Material
Connector ferrule
Connector housing and body
Boot
Zirconia ceramic
Engineered resin
Thermoplastic
elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic
elastomer
Zirconia ceramic
Engineered resin
Thermoplastic
elastomer
Field termination kit
8865-C or
8865-C/PR
8865-C or
8865-C/PR
8865-C or
8865-C/PR
8865-C or
8865-C/PR
™
3M No Polish Connector LC/UPC Jacket Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
8832-T/1.6-2
No Polish LC/UPC Connector SM 50 μm
1.6-2.0 mm Jacket
60/package
60 each
60 each
60 each
60 each
80-6113-9839-9
6832-T/50/1.6-2
No Polish LC/UPC Connector MM 50 μm
1.6-2.0 mm Jacket
60/package
60/package
60/package
80-6113-9840-7
80-6113-9841-5
80-6113-9842-3
6832-T/50/
LOMMF/1.6-2
No Polish LC/UPC Connector MM 50 μm LOMMF
1.6-2.0 mm Jacket
6832-T/62.5/1.6-2
No Polish LC/UPC Connector MM 62.5 μm
1.6-2.0 mm Jacket
14
™
3M No Polish ST Connector Family
™
3M No Polish ST Connector Specifications
Multimode
Singlemode
Product Number
6840-50
6840-50/LOMMF
6840-62.5
8840
Connector identification
Backbone color
Shell color
Black
Black
White
Black
Aqua
White
Black
Beige
White
Black
Blue
White
Housing color
Insertion loss (dB)
0.2
0.2
0.2
0.3
Typical
Reflectance (dB)
Typical at room temp
<-30
<-30
<-30
<-30
<-25
<-25
<-40
<-35
Reflectance (dB)
Over operating
temperature range
Operating
temperature range
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
-10°C to 60°C
Storage temperature
Connector identification
Housing
Boot
Black
White
Aqua
White
Beige
White
Blue
White
Material
Connector ferrule
Connector housing and body Engineered resin
Zirconia ceramic
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Zirconia ceramic
Engineered resin
Boot
Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer
Field Termination Kit
8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR 8865-C or 8865-C/PR
™
3M No Polish ST Connector Ordering Information
Product Number
Description
Packaging
Min. Order 3M ID
6840-50
No Polish ST Connector MM 50 µm, 250/900 buffer,
60 pack (black housing) with assembly tool
60/package 60 each
12/package 12 each
60/package 60 each
12/package 12 each
60/package 60 each
12/package 12 each
60/package 60 each
12/package 12 each
80-6113-9511-4
80-6113-9514-8
80-6113-9512-2
80-6113-9515-5
80-6113-9513-0
80-6113-9516-3
80-6113-9517-1
80-6113-9518-9
80-6113-9519-7
6840-50/12
6840-50/LOMMF
6840-50/LOMMF/12
6840-62.5
No Polish ST Connector MM 50 µm, 250/900 buffer,
12 pack (black housing)
No Polish ST Connector MM 50 µm LO, 250/900 buffer,
60 pack (aqua housing) with assembly tool
No Polish ST Connector MM 50 µm LO, 250/900 buffer,
12 pack (aqua housing)
No Polish ST Connector MM 62.5 µm, 250/900 buffer,
60 pack (beige housing) with assembly tool
6840-62.5/12
8840
No Polish ST Connector MM 62.5 µm, 250/900 buffer,
12 pack (beige housing)
No Polish ST Connector SM, 250/900 buffer,
60 pack (blue housing) with assembly tool
8840/12
No Polish ST Connector SM, 250/900 buffer,
12 pack (blue housing)
8845-AT
No Polish ST Connector Assembly Tool
1 each
1 each
15
™
3M Easy Cleaver Combo
™
Available in select packages of connectors and splices, the 3M Easy
Cleaver is the latest cleaving innovation from 3M. The 3M Easy Cleaver
is designed to simplify installations and lower capital expenditure when
terminating all 3M flat-cleave, field-installable connectors and splices.
Unlike other blade-enabled fiber cleaving tools, the 3M Easy Cleaver
requires no maintenance because of its diamond wire cleaving
mechanism. Use it to create smooth end-faces repeatedly – each tool
performs up to 120 cleaves. See the ordering chart for specific details
on packaging.
™
3M Easy Cleaver
Features and Benefits
™
3M Easy Cleaver
Life cycle counter
Conveniently helps users to keep track of
cleaver life
Diamond wire shuttle
Virtually no maintenance or blade rotation
required, which can help reduce downtime
Innovative fiber clamp design
Provides precise and repeatable cleaves
Strip and cleave length markings
Clear indication of specified strip lengths for
3M connector and splice installations
Lightweight and durable
Suitable for both indoor and outdoor
work environments
™
3M Easy Cleaver
Specifications
Feature
Dimensions
Weight
133 ꢀ 68 ꢀ 29.5 mm (5.24 ꢀ 2.68 ꢀ 1.16 in) approx.
62 gm (2.2 oz) approx.
Compatible fibers
Buffered
Jacketed Cable
Drop Cable
250 µm / 900 µm tight buffer
Up to 3 mm
1.6 ꢀ 2 mm and 2 ꢀ 3 mm FRP
Perpendicular Cleave
Cleave lengths
Strip lengths
<3° typical
8 - 24 mm (Specific cleave length markings are 8, 10, 12.5, 19, 20 and 24 mm)
42 - 58 mm
Cleaver life
Approximately 120 cleaves*
Performance
Flat cleave: 3M field-installable connectors and splices perform to their individual specifications when
terminated with the 3M Easy Cleaver if the 3M Easy Cleaver is used per 3M instructions.
™
*Once 120 cleaves are performed, properly dispose of the cleaver per company practice.
Cleave Length Guide
3M Products
Cleave Length (mm)
Fiber Strip length (mm)
™
3M No Polish Connectors
8
42
46
52
58
™
™
3M Fibrlok II Splices
12.5
19
™
™
3M Crimplok + 250 µm Connectors
™
™
3M Crimplok + 900 µm Connectors
24
16
™
3M Easy Cleaver Ordering Information
Packaging
Min. Order (connectors Assemby Cleaver
Connector per box) Tools incl. incl.
Easy
Product No.
Description
3M ID
™
3M No Polish Connectors
SC Connector Type
8800-APC/FS/C
SM No Polish SC/APC Connector flat 80-6114-9412-3
splice with Easy Cleaver
120
120
120
120
120
120
2 sets
2 sets
1 unit
1 unit
1 unit
1 unit
8800/C
SM No Polish SC/UPC Connector
80-6114-9411-5
with Easy Cleaver
8802-T/1.6-3/C
SM No Polish SC/UPC Connector
1.6-3.0 mm Jacket with Easy Cleaver
80-6114-8225-0 120
80-6114-8226-8 120
not
needed
not
needed
8802-T/APC/FS/1.6-3/C SM No Polish SC/APC Connector
1.6-3.0 mm Jacket flat splice with
Easy Cleaver
6800-50/C_60
MM No Polish SC Connector 50 μm
with Easy Cleaver
MM No Polish SC Connector 50 μm
laser optimized with Easy Cleaver
MM No Polish SC Connector 62.5 μm 80-6114-9421-4
80-6114-9419-8
60
60
60
60
60
1 set
1 set
1 set
1 unit
1 unit
1 unit
1 unit
6800-50LOMMF/C_60
6800-62.5/C_60
80-6114-9420-6 60
60
with Easy Cleaver
6802-T/50/1.6-3/C_60
MM No Polish SC/UPC Connector
50 μm 1.6-3.0 mm Jacket with
Easy Cleaver
MM No Polish SC/UPC Connector
50 μm LOMMF 1.6-3.0 mm Jacket
with Easy Cleaver
80-6114-9422-2 60
80-6114-9423-0 60
80-6114-9424-8 60
not
needed
6802-T/50LOMMF/
1.6-3/C_60
60
60
not
needed
1 unit
1 unit
6802-T/62.5/1.6-3/C_60 MM No Polish SC/UPC Connector
62.5 μm 1.6-3.0 mm Jacket with
not
needed
Easy Cleaver
LC Connector Type
8830-APC/FS/C
SM No Polish LC/APC Connector flat
splice with Easy Cleaver
SM No Polish LC/UPC Connector
with Easy Cleaver
SM No Polish LC/UPC Connector
1.6-2.0 mm Jacket with Easy Cleaver
MM No Polish LC Connector 50 μm
with Easy Cleaver
MM No Polish LC Connector 50 μm
laser optimized with Easy Cleaver
80-6114-9416-4
80-6114-9415-6
80-6114-9417-2
120
120
120
120
120
120
60
2 sets
2 sets
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
8830/C
8832-T/1.6-2/C
not
needed
6830-50/C_60
80-6114-9425-5 60
80-6114-9426-3 60
1 set
1 set
1 set
6830-50LOMMF/C_60
6830-62.5/C_60
6832-T/50/1.6-2/C_60
60
MM No Polish LC Connector 62.5 μm 80-6114-9427-1
with Easy Cleaver
60
60
MM No Polish LC/UPC Connector
50 μm 1.6-2.0 mm Jacket with
Easy Cleaver
MM No Polish LC/UPC Connector
50 μm LOMMF 1.6-2.0 mm Jacket
with Easy Cleaver
80-6114-9428-9 60
80-6114-9429-7 60
80-6114-9430-5 60
60
not
needed
6832-T/50LOMMF/
1.6-2/C_60
60
60
not
needed
1 unit
1 unit
6832-T/62.5/1.6-2/C_60 MM No Polish LC/UPC Connector
62.5 μm 1.6-2.0 mm Jacket with
not
needed
Easy Cleaver
17
™
3M Easy Cleaver Ordering Information (continued)
Packaging
Assemby Easy
Min. Order (connectors Tools
Cleaver
incl.
Product No.
Description
3M ID
Connector per box)
incl.
ST Connector Type
8840/C
SM No Polish ST Connector
250/900 μm buffer and Easy Cleaver
80-6114-9418-0
80-6114-9431-3
80-6114-9432-1
120
60
60
120
60
60
2 sets
1 set
1 unit
1 unit
1 unit
6840-50/C_60
MM No Polish ST Connector 50 μm,
250/900 μm buffer and Easy Cleaver
MM No Polish ST Connector 50 μm
LO, 250/900 μm buffer and
Easy Cleaver
6840-50LOMMF/C_60
1 set
6840-62.5/C_60
MM No Polish ST Connector
62.5 μm, 250/900 μm buffer
and Easy Cleaver
80-6114-9433-9 60
60
1 set
1 unit
™
™
3M Crimplok + Connectors
8700-AT/APC/C
3M Crimplok+ Connector SC/APC
SM 250/900 μm and Easy Cleaver
3M Crimplok+ Connector SC/UPC
SM 250/900 μm and Easy Cleaver
3M Crimplok+ Connector SC MM
62.5 μm (OM1) 250/900 μm and
Easy Cleaver
80-6116-2233-5 120
80-6116-2234-3 120
120
120
60
2 sets
2 sets
1 set
1 unit
1 unit
1 unit
8700-AT/UPC/C
6700-AT/62.5/C-60
80-6116-2241-8
60
6700-AT/50/C-60
3M Crimplok+ Connector SC MM
50 μm (OM2) 250/900 μm and
Easy Cleaver
80-6116-2240-0 60
80-6116-2242-6 60
60
60
1 set
1 set
1 unit
1 unit
6700-AT/50LOMMF/C-60 3M Crimplok+ Connector SC MM
50 μm LOMMF (OM3/4) 50/900 μm
and Easy Cleaver
™
™
3M Fibrlok II Universal Optical Fiber Splice
2529/C_60 3M Fibrlok II Universal Optical Fiber
80-6114-9439-6 60
60
none
1 unit
Splice for 250/900 μm fiber with
Easy Cleaver
18
™
3M Hot Melt Connectors
™
3M Hot Melt Connectors come pre-loaded with advanced 3M hot
melt adhesive. There is no need for epoxy mixing and application
so the termination time averages just two minutes. The 3M hot
melt connector’s reliability, high performance and ease of use, in
both indoor and outdoor LANs worldwide, have made it an industry
favorite.
™
3M Hot Melt SC Connector
The 3M Hot Melt LC Connector in both singlemode and multimode
has all the advantages of our pre-loaded hot melt technology — and at
half the size of our SC connector.
™
3M Hot Melt LC Connector
Features and Benefits
™
3M Hot Melt LC, SC, ST and FC Connectors
Pre-loaded hot melt adhesive
Extended shelf life as compared to epoxy versions; fewer consumables (cost effective);
no epoxy to mix; no syringe needed; shorter set-up time; no mess; no waste
No waiting for epoxy to cure
Termination in approximately two minutes increases productivity; short heat and cool
cycle; saves time
Single-step polish for multimode
Extended adhesive shelf life
Pre-radiused PC ferrule
Only one abrasive to buy; faster polishing (cost effective)
Reduces outdated epoxy inventory and stock rotation requirements
Designed to provide contact of fibers; consistent performance
3M Hot Melt Connector Specifications
Multimode
Singlemode
SC
Connector Type
Product Family
ST
FC
SC
LC
ST
LC
6100
6200
6300
6600
8100YS
8300
8600
Insertion loss (dB)
0.2
0.2
0.2
0.2
0.2
0.2
0.2
Typical
Reflectance (dB)
<-25
<-25
<-25
<-25
<-40
<-40
<-40
Typical
Operating
temperature range
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
Storage temperature
Material
Connector ferrule
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Connector housing
and body
Engineered
resin
Engineered
resin
Engineered
resin
Engineered
resin
Engineered
resin
Engineered
resin
Engineered
resin
Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic
Boot
elastomer
elastomer
elastomer
elastomer
elastomer
elastomer
elastomer
Field termination kit
120 V
220 V
6366
6362
6366
6362
6366
6362
+
6366
6362
6366
6362
+
+ LC hot melt connectors require the 6650-LC expansion kit plus either the 6366 or 6362
19
3M Hot Melt Connector Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
6100-B
6100-R
6100-W
6200
MM Hot Melt ST ceramic, black boot
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
60 each
80-6111-2754-1
80-6111-2755-8
80-6111-2753-3
80-6111-2758-2
80-6111-2757-4
80-6113-1429-7
80-6113-1349-7
80-6113-1430-5
80-6113-1431-3
80-6113-1350-5
80-6113-1432-1
80-6113-1433-9
80-6113-1434-7
80-6113-1435-4
80-6111-2762-4
80-6111-7612-6
80-6111-2765-7
80-6113-1436-2
80-6113-1351-3
80-6113-1437-0
80-6113-1438-8
80-6113-1352-1
80-6113-1439-6
MM Hot Melt ST ceramic, red boot
MM Hot Melt ST ceramic, white boot
MM Hot Melt FC ceramic, white boot
6300-W
6600-S
6602-S
6603-S
6601-D
6602-D
6603-D
6604-D
6605-D
6606-D
8100-YS
8200-W
8300
MM Hot Melt SC ceramic, white boot
MM Hot Melt LC simplex 900 BTW white boot
MM Hot Melt LC simplex 1.6-2.0 cable white boot
MM Hot Melt LC simplex 2.4-3.0 cable white boot
MM Hot Melt LC duplex 900 buffer white/beige boots
MM Hot Melt LC duplex 1.6-2.0 cable white/beige boots
MM Hot Melt LC duplex 2.4-3.0 cable white/beige boots
MM Hot Melt LC duplex 900 buffer red/black boots
MM Hot Melt LC duplex 1.6-2.0 cable red/black boots
MM Hot Melt LC duplex 2.4-3.0 cable red/black boots
SM Hot Melt ST ceramic, yellow boot
SM Hot Melt FC ceramic, white boot
SM Hot Melt SC ceramic, white boot
8600-S
8602-S
8603-S
8601-D
8602-D
8603-D
SM Hot Melt LC simplex 900 BTW white boot
SM Hot Melt LC simplex 1.6-2.0 cable white boot
SM Hot Melt LC simplex 2.4-3.0 cable white boot
SM Hot Melt LC duplex 900 buffer white/beige boots
SM Hot Melt LC duplex 1.6-2.0 cable white/beige boots
SM Hot Melt LC duplex 2.4-3.0 cable white/beige boots
Note: MM – Multimode; SM – Singlemode
20
™
™
3M Crimplok Connectors
™
™
3M Crimplok Connectors need no adhesive, providing the speed
of non-adhesive connectors with the optical performance of
™
3M Hot Melt Connectors.
By using proven malleable metal element fiber-gripping technology,
these connectors are designed to be easily installed virtually anywhere
without the need for electrical power.
™
™
3M Crimplok ST Connector
Features and Benefits
™
™
3M Crimplok Connectors
Non-adhesive, non-splice design
No tool set-up required
Clean and simple terminations
Improved efficiency
No waiting for epoxy to cure
No power or electricity required
Termination in less than one minute with fully prepared fiber
Installation practically anywhere
3M Crimplok Connector Specifications
Multimode
Singlemode
ST
Connector Type
Product Number
SC
ST
SC
6900
6901
8900
8901
Connector
identification
Body color
Shell color
Boot color
Black
Beige
Black
Black
Beige
Beige
Black
Blue
Black
Black
Beige
Blue
Insertion loss (dB)
0.2
0.2
0.2
0.2
Typical
Reflectance (dB)
<-25
<-25
<-40
<-40
Typical
Operating
temperature range
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
-10° to 60°C
Storage temperature
-10° to 60°C
Material
Connector ferrule
Connector housing
Boot
Zirconia ceramic
Engineered resin
Zirconia ceramic
Thermoplastic polymer
Zirconia ceramic
Engineered resin
Zirconia ceramic
Thermoplastic polymer
Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer
Field termination kit
No power needed
6955 6955 6955 6955
3M Crimplok Connector Ordering Information
Product Number
Connector Type
Package
Minimum Order
60 each
3M ID
6900
MM Crimplok SC Connector ceramic
MM Crimplok ST Connector ceramic
SM Crimplok SC Connector ceramic
SM Crimplok ST Connector ceramic
60/carton
60/carton
60/carton
60/carton
80-6108-4525-9
80-6108-4523-4
80-6110-1257-8
80-6110-1259-4
6901
60 each
8900
60 each
8901
60 each
Note: MM - Multimode; SM - Singlemode
21
™
3M Epoxy Connectors
3M Epoxy Connectors feature a pre-radiused, zirconia ceramic PC
ferrule designed to provide contact of fibers for low reflection and low
insertion loss. The 3M epoxy SC and FC connectors are intermateable
within NTT specifications. These connectors are built to exacting
ferrule length tolerances for maximum machine polish yield and bulk
packaged to maximize factory cable assembly efficiency. 3M Epoxy
Connectors can also be used with an anaerobic adhesive for fast-cure
interconnect applications.
™
3M Epoxy SC Connector
Features and Benefits
™
3M Epoxy SC, ST and FC Connectors
Pre-radiused PC ferrule
Fiber centered in radius; improved performance; designed to provide contact of fibers;
low reflection; consistent performance; excellent transmission performance
Pull-proof (independent) ferrule
Designed to maintain optical contact (FC, SC)
High strength thermoplastic housing
Virtually eliminates flaking; resists corrosion (FC, SC)
™
3M Epoxy Connector Specifications
Multimode
Singlemode
Connector Type
Product Number
SC
FC
SC
FC
SC & FC/APC
8306 | 8206/APC
0.2
6306
0.2
6202
0.2
8306
0.2
8203
Insertion loss (dB)
0.2
Typical
Reflectance (dB)
<-25
<-25
<-40
<-40
<-65
Typical
Operating
temperature range
-10° to 60°C
-40° to 85°C
-10° to 60°C
-40° to 85°C
-40° to 75°C
-40° to 85°C
-40° to 75°C
-40° to 85°C
-40° to 75°C
-40° to 85°C
Storage
temperature
Material
Connector ferrule
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Zirconia
ceramic
Connector housing
and body
Engineered resin
Engineered resin
Engineered resin
Engineered resin
Engineered
resin
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Thermoplastic
elastomer
Boot
See “Termination Kits” section for 3M Epoxy Connector termination tools.
3M Epoxy Connector Ordering Information
Product Number
Connector Type
Package
Min. Order
3M ID
6306-B
MM Epoxy SC Connector ceramic, black boot
MM Epoxy SC Connector ceramic, beige boot
MM Epoxy FC/PC Connector ceramic
SM Epoxy SC Connector ceramic
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
1/bag, 60/carton
60 each
60 each
60 each
60 each
60 each
60 each
60 each
80-6109-9247-3
80-6107-6501-0
80-6107-6540-8
80-6107-6498-9
80-6111-6899-0
80-6107-6537-4
80-6111-6900-6
6306-BE
6202
8306
8306-SC/APC
8203
SM Epoxy SC/APC Connector ceramic
SM Epoxy FC/PC Connector ceramic
SM Epoxy FC/APC Connector ceramic
8206-FC/APC
Note: MM - Multimode; SM - Singlemode
22
3M Termination Kits
For simple, all-in-one field solutions, look no further than 3M Termination Kits. These kits provide the tools and
materials necessary to terminate 3M fiber optic connectors.
™
™
3M Crimplok + Connector Kits
™
™
3M Crimplok + Connector Kits 8765T-UPC/8765T-APC provide the tools needed to terminate 3M Crimplok+
Connectors 8700-UPC 6700 and 8700-APC series, respectively. Both kits contain the same fiber preparation
tools including a high quality cleaver, a work surface and a case with an integrated hook for easy hanging. Each
™
™
™
™
kit contains a specific 3M Crimplok + Activation Tool and 3M Crimplok + Nano Finishing Tool, depending
upon the connector type. UPC tools provide a square finish while APC tools provide a 8° angled finish.
™
™
™
™
3M Crimplok + SC/UPC Connector Kit 8765T-UPC
3M Crimplok + SC/APC Connector Kit 8765T-APC
™ ™
™
™
for 3M Cripmlok + Connectors 8700-UPC and 6700 Series
for 3M Crimplok + Connectors 8700-APC
™
™
3M Crimplok + Connector Kit Ordering Information
Product Number
Description
Packaging
3M ID
8765T-UPC
Crimplok+ SC/UPC Connector Kit
1 kit
1 kit
80-6116-2245-9
80-6116-2252-5
8765T-UPC/
250-900-JKT
Crimplok+ SC/UPC Field Termination Kit for 250/900um and Jacketed
connectors
8765T-APC
Crimplok+ SC/APC Connector Kit
1 kit
1 kit
80-6116-2214-5
80-6116-2251-7
8765T-APC/
250-900-JKT
Crimplok+ SC/APC Field Termination Kit for 250/900um and Jacketed
connectors
™
™
Replacement Parts for 3M Crimplok + Connector Kits
Product Number
Description
Packaging
3M ID
8765-AT/UPC
8765-AT/APC
8765-NF/UPC
8765-NF/APC
2534
Crimplok+ SC/UPC Activation Tool
Crimplok+ SC/APC Activation Tool
Crimplok+ SC/UPC Nano Finishing Tool
Crimplok+ SC/APC Nano Finishing Tool
Fiber cleaver (flat cleave)
1/package
1/package
1/package
1/package
1/package
1/package
1/package
80-6116-2199-8
80-6116-2190-7
80-6113-8075-1
80-6113-8096-7
80-6113-2377-7
80-6113-3936-9
80-6113-0462-9
6362-TH
Tri-hole fiber stripping tool
6365-KS
Aramid yarn fiber snips
05-00017
Lint free cloths
100 sheets/pk 80-6104-4324-6
1/package 80-6113-8754-1
8765-CS
Crimplok+ cleaning swabs (100 count)
23
™
3M No Polish Connector Kits
™
3M No Polish Connector Kits provide the tools
and materials needed to terminate singlemode
and multimode SC, LC and ST flat splice no polish
™
connectors. The 3M No Polish Connector Premium
Kit with Cleaver 8865-C/PR has the tools of the
regular 8865-C kit, but in a larger case with a work
surface, fiber shard container, tweezers, brush and
lint-free wipes in a tub.
™
The 3M Fiber Optic Angle Cleave Kit 2565
provides the tools necessary to terminate
™
3M No Polish LC/APC and SC/APC Angle
™
™
Splice Connectors. The 3M Fibrlok Angle
™
3M Fiber Optic Angle Cleave Kit 2565
Splice Assembly Tool 2501-AS is also included
™
™
to terminate 3M Fibrlok Angle Splices.
Replacement parts are available.
™
™
3M No Polish Connector Kit 8865-C
3M No Polish Connector Premium Kit with Cleaver 8865-C/PR
™
3M No Polish Connector Kit Ordering Information
Product Number
Description
Package
3M ID
8865-C
8865
No Polish Connector Kit with cleaver
1 kit
1 kit
1 kit
1 kit
1 kit
80-6113-2379-3
80-6113-2378-5
80-6113-8783-0
80-6114-8296-1
80-6113-2508-7
No Polish Connector Kit (no cleaver)
8865-C/PR
8865/PR
2565
No Polish Connector Premium Kit with cleaver
No Polish Connector Premium Kit (no cleaver)
Fiber optic angle cleaver kit with angle cleaver
™
Replacement Parts for 3M No Polish Connector Kit
Product Number
Description
Package
3M ID
2534
Fiber Optic Cleaver
1 each
80-6113-2377-7
80-6113-2423-9
80-6113-2797-6
80-6113-9519-7
80-6113-2630-9
80-6113-3936-9
80-6113-0462-9
80-6104-4324-6
2535
Fiber Optic Angle Cleaver
No Polish LC Connector Assembly Tool
No Polish ST Connector Assembly Tool
No Polish SC Connector Assembly Tool
Tri-hole fiber stripping tool
Aramid yarn fiber snips
1 each
8835-AT
8845-AT
8865-AT
6362-TH
6365-KS
05-00017
1 each
1 each
1 each
1 each
1 each
Lint free cloths
100 sheets/pk
24
™
3M Hot Melt Termination Kits
™
3M Hot Melt Termination Kits 6366 (120V oven) and 6362 (230V oven) contain the tools and materials
™
necessary to terminate 3M Hot Melt SC, ST, and FC Connectors, both singlemode and multimode. The
™
3M LC Hot Melt Expansion Kit 6650-LC is used in addition to the 6366/6362 hot melt termination kits
™
to terminate 3M Hot Melt LC Connectors.
™
™
3M Hot Melt Termination Kits 6366 and 6362-230V
3M Hot Melt LC Expansion Kit 6650-LC
Features and Benefits
™
3M Hot Melt Termination Kits
Microscope with oblique and coaxial lighting
Roll-up tool pouch
Better dual view of fiber end face inspection
Tools are organized and accessible
Universal hot melt holders
Instruction CD
Fewer parts to carry, holds cable more securely
Organized into video segments for quick reference
3M Hot Melt Termination Kit Ordering Information
Product Number
Description
Packaging
3M ID
6366
Hot Melt Termination Kit for ST, FC, SC Hot Melt Connectors, 120V
Hot Melt Termination Kit for ST, FC, SC Hot Melt Connectors, 230V
Hot Melt LC Expansion Kit
1 each
1 each
1 each
80-6113-2599-6
80-6113-2598-8
80-6113-1353-9
6362-230V
6650-LC
3M Hot Melt Accessories Ordering Information
Product Number
Description
Packaging
3M ID
6365-CC
Hot Melt Consumable Kit for ST, SC, FC
1 each
80-6113-0452-0
Lapping film, 2 µm (254X)
Lapping film, (263X) final polish
Lint free cloth tub
200 sheets
50 sheets
200 sheets
1 each
80-6104-4324-6
80-6110-0932-7
8892 Universal Polishing Jig
6191
Hot Melt Cooling Stand
1 each
80-6106-2569-3
80-6113-1472-7
6650-LS
LC Lapping Film Singlemode Consumable Kit (polishes 400 connectors)
1 each
Lapping film, 9 µm (461X)
20 sheets
100 sheets
40 sheets
80 sheets
Lapping film, 2 µm (254X)
Lapping film, 0.5 µm (661X)
Lapping film, final polish (863XW)
6650-LM
LC Lapping Film Multimode Consumable Kit (polishes 400 connectors)
1 each
80-6113-1473-5
Lapping film, 9 µm (461X)
Lapping film, 2 µm (254X)
20 sheets
100 sheets
25
™
3M Hot Melt Termination Kit 6366/6362 Kit Components
Replacement
Contents Qty. MOQ
Product Number Description
Package
3M ID
6312
120V 6-port oven with cooling plate (6366 Kit)
1
1
1
80-6111-6872-7
80-6111-6873-5
80-6113-1476-8
80-6113-0456-1
60-6500-2346-2
60-0200-0626-2
80-6110-0932-7
80-6104-4314-7
80-6113-0462-9
80-6113-3936-9
80-6113-0454-6
80-6113-0458-7
80-6113-0459-5
80-6113-2618-4
6323
230V 6-port oven with cooling plate (6362 Kit)
Universal connector holders, ST, SC, FC
Round polishing pad
1
1 each
1
6365-HH
6365-PP
6192-A
6
1 pkg
4/pkg
2
1 each
1
2 µm lapping film (pale green)
Final lapping film (frosted)
Polishing jig
200
1 each
500/pkg
863XW-DISC
8892
20
50
50/pkg
2
1
1
05-0002
6365-KS
6362-TH
6365-CT
6365-FS
6365-VS
6366-CW
Cable jacket stripper
1
1
1
Aramid fiber snips
1
1
1
Tri-hole fiber stripping tool
Crimp tool
1
1
1
1
1
1
Fiber scribe
1
1
1
View scope (200X)
1
1
1
Cleaning wipes with dispenser
100/pkg
12 pkgs
100/pkg
™
3M Hot Melt Oven 6312
26
™
™
3M Crimplok Termination Kit
The Crimplok Termination Kit and accessories provide the tools
™
™
and materials necessary to terminate 3M Crimplok Fiber Optic
Connectors. Replacement parts are available.
3M Crimplok Termination Kit Ordering Information
™
™
3M Crimplok Kit 6955
(components displayed)
Product Number
Description
Packaging
3M ID
6955
Crimplok termination kit
1 kit
80-6109-3664-5
3M Crimplok Accessories Ordering Information
Product Number
Product Description
Packaging
3M ID
6955-HSC
6955-HST
05-00251
Scoring head, Crimplok SC
Scoring head, Crimplok ST
Cleaning Wires, 12 pack
1 each
1 each
12/pkg
78-8073-7664-1
78-8073-7676-5
80-6104-4345-1
™
™
3M Crimplok Kit 6955
(components loaded in pouch)
3M Crimplok Termination Kit 6955 Kit Components
Replacement
MOQ
Product Number
SP-00503
SM
Product Description
Contents Qty.
Packaging
50 sheets
50 sheets
1 each
3M ID
Lapping film, Crimplok 2 µm (254x) 50
50
50
1
80-6108-4532-5
80-6110-1312-1
80-6109-3662-9
Lapping film, Crimplok SM (263x)
50
1
6955-T
Activation tool, Crimplok with ST
& SC scoring heads
6365-CT
6955-P
Universal crimp tool
Polishing tool, Crimplok
Universal polishing jig
Cable jacket stripper
Aramid fiber snips
1
1
1 each
80-6113-0454-6
80-6109-3727-0
80-6110-0932-7
80-6104-4314-7
80-6113-0462-9
80-6104-4324-6
80-6113-3936-9
1
1
1 each
8892
1
1
1 each
05-00002
6365-KS
05-00017
6362-TH
1
1
1 each
1
1
1 each
Lint free cloths
100/pkg
1
1 pkg
1
100 sheets/pk
1 each
Tri-hole fiber stripping tool
27
™
3M Epoxy Termination Tools
3M provides connectors with zirconia ceramic ferrules for use with two-part or anaerobic epoxy. These very
high quality connectors are ideal for use in factory assembly applications or in field-mount restorations where
a broad temperature range and stringent performance standards are required. The following 3M materials are
available to use with common termination tools available on the market.
It is important to use the proper syringe dispensing tip to assure proper placement of adhesives inside the
connector ferrule and avoid overflow.
™
3M Epoxy SC/APC and FC/APC Connectors require the angle polishing puck included in the APC
conversion kits.
™
3M Epoxy Termination Tools Ordering Information
Necessary and required for 3M connector design
Product Number
Description
Packaging
Min. Order
3M ID
05-00255
FO-25DT
6365-CT
8365-PP
261X-5S
Syringe, 3 cc
25
25
80-6104-4347-7
80-6107-7441-8
80-6113-0454-6
80-6113-0457-9
60-0700-0508-1
60-0700-0507-3
60-0700-0514-9
Dispensing tips (green)
1 pkg of 25
1 pkg of 25
Universal crimp tool
1
1
Soft polishing pad
1
1
FO Polish film 5 µm AL OC 4.5ꢀ5.5" SHT
FO Polish film 1 µm AL OC 4.5ꢀ5.5" SHT
500
500
500
500
25
262X-1S
661X-1.5S
FO Polish film 1.5 µm diamond 4.5ꢀ5.5" SHT 25
Recommended and available for cable preparation and connector finish
Product Number
8892
Description
Packaging
Min. Order
3M ID
Universal polishing jig
Carbide fiber scribe
Fiber snips
1
1
80-6110-0932-7
80-6113-0458-7
80-6113-0462-9
80-6113-3936-9
80-6113-0459-5
80-6113-2618-4
80-6104-4324-6
6365-FS
1
1
6365-KS
6362-TH
6365-VS
6366-CW
05-00017
1
1
Stripping tool
1
1
200x view scope
Cleaning wipes with dispenser
Lint free cloths 100-pack
1
1
12
1
12
1
28
™
™
3M Fibrlok Optical Splice System
™
™
A leader in mechanical splicing solutions, the 3M Fibrlok Optical Splice is now specified in fiber-to-the-
premises (FTTP) projects as a substitute for fusion splicing. Use it to splice single fibers without electrical power.
The system is designed to minimize the need for lengthy training, specialized skills or experience. Whether your
application is aerial, buried, underground or pedestal, outside plant or inside building, the Fibrlok splice system
can provide an ideal solution.
™
™
3M Fibrlok II Universal Optical Fiber Splice 2529
The 2529 optical fiber splice has successfully spliced combinations of 250
µm and 900 µm singlemode or multimode fibers for over 15 years. Utilizing
™
™
the rugged, low cost 3M Fibrlok Assembly Tool 2501, the 2529 splice
can be installed in most indoor or outdoor applications.
™
™
3M Fibrlok II Splice/Holder 2539
The 2539 splice/holder integrates the 3M Fibrlok II splice 2529, actuation
tool, and holder all in one package. It helps enable fast, on-site installation
™
™
without a separate assembly tool or splice tray. 3M VHB Tape on the
bottom of the splice/holder permanently holds it at the splice location.
™
™
3M Fibrlok 250 µm Fiber Splice 2540G
The 2540G splice helps enable fast, easy splicing of 250 µm singlemode and
multimode fiber for most splice installations, including fiber-to-the-premises.
The 2540G splice is the 3M Fibrlok II 2529, ideal for many 3M fiber closure
splice trays. Smaller splice allows higher splice density. Using the small,
™
™
rugged 3M Fibrlok Assembly Tool 2504G, it can be installed in almost any
environment, whether it is an aerial application or inside a building.
™
™
3M Fibrlok II Angle Fiber Splice 2529-AS
The 2529-AS splice was designed for the splicing of combinations of
250 µm and 900 µm fibers. The Fibrlok angle splices help enable fast,
on-site installation of fiber with <-60 dB optical reflection across
temperature extremes for excellent analog video transmission
performance.
™
™
3M Fibrlok 250 µm Angle Fiber Splice 2540-AS
The 2540-AS splice specifically splices 250 µm fiber with a smaller
form factor. The 2540-AS angle fiber splice helps enable fast, on-site
installation with <-60 dB optical reflection across temperature extremes
for excellent analog video transmission performance.
29
Features and Benefits
™
™
3M Fibrlok Splices
< 0.1 dB insertion loss
High performance
Minimum tooling requirements
No epoxy or electricity required
Simple, easy to use
Low capital cost
Easy on-site installation
Minimal training, lower installed cost
Keyed, angle cleave splice
Low reflectance, <-60dB across temperature
extremes
™
™
3M Fibrlok Angle Splice Assembly Tool
2501-AS
™
™
3M Fibrlok Splices Specifications
Product Number
Dimensions
2529
2539
2540G
3.8 mm x 6.4 mm x 38.1 mm
12.9 mm x 12.0 mm x 66.0 mm
4 mm x 4 mm x 36 mm
(0.15" x 0.25" x 1.50")
(0.51" x 0.47" x 2.60")
(0.16" x 0.16" x 1.42")
Fiber diameter
125 µm
125 µm
125 µm
250 µm
< 0.1
Coating diameter
250 or 900 µm
< 0.1
250 or 900 µm Tight Buffer
Insertion loss (dB)*
< 0.1
Typical
Reflectance (dB)*
<-55
<-55
<-55
Typical
Operating
temperature range*
-40°C to 75°C
-40°C to 75°C
-40°C to 75°C
-40°C to 75°C
-40°C to 75°C
-40°C to 75°C
Storage temperature
Material
Engineering thermoplastic
with aluminum alloy element
& index matching gel
Engineering thermoplastic with
aluminum alloy element, index
matching gel & VHB tape
Engineering thermoplastic
with aluminum alloy element
& index matching gel
™
™
*Specification for singlemode 3M Fibrlok Splice
™
™
3M Fibrlok Angle Splices Specifications
Product Number
Dimensions
2529-AS
2540G-AS
3.8 mm x 6.4 mm x 38.1 mm
4.0 mm x 4.0 mm x 40.00 mm
(0.15” x 0.25” x 1.50”)
(0.16 ꢀ 0.16 ꢀ 1.42 in”)
Fiber diameter
125 μm
125 μm
250 μm
< 0.1
Coating diameter
250 μm and 900 μm
Insertion loss (db)*
< 0.1
Typical
Reflectance (dB)*
<-65
<-65
Typical
Operating temperature range*
Storage temperature
Material
-40 ºC to 70 ºC
-40 ºC to 70 ºC
-40 ºC to 70 ºC
-40 ºC to 70 ºC
Engineering thermoplastic with aluminum
alloy element & index matching gel
Engineering thermoplastic with aluminum
alloy element & index matching gel
™
™
*Specification for singlemode 3M Fibrlok Splice
30
™
™
3M Fibrlok Splices Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
Splices
2529
Fibrlok II Universal Optical Fiber Splice for 6/pkg. 10 pkg/cs.
250 and 900 µm fiber
60 each
1 kit
80-6107-5589-6
80-6107-5830-4
80-6113-2005-4
JE-4200-9482-1
2529-K
2539
Fibrlok II 2529 Splices with Assembly Tool 1 kit/cs.
(60 splices, one 2501 assembly tool)
Fibrlok II Splice/Holder, integrated
actuation tool, and holder with tape
1/pkg. 60 pkg/cs.
5/pkg. 12 pkg/cs.
60 each
60 each
2540G
Fibrlok 250 µm Fiber Splice for
250 µm fiber
2529-AS
2540-AS
Fibrlok II Angle Fiber Splice
60/package
60/package
60 each
60 each
80-6113-2737-2
JE-4200-8435-0
Fibrlok 250 µm Angle Fiber Splice
Assembly Tools
2501
Required for Fibrlok II splice 2529
1/cs.
1 each
80-6105-8187-0
2504G
Required for Fibrlok splice 250 µm 2540G 1/cs.
1 each
1 each
JE-4200-8318-8
80-6113-2424-7
2501-AS
Required for Fibrlok splices 2529-AS
and 2540-AS
1/cs.
™
™
3M Fibrlok Splice Kits
The 3M Fibrlok Splice Kits for flat splices are available with (2559-C)
and without (2559) and contain all the materials needed to terminate
™
™
3M Fibrlok Splices whether it be a singlemode or multimode splice.
Detailed instructions are also provided. Included in the kits are the
™
™
™
™
3M Fibrlok II Assembly Tool 2501 and 3M Fibrlok 250 µm Assembly
™
Tool 2504G, simple-to-use tools designed for fast and easy installation.
3M Cleaver 2534
™
™
The 3M Fibrlok Splice Kit 2559-C contains:
• Fibrlok 2501 assembly tool for 3M Fibrlok II Splice 2529
• Fibrlok 2504G assembly tool for 3M Fibrlok 250 µm Splice 2540G
• 3M Fiber Cleaver 2534 (not included in 2559 kit)
• 3M Fiber Stripping Tool 6362-TH
• 3M Fiber Snips (scissors) 6365-KS
™
• Lint free cloths (100/pkg.)
3M Fiber Optic Angle Cleaver Kit
™
2565 includes 3M Fiber Optic Angle
Cleaver 2535, 3M Fibrlok Angle
Splice Assembly Tool 2501-AS and
all tools necessary for 3M Fibrlok
• Cleaning alcohol bottle
™
™
™
• Fibrlok II splice 2529 (6 each)
™
™
™
• Fibrlok 250 µm 2540G (5 each)
Angle Splices.
™
• Fibrlok II Splice/Holder 2539 (2 each)
The 3M Fiber Optic Angle Cleaver Kit 2565 provides the tools
to terminate the 3M Fibrlok Angle Splice 2529-AS and 2540-AS.
Also included in the kits are the 3M No Polish Connector Assembly
Tools 8865-AT and 8835-AT for terminating SC and LC angle splice
connectors. Replacement parts are available.
™
™
3M Fibrlok Splice Kit with Cleaver
2559-C
31
3M Fibrlok Splice Kits and Accessories Ordering Information
Product Number
Description
Packaging
Minimum Order
3M ID
Kits
2559-C
2559
2565
Fibrlok Splice Kit with fiber cleaver
1/cs.
1/cs.
1/cs.
1 each
1 each
1 each
80-6113-2376-9
80-6113-2375-1
80-6113-2508-7
Fibrlok Splice Kit without fiber cleaver
Fiber Optic Angle Cleave Kit with angle cleaver
Replacements for 3M Fibrlok Splice Kit
2501
Assembly tool required for Fibrlok II splice 2529
1/cs.
1 each
1 each
1 each
1 each
1 each
1 pkg.
1 each
1 each
80-6105-8187-0
JE-4200-8318-8
80-6113-2377-7
80-6113-3936-9
80-6113-0462-9
80-6104-4324-6
80-6113-2423-9
80-6113-2424-7
2504G
2534
Assembly tool required for Fibrlok 250 µm 2540G 1/cs.
Fiber cleaver
1/cs.
6362-TH
6365-KS
05-00017
2535
Tri-hole fiber stripping tool
Aramid yarn snips
1/cs.
1/cs.
Lint free cloths
100/pkg.
1/cs.
Fiber optic angle cleaver
Fibrlok Angle Splice assembly tool
2501-AS
1/cs.
™
3M Multi-Fiber Splice
Preparation Kits 2600
The Multi-Fiber Splice Preparation Kit 2600 provides the components
™
required to assemble the multi-fiber splice. The 3M Ribbon
Construction Tool 2670 provides organization and “ribbonizing” of
individual 250 µm coated fibers prior to splicing. The tooling
is designed to minimize the required tooling investment.
™
3M Multi-Fiber Splice Preparation Kit 2600
3M Multi-Fiber Splice Preparation Kit Ordering Information
Product Number
Description
Packaging
Min. Order
3M ID
2600
Multi-Fiber Optical Splice Prep Kit
Multi-fiber ribbon construction tool kit
Fiber optic ribbon construction tape
Lint free cloths
1/cs
1 each
1 each
1 pkg
80-6106-1765-8
80-6106-1788-0
80-6107-4395-9
80-6104-4324-6
2670
1/cs
2671
1000/pkg
100/pkg
05-00017
1 pkg
32
Grow with the
speed of fiber.
™
Give your network a leading edge with 3M Fiber Interconnect Solutions to help increase
speed, size and connectivity. Reach out to your sales representative to discuss a custom
suite of solutions to help your network succeed today and tomorrow.
Business Card
From the central office to your living room, 3M technology is helping make the world a
smaller, more connected place.
Learn more at 3M.com/Telecom.
33
We need these
pages added to print
correctly. Add content
if you have it.
34
35
3M, Fibrlok and Crimplok are trademarks of 3M Company.
Note: Product specifications and descriptions in this document are subject to change.
All products contained herein are RoHS compliant. “RoHS 2011/65/EU” means that the product or part does not contain any of the
substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in
homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information
provided by third party suppliers to 3M.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but
the accuracy or completeness is not guaranteed. This information is intended for use by persons with the knowledge and technical skills to
analyze, handle and use such information. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained
in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly
agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 12 months from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option,
to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable
for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal
theory asserted.
Communication Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000 USA
Phone 1-800-426-8688
Fax 1-800-626-0329
Web 3M.com/Telecom
Please recycle. Printed in USA
© 3M 2018. All rights reserved.
80-6113-8674-1
相关型号:
8308AGI
Low Skew Clock Driver, 8308 Series, 8 True Output(s), 0 Inverted Output(s), PDSO24, 4.40 X 7.80 MM, 0.925 MM HEIGHT, MO-153, TSSOP-24
IDT
©2020 ICPDF网 联系我们和版权申明