8208-U1K [3M]
SINGLE MODE, SIMPLEX FC CONNECTOR;
| 型号： | 8208-U1K |
| 厂家： | 
3M ELECTRONICS |
| 描述： | SINGLE MODE, SIMPLEX FC CONNECTOR 瞄准线 连接器 |
| 文件： | 总2页 (文件大小：81K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3
8308 SC and 8208 FC
Hot Melt Connectors
Ultra High Temp Single-mode
3M SC and FC Ultra High Temp Hot Melt
Connectors are the first connectors in the
industry to be truly field mountable and meet
Telcordia environmental specifications for
single-mode telephony.
Think of the headaches that you have with managing cable
assembly inventories and the logistics of ordering the correct
length. These problems can be solved by pulling the cable
first and then terminating the connector at the frame. 3M’s
Hot Melt connectors can now be used in telephony
applications to make central office and outside plant
installations neat and easy.
TM
3M Ultra High Temp Hot Melt Connectors
SC Connector
have been tested to 100°C (212°F) and can be
used in even the hottest outdoor
environments.
3M’s years of experience with preloaded adhesive in fiber
optic connectors has enabled the development of a connector
with all the advantages of Hot Melt, including the ability to
reheat and reposition the fiber in the termination process. This
is an easy-to-install field-mount connector with no additional
internal splice and the proven fiber retention of Hot Melt
connectors.
(short boot available)
Features
Benefits
Designed to meet Telcordia GR-326-CORE, Issue 3 single-mode
environmental specifications and exceeds TIA/EIA 568-B.3 standard
Meets or exceeds telephone and data industry
requirements for long-term reliability, except as noted below*
Ease of use on site
Quick termination in <2 minutes; High-yield
Allows custom length cable assemblies to be built on site
Enhances cable management in CO or network
Eliminates quality inspection for cable slack
Reduces cable assembly inventory
No pre-polished stub with internal splice
Proven adhesive for fiber retention
<0.2dB change at 100°C (212°F)
3M field-polishing process produces -55 dB reflection
Pre-loaded adhesive
Single fiber interface provides low loss
Not dependent on mechanical retention alone
Stable in outside plant environment
Reliable in high-speed transmission
No epoxy mess; no pot life
Re-heatable adhesive
Allows fiber repositioning; High-yield
Easier to see when polishing is complete
Red dot of adhesive
* SC connectors pass all of the mechanical tests in Telecordia GR-326, except transmission under applied tensile load at a 90° pull of 3.3 lbs.
or greater. This is consistent with other SC connectors that adhere to the NTT standard boot design. Transmission returns to the original
readings as soon as the load is released.
FC Connector
FC Connector
(short boot available)
Specifications
Product Number
8308 SC and 8208 FC
Operating and Storage Temperature
-40°C to 100°C (-40°F to 212°F)
<0.2 dB typical
Insertion Loss* (one mated pair)
Reflection*
<-55 dB typical
Mating Durability (500 matings)
<0.2 dB change
Proof Test
Straight Pull
<0.2 dB increase @ 15 lbs.
<0.2 dB increase @ 7.5 lbs.
Side Pull
Testing Specification
Telcordia GR-326-CORE, TIA/EIA 568.B
Materials and Identification
Ferrule
Zirconia Ceramic
Engineered Resin
Thermoplastic Elastomer
UL-94 V-0
Housing Body
Boot
Flame Retardancy
Adhesive
Red dot on ferrule
*Single-mode connectors tested at 1310 nm and 1550 nm
Ordering Information
Model Number
Description
MOQ
Packaging
8308-U
SC SM UHT Hot Melt Connector, blue boot
SC SM UHT Hot Melt Connector, Bulk, blue boot
FC SM UHT Hot Melt Connector, blue boot
FC SM UHT Hot Melt Connector, Bulk, blue boot
60 each
1/bag, 60/carton
1,000/carton
8308-U1K
8208-U
1,000 each
60 each
1/bag, 60/carton
1,000/carton
8208-U1K
Kits and Accessories
6355
1,000 each
Hot Melt Termination Kit for 3M ST, FC, SC Hot Melt Connectors, 120V
Hot Melt Termination Kit for 3M ST, FC, SC Hot Melt Connectors, 230V
UHT Hot Melt Upgrade Kit
1 each
1 each
1 each
1
Kit
6351
Kit
6355-U
Kit
05-00053
661X-0.5S
863X-0.02S
6850-A
Soft Polishing Pad
1/carton
0.5 µm Diamond Lapping Film
5 sheets
50 sheets
1 Kit
5 shts/pkg 100/carton
50 shts/carton
Kit
0.02 µm Lapping Film
Hot Melt Polishing Machine
Warranty; Limited Remedy; Limited Liability.
Important Notice
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to
be reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if
it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to
the product which are not contained in 3M’s current publications,
or any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
3
Patented U.S. and in foreign countries
3M is a trademark of 3M Company.
Telecom Enterprise Department
3M Telecommunications
6801 River Place Blvd.
Austin, TX 78726-9000
800-695-0447
Printed in USA.
Minimum 10%
Post-Consumer Fiber
FAX 800-626-0329
© 3M 2003 80-6111-3196-4
www.3MTelecommunications.com
相关型号：
8209-6060
CONNECTOR,D-SHELL,CABLE MNT,RECEPT,9 CONTACTS,PIN,0.109 PITCH,IDC TERMINAL,HOLE .112-.124
3M
©2020 ICPDF网 联系我们和版权申明