441549 [3M]

3M™ Accessories; 3MA ?? ¢配件
441549
型号: 441549
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

3M™ Accessories
3MA ?? ¢配件

文件: 总4页 (文件大小:1136K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MAccessories  
.100" x .100" Wiremount Socket  
Breakaway  
Tab  
A
See  
Note 3  
.5  
[ 13 ]  
3435  
Keying Plug  
3435-0  
Material: Gray Polyester (PBT)  
.24  
[ 6.1 ]  
3.00  
[ 76.2 ]  
.051  
[ 1.30 ]  
.032  
[ 0.81 ]  
.026  
See  
Note 1  
[ 0.66 ]  
RoHS* compliant  
Contact  
Quantity  
Dim B  
Dim C  
3490-X  
See  
Note 2  
10  
0.68 [ 17.3 ] 0.62 [ 15.7 ]  
0.88 [ 22.4 ] 0.82 [ 20.8 ]  
0.98 [ 24.9 ] 0.92 [ 23.4 ]  
1.18 [ 30.0 ] 1.12 [ 28.4 ]  
1.38 [ 35.1 ] 1.32 [ 33.5 ]  
1.48 [ 37.6 ] 1.42 [ 36.1 ]  
1.68 [ 42.7 ] 1.62 [ 41.1 ]  
1.88 [ 47.8 ] 1.82 [ 46.2 ]  
1.98 [ 50.3 ] 1.92 [ 48.8 ]  
2.18 [ 55.4 ] 2.12 [ 53.8 ]  
2.38 [ 60.5 ] 2.32 [ 58.9 ]  
2.68 [ 68.1 ] 2.62 [ 66.5 ]  
3.18 [ 80.8 ] 3.12 [ 79.2 ]  
14  
Standard Pull Tab  
3490  
16  
20  
24  
*"RoHS compliant" means that the product or part does not contain  
any of the following substances in excess of the following  
maximum concentration values in any homogeneous material,  
unless the substance is in an application that is exempt under  
RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent  
chromium, polybrominated biphenyls or polybrominated diphenyl  
ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise  
stated in writing by 3M, this information represents 3M's  
knowledge and belief based on information provided by third party  
suppliers to 3M.  
26  
30  
34  
36  
40  
44  
50  
3M Part Number  
3490-1  
Dimension A ꢀ02  
0.50 [ 12.7 ]  
1.00 [ 25.4 ]  
1.50 [ 38.1 ]  
2.00 [ 50.8 ]  
2.50 [ 63.5 ]  
3.10 [ 78.7 ]  
3.25 [ 82.6 ]  
60  
Recessed for  
Cable Exit  
3490-2  
.24  
[ 6.1 ]  
3490-3  
B
3490-4  
.22  
[ 5.6 ]  
3490-5  
.63  
[ 16.0 ]  
3490-7  
.15  
[ 3.8 ]  
3490-6  
3490-9  
“No Product Labeling”  
1.50 [ 38.1] width  
2.00 [ 50.8 ] length  
Plastic  
Material: Gray Polyester (PBT)  
3490-10  
0.26 [ 6.6 ]  
C
Notes:  
.08  
[ 2.0 ]  
See Note 1  
1. Matte finish for ink labeling.  
2. Material: Polyester  
Thickness: .005 .001  
Flammability: Oxygen index minimum 28, ASTM D-2863.  
3. Material: Double sided adhesive tape with liner.  
4. RoHS compliant*.  
.53 Ref  
[ 13.5 ]  
.10  
[ 2.5 ]  
Metal  
Material: Stainless  
Steel pasivated  
Inch  
[mm]  
Strain Relief  
3448-X0XX  
Tolerance Unless Noted  
.0 .0. .00.  
±.1 ±.01 ±..005  
XX= ‘‘Contact Quantity''  
Inch  
Type:  
of Socket:  
(i.e. 50 for  
50 Position  
Strain Relief)  
2 = Metal  
3 = Plastic  
[ ] Dimensions for Reference Only  
Note:  
TS-0-720-B  
1. The notch is non-existent on 40 position and larger.  
2. RoHS* compliant  
Sheet 1 of 1  
Date Modified: February 2, 2009  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
Regulatory Information Appendix  
3M Electronic Solutions Division/Interconnect  
EUROPE  
Appendix E1: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product is RoHS Compliant 2005/95/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E2: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/747/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E3: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as  
amended by Commission Decision 2005/618/EC.  
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E4: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by  
EU Court of Justice Decision 2008/C 116/04  
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished  
products subject to EU RoHS that are placed on the EU market after June 30, 2008.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.  
RIA-2217A-E  
Appendix E5: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under  
Item 6 of the Annex to the Directive.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
CHINA  
Appendix C1: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the  
product or part does not contain any of the following substances in excess of the following maximum concentration values in any  
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated  
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix C2: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain  
Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or  
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in  
writing, this information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
RIA-2217A-E  
Appendix C3: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or  
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in  
writing, this information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,  
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty  
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where  
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the  
legal theory asserted.  
3
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3m.com/interconnects  
Please recycle. Printed in USA.  
© 3M 2008. All rights reserved.  
RIA-2217A-E  
3M is a trademark of 3M Company.  

相关型号:

44157-0001

Rectangular Power Connector, 5 Contact(s), Male, Plug,
MOLEX

44167-0001

Rectangular Power Connector, 10 Contact(s), Female, Plug,
MOLEX

4416B

CMOS QUAD ANALOG SWIITCH
RANDE

4416H-R2R-503

R/2R Ladder Networks
BOURNS

4416J001

Interface IC
ETC

4416J002

Interface IC
ETC

4416J003

Interface IC
ETC

4416J004

Interface IC
ETC

4416M-R2R-503

R/2R Ladder Networks
BOURNS

4416P

Thick Film Surface Mounted Wide Body Tape and reel packaging standard
BOURNS

4416P-001-102

Array/Network Resistor, Isolated, Metal Glaze/thick Film, 1.6W, 50V, 2% +/-Tol, 100ppm/Cel, Surface Mount, 3041, CHIP
BOURNS

4416P-1

Thick Film Surface Mounted Wide Body Tape and reel packaging standard
BOURNS