3M [3M]
3M测试座 进口测试座 IC测试座 测试座厂家 测试座单价; 3M测试座进口测试座IC测试座测试座厂家测试座单价
| 型号： | 3M |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 3M测试座 进口测试座 IC测试座 测试座厂家 测试座单价 |
| 文件： | 总27页 (文件大小：1049K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
™
™
3M Textool Test and Burn-In Sockets
2005
1
3Innovation
™
™
3M Textool Test and Burn-In Sockets
2005
Table of Contents
BGA/LGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PGA/IPGA/SPGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DIP/Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ZIP Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Discrete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Plastic Properties Information . . . . . . . . . . . . . . . . . . . . . . . . 24
For the most current product and technical information, click on the product names within
this PDF, which will take you to the specific 3M Textool Test and Burn-In Sockets product
page on the website.
2
™
™
3M Textool Test and Burn-In Sockets
2005
• When mounting into a receptacle, it is recommended that the
contacts remain in the “OPEN” position during insertion.
• When fastening sockets to PC boards with screws and nuts, these
screws and nuts must be tightened prior to soldering, with the
contacts in the “OPEN” position.
• High lead count sockets may have a tendency to rise during soldering
operations. Care should be taken to prevent this from occurring.
• If hard wiring is to be used, wire no heavier than 30 gauge multi-
strand should be considered to prevent damage to the contacts.
• Care should be taken to reduce the potential for solder flux from
entering into the sockets during the soldering process.
First to market in 1992 with BGA sockets, 3M continues to
expand the product range and options available. The versatile
product design and six product platforms enable quick-turn
and low cost proliferation of new sizes. 3M provides reliable
performance for testing and burn-in applications with a design
that has been proven with years of customer experience. 3M
can provide a socket for most types of BGA or LGA packages,
standard or custom, in a variety of pitches. Reference the 3M
Textool BGA Socket brochure for more detailed information
on BGA sockets. Contact your local distributor or 3M sales
representative for information.
2. Polyethersulfone Plastic
Important Notes About 3M Textool Zero Insertion
Pressure (ZIP) Sockets
• Clean only with isopropyl alcohol or water and detergent.
3. Caution!
• Overheating of product may release vapors which may cause eye
and respiratory irritation. Skin contact with heated product may
cause burns.
1. Installation Instructions for Lever Actuated Zero
Insertion Force Sockets
• When mounting to the PC board, the socket must be soldered with
the contacts in the “OPEN” position.
4. Precautions
• Provide appropriate local exhaust ventilation when product is heated.
Avoid skin contact with hot material. Wear appropriate gloves to
prevent burns.
Typical Part Number Identification
• Consult Material Safety Data Sheet for further information on health
hazards, precautions and suggested first aid.
5. Product Information Source
2 256-1386-00-19 02
For Material Safety Data Sheet contact:
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
Numerical
Sequence
(800) 225-5373
Prefix
2 – Socket
Dash No.
00 thru 99 – Modifications
(Assigned by 3M)
Contact
No. Leads
Plastic Material
and Plating
Material
1
™
™
3M Textool BGA/LGA Open-Top Sockets,
0.65 mm
Open-Top Design
• Accommodates a wide range of package thicknesses
without requiring socket adaptations
• Allows excellent air flow around device
• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation
• Compatible with most robotic handlers
• Easy manual operation
Normally Closed Contact Design
• Dual beam contact delivers balanced, opposing forces
to solder ball with minimal shear stress
• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable
for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is
to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the
socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered
for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small
solder balls, 3M Technical Service may request package samples for fit analysis.
3M Textool BGA Open-Top Sockets, 0.65 mm
Maximum
Body Size (mm)
Maximum
Matrix
Maximum
Ball Count
Type
Status
I
II
III
12 x 12
17 x 17
21 x 21
17 x 17
25 x 25
31 x 31
289
625
961
Available
Available
Inquire*
Ordering Information
2 XXX-96 X X-XX-X X X 1
Material Type
1 = PES/BeCu/Au
Solder Tail Length
0 = 2.0 mm
Retainer
Pin Count
Product Series Number
4 = Without (standard)
5 = With
Product Platforms
1 = Type I
2 = Type II
Board Locating Post
0 = Without
1 = With (both alignment plate and base)
2 = With (alignment plate only)
3 = With (base only)
Product Variation
(Assigned by 3M)
Package Size /
Matrix Variation
(Assigned by 3M)
2
*Note: At time of publication, Type III was not released for sale. Please contact 3M Customer Service for current availability.
™
™
3M Textool BGA Open-Top Sockets, 0.80 mm
Open-Top Design
• Accommodates a wide range of package thicknesses
without requiring socket adaptations
• Allows excellent air flow around device
• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation
• Compatible with most robotic handlers
• Easy manual operation
Normally Closed Contact Design
• Dual beam contact delivers balanced, opposing forces to
solder ball with minimal shear stress
• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable
for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is
to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the
socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered
for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small
solder balls, 3M Technical Service may request package samples for fit analysis.
3M Textool BGA Open-Top Sockets, 0.80 mm
Maximum
Body Size (mm)
Maximum
Matrix
Maximum
Ball Count
Type
Status
I
II
III
IV
12 x 12
17 x 17
21 x 21
24 x 24
13 x 13
19 x 19
25 x 25
31 x 31
169
361
625
961
Available
Available
Available
Inquire*
Ordering Information
2 XXX-90 X X-XX-X X X 1
Material Type
1 = PES/BeCu/Au
Solder Tail Length
Pin Count
0 = 2.0 mm
1 - 1.0 mm
Product Series Number
Product Platforms
Retainer
1 = Type I
2 = Type II
3 = Type III
4 = Without (standard)
5 = With
Board Locating Post
0 = Without
Product Variation
(Assigned by 3M)
Package Size /
Matrix Variation
(Assigned by 3M)
1 = With (both alignment plate and base)
2 = With (alignment plate only)
3 = With (base only)
3
*Note: At time of publication, Type IV was not released for sale. Please contact 3M Customer Service for current availability.
™
™
3M Textool BGA Open-Top Sockets,1.0 mm
Open-Top Design
• Accommodates a wide range of package thicknesses
without requiring socket adaptations
• Allows excellent air flow around device
• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation
• Compatible with most robotic handlers
• Easy manual operation
Normally Closed Contact Design
• Dual beam contact delivers balanced, opposing forces to
solder ball with minimal shear stress
• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable
for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is
to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the
socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered
for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small
solder balls, 3M Technical Service may request package samples for fit analysis.
3M Textool BGA Open-Top Sockets, 1.0 mm
Maximum
Body Size (mm)
Maximum
Matrix
Maximum
Ball Count
Type
Status
0
I
II
III
19 x 19
29 x 29
40 x 40
17 x 17
27 x 27
39 x 39
45 x 45
289
729
1521
2025
Available
Available
Available
Available
47.5 x 47.5
Ordering Information
2 XXX-93 X X-XX-X X X X
Material Type
1 = PES/BeCu/Au
Pin Count
Product Series Number
Solder Tail Length
0 = 2.0 mm
Product Platforms
Retainer
0 = Type 0
1 = Type I
2 = Type II
3 = Type III
4 = Without (standard)
5 = With
Board Locating Post
0 = Without
Product Variation
(Assigned by 3M)
1 = With (both alignment plate and base)
2 = With (alignment plate only)
3 = With (base only)
Package Size / Matrix Variation
(Assigned by 3M)
4
™
™
3M Textool BGA Open-Top Sockets,1.27 mm
Open-Top Design
• Accommodates a wide range of package thicknesses
without requiring socket adaptations
• Allows excellent air flow around device
• Includes a retractable locating guide for easy board
mounting, even with hundreds of leads
Vertical Actuation
• Compatible with most robotic handlers
• Easy manual operation
Normally Closed Contact Design
• Dual beam contact delivers balanced, opposing forces to
solder ball with minimal shear stress
• Contact tips touch ball above its center plane producing only
slight indentations and negligible ball deformation
Retainer Clip Feature
3M Textool Sockets are designed to function properly without the use of retainer clips. The retainer clip feature is desirable
for high vibration/shock applications and with small or non-spherical solder balls. The purpose of the retainer clip feature is
to retain the DUT in the socket should there be an event or conditions leading to dislodgement of the solder balls from the
socket contacts. Retainer clips are custom-designed based on specific package dimensions and should only be considered
for stable production applications where package dimensions are not expected to vary. In cases of non-spherical and small
solder balls, 3M Technical Service may request package samples for fit analysis.
3M Textool BGA Open-Top Sockets, 1.27 mm
Maximum
Body Size (mm)
Maximum
Matrix
Maximum
Ball Count
Type
Status
II
III
35 x 35
45 x 45
27 x 27
35 x 35
729
1225
Available
Available
Ordering Information
2 XXX-92 X X-XX-X X X X
Material Type
1 = PES/BeCu/Au
Solder Tail Length
0 = 2.4 mm
Pin Count
Product Series Number
Product Platforms
Retainer
2 = Type II
3 = Type III
4 = Without (standard)
5 = With
Board Locating Post
0 = Without
Product Variation
(Assigned by 3M)
Package Size / Matrix Variation
(Assigned by 3M)
1 = With (both alignment plate and base)
2 = With (alignment plate only)
3 = With (base only)
5
™
™
3M Textool BGA/LGA Standard Lidded
Sockets,1.27 mm Type II
• Modular construction allows for cost effective socket
proliferation for standard and custom packages
• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls (BGA only)
• Flat contact head that provides for minimum solder ball
deformation
• Can be adapted to either BGA or LGA formats
• Available with inserts for mounting screws
(screws not included with socket)
3M Textool BGA/LGA Lidded Sockets, 1.27 mm
Maximum
Pins
Size
Maximum
Package
Thickness
Maximum
Package
Lid Style
Maximum
Lead Count
Type
Pitch
Matrix
TYPE II
TYPE II
TYPE III
TYPE III
1.27 mm
1.27 mm
1.27 mm
1.27 mm
27 x 27
27 x 27
39 x 39
39 x 39
729
729
1521
700
38 x 38 mm
38 x 38 mm
50 x 50 mm
50 x 50 mm
5.00 mm
3.50 mm
8.00 mm
4.00 mm
Standard
Low Force & Low Profile
Low Force
Low Force & Low Profile
Ordering Information
2 XXX X-1381-XX-X X 0 1
Material Type
1 = PES/BeCu/Au
Pin Count
Solder Tail Length
0 = .10 [ 2.5 ]
0 = .14 [ 3.5 ]
Matrix Pattern Variation
(Assigned by 3M)
Threaded Inserts
0 = Without
1 = With
Board Locating Post
0 = Without
1 = With
Product Variation
(Assigned by 3M)
6
™
™
3M Textool BGA/LGA Standard Lidded
Sockets,1.27 mm Type II
3M Textool BGA/LGA Standard Lidded Sockets, 1.27 mm Type II
Device
Pitch (mm)
Device
Length (mm)
Device
Width (mm)
Device
Matrix
Alignment
Method
Type
Accepted
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
19.00
20.95
20.95
21.00
23.00
23.00
23.00
24.70
25.00
27.00
27.00
27.00
29.00
29.00
30.00
31.00
31.00
31.00
32.00
32.33
32.33
33.00
33.00
33.71
35.00
35.00
35.00
35.00
19.00
24.07
24.70
21.00
23.00
23.00
23.00
24.70
25.00
27.00
27.00
27.00
29.00
29.00
30.00
31.00
31.00
31.00
32.00
32.33
32.33
33.00
33.00
33.71
35.00
35.00
35.00
35.00
12 x 12
14 x 17
16 x 19
16 x 16
15 x 15
17 x 17
18 x 18
19 x 19
19 x 19
19 x 19
20 x 20
21 x 21
21 x 21
22 x 22
23 x 23
22 x 22
23 x 23
24 x 24
24 x 24
25 x 25
25 x 25
25 x 25
26 x 26
24 x 24
24 x 24
25 x 25
26 x 26
27 x 27
BALL
BALL
BODY
BALL
BODY
BALL
BALL
BALL
BALL
BODY
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BODY
BALL
BODY
BALL
BALL
BALL
BODY
BALL
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL
BALL
BALL
7
™
™
3M Textool BGA/LGA Low Closing Force
Lidded Sockets,1.27 mm Type II
Low Profile Version
• Modular construction allows for cost effective socket
proliferation for standard and custom packages
• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls
• Flat contact head that provides for minimum solder ball
deformation
• Can be adapted to either BGA or LGA formats
• Built-in alignment plates
• Available with screw inserts (screws not included)
• Lid closing force reduction ratio of 13-to-1
• Accepts maximum pin count of 729 and maximum package
thickness of 3.50 mm
• Low profile lid reduces total socket height
• Recommended for sockets with lead counts of >300
Ordering Information
2 XXX X-1386-XX-X X 0 1
Material Type
1 = PES/BeCu/Au
Pin Count
Solder Tail Length
0 = 2.5 mm
0 = 3.6 mm
Threaded Inserts
Matrix Pattern Variation
(Assigned by 3M)
0 = Without
1 = With
Product Variation
(Assigned by 3M)
Board Locating Post
0 = Without
1 = With
3M Textool BGA/LGA Low Closing Force Lidded Sockets, 1.27 mm Type II
Device
Pitch (mm)
Device
Length (mm)
Device
Width (mm)
Device
Matrix
Next Alignment
Method
Device Type
Accepted
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
19.00
20.95
20.95
21.00
23.00
23.00
23.00
24.70
25.00
27.00
27.00
27.00
29.00
29.00
30.00
31.00
31.00
31.00
32.00
32.33
32.33
33.00
33.00
33.71
35.00
35.00
35.00
35.00
19.00
24.07
24.70
21.00
23.00
23.00
23.00
24.70
25.00
27.00
27.00
27.00
29.00
29.00
30.00
31.00
31.00
31.00
32.00
32.33
32.33
33.00
33.00
33.71
35.00
35.00
35.00
35.00
12 x 12
14 x 17
16 x 19
16 x 16
15 x 15
17 x 17
18 x 18
19 x 19
19 x 19
19 x 19
20 x 20
21 x 21
21 x 21
22 x 22
23 x 23
22 x 22
23 x 23
24 x 24
24 x 24
25 x 25
25 x 25
25 x 25
26 x 26
24 x 24
24 x 24
25 x 25
26 x 26
27 x 27
BALL
BALL
BODY
BALL
BODY
BALL
BALL
BALL
BALL
BODY
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BODY
BALL
BODY
BALL
BALL
BALL
BODY
BALL
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL
BALL
8
BALL
™
™
3M Textool BGA/LGA Low Closing Force
Lidded Sockets,1.27 mm Type III
Standard Profile Version
• Modular construction allows for cost effective socket
proliferation for standard and custom packages
• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls
• Flat contact head that provides for minimum solder ball
deformation
• Can be adapted to either BGA or LGA formats
• Built-in alignment plates
• Available with screw inserts as standard option
• Lid closing force reduction ratio of 50-to-1
• Accepts maximum pin count of 1521 and maximum device
thickness of 8.00 mm
Ordering Information
2 XXX X-1381-XX-X X 0 1
Material Type
1 = PES/BeCu/Au
Pin Count
Solder Tail Length
0 = .11 [ 2.5 ]
Matrix Pattern Variation
(Assigned by 3M)
Threaded Inserts
0 = Without
1 = With
Product Variation
(Assigned by 3M)
Board Locating Post
0 = Without
1 = With
3M Textool BGA/LGA Lidded Sockets, 1.27 mm Type III
Device
Pitch (mm)
Device
Length (mm)
Device
Width (mm)
Device
Matrix
Next Alignment
Method
Device Type
Accepted
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
37.50
37.50
40.00
40.00
40.00
41.00
42.00
42.50
42.50
42.50
43.00
45.00
45.00
45.00
47.50
47.50
47.50
50.00
37.50
37.50
40.00
40.00
40.00
41.00
42.00
42.50
42.50
42.50
43.00
45.00
45.00
45.00
47.50
47.50
47.50
50.00
27 x 27
29 x 29
29 x 29
30 x 30
31 x 31
31 x 31
32 x 32
31 x 31
32 x 32
33 x 33
33 x 33
33 x 33
34 x 34
35 x 35
35 x 35
36 x 36
37 x 37
39 x 39
BALL
BALL
BALL
BALL
BALL
BALL
BODY
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
9
™
™
3M Textool BGA/LGA Low Closing Force
Lidded Sockets,1.27 mm Type III
Low Profile Version
• Modular construction allows for cost effective socket
proliferation for standard and custom packages
• Coarse alignment on device body followed by a secondary
fine alignment to the solder balls (BGA only)
• Flat contact head that provides for minimum solder ball
deformation
• Can be adapted to either BGA or LGA formats
• Built-in alignment plates
• Available with screw inserts as standard option
• Lid closing force reduction ratio of 50-to-1
• Accepts maximum pin count of 700 and maximum
device thickness of 4.00 mm
Ordering Information
2 XXX X-1387-XX-X X 0 1
Material Type
1 = PES/BeCu/Au
Pin Count
Solder Tail Length
0 = 2.8 mm
Matrix Pattern Variation
(Assigned by 3M)
Threaded Inserts
1 = With
Product Variation
Board Locating Post
(Assigned by 3M)
0 = Without
1 = With
3M Textool BGA/LGA Low Profile Lidded Sockets, 1.27 mm Type III
Device
Pitch (mm)
Device
Length (mm)
Device
Width (mm)
Device
Matrix
Next Alignment
Method
Device Type
Accepted
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
37.50
37.50
40.00
40.00
40.00
41.00
42.00
42.50
42.50
42.50
43.00
45.00
45.00
45.00
47.50
47.50
47.50
50.00
37.50
37.50
40.00
40.00
40.00
41.00
42.00
42.50
42.50
42.50
43.00
45.00
45.00
45.00
47.50
47.50
47.50
50.00
27 x 27
29 x 29
29 x 29
30 x 30
31 x 31
31 x 31
32 x 32
31 x 31
32 x 32
33 x 33
33 x 33
33 x 33
34 x 34
35 x 35
35 x 35
36 x 36
37 x 37
39 x 39
BALL
BALL
BALL
BALL
BALL
BALL
BODY
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL or PAD (LGA)
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
BALL
10
™
™
3M Textool BGA/LGA Lidded Sockets,1.0 mm
The modular design of the 3M Textool BGA/LGA Lidded
Socket, 1.0 mm enables 3M to cost effectively provide a
socket that mates with almost any 1.0 mm pitch package.
The nest "Package Guide" can be adjusted to match the
specific body size and matrix of your particular package.
The socket contacts are inserted to match the ball count
and pattern of your package.
Ordering Information
2 XXX-91XX-XX-X X X X
Material Type
Pin Count
1 = PES/BeCu/Au
Solder Tail Length
0 = 2.8 mm
Product Series Number
9110 = Type I BGA w/ lid
Threaded Insert
0 = Without
1 = With
9114 = Type I BGA w/o lid
9115 = Type I LGA w/ lid
9119 = Type I LGA w/o lid
9120 = Type II BGA w/ lid
9124 = Type II BGA w/o lid
9125 = Type II LGA w/ lid
9129 = Type II LGA w/o lid
9130 = Type III BGA w/lid
9134 = Type III BGA w/o lid
9135 = Type III LGA w/ lid
9139 = Type III LGA w/o lid
Board Locating Post
0 = Without
1 = With (Alignment Plate Only) Standard
Product Variation
(Assigned by 3M)
3M Textool BGA/LGA Lidded Sockets, 1.0 mm
Socket
Type
Max. Package
Body Size
Max.
Matrix
Max.
Pin Count
Lid
Feature
Series Product Number
BGA
LGA
Status
I
23 x 23
23 x 23
21 x 21
21 x 21
441
441
with Lid
w/o Lid
9110
9114
9115
9119
Available
Available
II
40 x 40
40 x 40
39 x 39
39 x 39
1521
1521
with Lid
w/o Lid
9120
9124
9125
9129
Available
Available
III
47.5 x 47.5
47.5 x 47.5
45 x 45
45 x 45
2025
2025
with Lid
w/o Lid
9130
9134
9135
9139
Available
Available
11
™
™
3M Textool PGA Sockets
3M Textool PGA Sockets are well known for their durability
and reliability in test or burn-in of devices in PGA packages
or other packages with pin outs in a matrix format. They
are available in matrices from 10 x 10 through 25 x 25 on
.100" (2.54 mm) centers. 3M also offers three interstitial,
staggered, .100" (2.54 mm) centers (effective pitch 70.7
mil). One with 17 x 17 outer matrix and an inner matrix of
16 x 16, one with an outer matrix of 19 x 19 and an inner
matrix of 18 x 18 and the other with an outer matrix of 23 x
23 and an inner matrix of 22 x 22. In addition, we offer an
SPGA socket with 37 x 37 matrix with .050" (1.27 mm).
• Lever actuated zero insertion force mechanism
• Rugged 3-plate construction for durability and electrical
reliability
• Available with flush handle option for use with test probes
and ease of board stacking
• Available in 10 x 10 through 25 x 25 matrices
• Contacts, handles, top-plate and cam plate are replaceable
Note: Additional ten hole plugs can be ordered separately,
part #200-4660-14-1900
Ordering Information
2 XXX-63XX-XXX-1902
Number of Contacts
1902 PES with / 30 µ” Au/Ni
on BeCu
6310 – 10 x 10
6311 – 11 x 11
6313 – 13 x 13
6315 – 15 x 15
6317 – 17 x 17
6319 – 19 x 19
6321 – 21 x 21
6325 – 25 x 25
0UA = Molded Pattern,
Standard Handle
9UA = All holes open,
Standard Handle
12
™
™
3M Textool PGA Kit Sockets
• Available in 10 x 10 matrix through 25 x 25 matrix
• Used when only a few test sockets are needed
• Provides individual components ready for assembly
• Open pattern top plate; load only those contacts needed for
your specific device pin pattern
Part Number
Matrix Size
Description
200-6310-9UN-1900
200-6311-9UN-1900
200-6313-9UN-1900
200-6315-9UN-1900
200-6317-9UN-1900
200-6319-9UN-1900
200-6321-9UN-1900
200-6325-9UN-1900
10 x 10
11 x 11
13 x 13
15 x 15
17 x 17
19 x 19
21 x 21
25 x 25
Socket Kit w/o Contacts
300-6300-CNA-0002B
200-4660-14-1900
Each
Contact - BeCu/Au Plated
Extra Hole Plugs
Set of 10
™
™
3M Textool Interstitial PGA Sockets
Interstitial PGA Socket Outer Matrix 17 x 17
• 17 x 17 outer matrix with 16 x 16 inner staggered matrix
holds up to 432 leads
• Lever actuated zero insertion force mechanism
• Rugged 3-plate construction for durability and electrical
reliability
• Accommodates two lead diameter variations
.25 - .40 mm (.010" - .016") and
.35 - .51 mm (.014" - .020")
Ordering Information
2 XXX-1353-XX-3302
Number of Contacts
(432 maximum)
Lead Diameter Tail Variations:
00 = 0.25 mm - 0.40 mm – 3.3 mm tail
50 = 0.35 mm - 0.51 mm – 3.3 mm tail
60 = 0.35 mm - 0.51 mm – 7.0 mm tail
70 = 0.35 mm - 0.51 mm – 7.8 mm tail
80 = 0.35 mm - 0.51 mm – 3.5 mm tail
13
™
™
3M Textool Interstitial PGA Sockets
Interstitial PGA Socket Outer Matrix 19 x 19
• 19 X 19 outer matrix with 18 X 18 inner
staggered matrix holds up to 685 leads
• Lever actuated, zero insertion force mechanism
• Rugged, 3-plate construction for durability and
electrical reliability
• Accommodates two lead diameter variations
.25 - .40 mm (.010" - .016") inquire*
.35 - .51 mm (.014" - .020") available
*Note: Please contact 3M Customer Service for
availability.
Ordering Information
2 XXX-1358-XX-1902
Number of Contacts
(685 maximum)
Lead Diameter Variations:
00 = 0.10” - .016”
[0.25 mm - 0.40 mm] – 2.0 mm tail
50 = 0.14” - .020”
[0.25 mm - 0.51 mm] – 2.0 mm tail
70 = 0.14” - .020”
[0.25 mm - 0.51 mm] – 2.8 mm tail
80 = 0.14” - .020”
[0.35 mm - 0.51 mm] – 3.5 mm tail
Interstitial PGA Socket Outer Matrix 23 x 23
• 23 x 23 outer matrix with 22 x 22 inner staggered matrix
holds up to 792 leads
• Lever actuated zero insertion force mechanism
• Rugged 3-plate construction for durability and electrical
reliability
• Accommodates two lead diameter variations
.25 - .40 mm (.010" - .16")
.35 - .51 mm (.014" - .020")
Ordering Information
2 XXX-1357-XX-1902
Number of Contacts
(792 maximum)
Lead Diameter Variations:
00 = 0.10” - .016”
[0.25 mm - 0.40 mm] – 3.3 mm tail
50 = 0.14” - .020”
[0.35 mm - 0.51 mm] – 3.3 mm tail
14
™
™
3M Textool Shrink PGA Sockets
• Applicable package for 1.27 mm (.050") pitch PGA
• Zero insertion force
• Double mating contact
• Lever actuation mechanism
• Maximum grid 37 x 37 and lead count of 600
Ordering Information
2 XXX-1361-SX-3302
Number of Contacts
Solder Tail Length:
A = 2.8 mm
B = 4.3 mm
C = 6.0 mm
15
™
™
3M Textool DIP Sockets and Receptacles
The classic 3M Textool ZIP DIP Sockets have reliably served
the needs of semiconductor producers and users for over
twenty years. For test, burn-in or programming of devices
in dual-in-line packages, the lever actuated zero insertion
force mechanism allows easy insertion and withdrawal
without lead damage. Companion receptacles allow easy
socket replacement for high use applications such as DUT
boards and programming.
Use of receptacles can be a very cost-effective and practical
approach for high-use applications such as programming.
A worn-out or damaged socket can be simply unplugged
and replaced with a new one without the expense of
downtime or replacing the entire board.
DIP Sockets .100" (2.54 mm)
• For DIPs with .100" (2.54 mm) lead spacing
• Pin counts for 14-64 leads
• Lever actuated zero insertion force mechanism
• Socket contact point of .110" (2.79 mm) below top
surface of socket
Ordering Information
�ꢀꢁꢂꢃꢄ ꢅꢆꢇꢈꢄꢅꢉꢊꢋꢌꢃꢈꢅ
ꢛꢜꢝꢞꢟꢟꢟꢠꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢜꢢꢞꢟꢟꢝꢡꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢜꢥꢞꢟꢟꢝꢜꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢛꢡꢞꢟꢟꢝꢛꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢛꢛꢞꢟꢟꢝꢟꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢛꢝꢞꢜꢛꢨꢪꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢛꢝꢞꢪꢛꢝꢥꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢛꢥꢞꢜꢛꢨꢨꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢛꢥꢞꢝꢥꢜꢨꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢟꢛꢞꢜꢛꢥꢪꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢝꢡꢞꢜꢛꢥꢡꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢝꢡꢞꢟꢢꢟꢠꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢝꢛꢞꢜꢛꢥꢜꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢝꢥꢞꢜꢛꢥꢛꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢛꢢꢝꢞꢝꢝꢠꢟꢞꢡꢡꢞꢡꢢꢡꢛꢣ
ꢍꢀꢎꢄꢇꢁꢄꢅꢏꢊꢇꢎꢄꢐꢄꢑ
ꢒꢐꢓꢄꢇꢎꢁꢃꢅꢔꢃꢄꢕꢃꢃꢎꢅꢖꢀꢕꢓ
ꢦꢟꢡꢡꢅꢧꢅꢨꢦꢢꢛꢅꢩ
ꢗꢇꢄꢐꢎꢘꢅꢖꢃꢁꢃꢙꢄꢇꢁꢚꢃꢅꢆꢇꢈꢄꢅꢉꢊꢋꢌꢃꢈꢅ
ꢛꢜꢝꢞꢟꢟꢟꢠꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢜꢢꢞꢟꢟꢝꢡꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢜꢥꢞꢟꢟꢝꢜꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢛꢡꢞꢟꢟꢝꢛꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢛꢛꢞꢟꢟꢟꢝꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢫꢛꢛꢝꢞꢜꢛꢨꢪꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢛꢝꢞꢪꢛꢝꢥꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢫꢛꢛꢥꢞꢜꢛꢨꢨꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢛꢥꢞꢝꢥꢜꢨꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢫꢛꢟꢛꢞꢜꢛꢥꢪꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢝꢡꢞꢜꢛꢥꢡꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢝꢡꢞꢟꢢꢟꢠꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢫꢛꢝꢛꢞꢜꢛꢥꢜꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢫꢛꢝꢥꢞꢜꢛꢥꢛꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢛꢢꢝꢞꢝꢝꢠꢟꢞꢤꢤꢞꢡꢢꢡꢛꢣ
ꢜꢝ
ꢜꢢ
ꢜꢥ
ꢛꢡ
ꢛꢛ
ꢦꢝꢡꢡꢅꢧꢅꢜꢡꢦꢜꢢꢅꢩ
ꢦꢢꢡꢡꢅꢧꢅꢜꢪꢦꢛꢝꢅꢩ
ꢦꢟꢡꢡꢅꢧꢅꢨꢦꢢꢛꢅꢩ
ꢦꢢꢡꢡꢅꢧꢅꢜꢪꢦꢛꢝꢅꢩ
ꢦꢝꢡꢡꢅꢧꢅꢜꢡꢦꢜꢢꢅꢩ
ꢛꢝ
ꢛꢥ
ꢟꢛ
ꢦꢢꢡꢡꢅꢧꢅꢜꢪꢦꢛꢝꢅꢩ
ꢜꢦꢡꢡꢅꢧꢅꢛꢪꢦꢝꢅꢩ
ꢝꢡ
ꢝꢛ
ꢝꢥ
ꢢꢝ
ꢦꢢꢡꢡꢅꢧꢅꢜꢪꢦꢛꢝꢅꢩ
ꢦꢠꢡꢡꢅꢧꢅꢛꢛꢦꢥꢢꢅꢩ
�ꢀꢁꢂꢃꢄꢂꢅꢆꢃꢇꢈꢅꢉꢊꢁꢋꢂꢌꢍ
�ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢇꢄꢉꢊꢋꢌꢈꢄꢍꢎꢍꢏꢂꢍꢐꢂꢇꢄꢑꢏꢅꢆꢄꢒꢓꢔꢕꢄꢒꢖꢔꢕꢄꢒꢗꢔꢕꢄꢍꢁꢘꢄꢒꢙꢔꢄꢚꢇꢛꢇꢜꢅꢍꢛꢂꢇꢄꢝꢜꢅꢏꢝꢁꢈꢞꢄꢄ
ꢟꢂꢂꢄꢝꢅꢆꢇꢚꢈꢄꢝꢁꢂꢃꢄꢍꢎꢍꢏꢂꢍꢐꢂꢇꢄꢑꢏꢅꢆꢄꢒꢓꢔꢕꢄꢍꢁꢘꢄꢒꢖꢔꢄꢝꢜꢅꢏꢝꢁꢈꢞ
ꢄ
ꢬꢬ ꢠꢄꢓꢔꢄꢡꢝꢂꢘꢇꢚꢄꢢꢍꢏꢂꢄꢞꢖꢙꢄꢣꢄꢙꢞꢙꢄꢤꢄꢑꢊꢄꢥꢂꢍꢁꢦꢇꢈ
ꢄ
ꢠꢄꢖꢔꢄꢧꢏꢚꢇꢄꢧꢚꢍꢜꢄꢢꢍꢏꢂꢄꢞꢨꢗꢄꢣꢄꢖꢩꢞꢪꢄꢤꢄꢑꢊꢄꢥꢂꢍꢁꢦꢇꢈ
ꢠꢄꢗꢔꢄꢡꢝꢂꢘꢇꢚꢄꢢꢍꢏꢂꢄꢞꢖꢙꢄꢣꢄꢙꢞꢙꢄꢤꢄꢑꢊꢝꢫꢅꢄꢥꢂꢍꢁꢦꢇꢈ
ꢠꢄꢙꢔꢄꢧꢏꢚꢇꢄꢧꢚꢍꢜꢄꢢꢍꢏꢂꢄꢞꢨꢗꢄꢣꢄꢖꢩꢞꢪꢄꢤꢄꢑꢊꢝꢫꢅꢄꢥꢂꢍꢁꢦꢇꢈ
16
™
™
3M Textool DIP Sockets
Universal DIP Sockets .100" (2.54 mm)
• For DIPs with .100" (2.54 mm) lead spacing
• Extra-wide contact zone allows insertion of any DIP package
with distance between rows from .300" (7.62 mm) through
.600" (15.24 mm)
• Lever actuated zero insertion force mechanism
• Socket contact point of .090" (2.29 mm) below top surface
of socket
Socket
Part Number
Contact
Quantity
Mating Receptacle
Part Number
224-1286-00-0602J
224-1371-00-0602J
224-1287-00-0602J
224-1288-00-0602J
224-1289-00-0602J
24
28
32
40
42
224-1275-XX-0602J
224-1277-XX-0602J
224-1285-XX-0602J
224-1280-XX-0602J
224-1281-XX-0602J
Contact Tail Length/Mounting Flanges:
XX = 09 Solder Tail.13 [ 3.3 ] w/flanges
= 19 Wire Wrap Tail .62 [ 15.8 ] w/flanges
= 29 Solder Tail .13 [ 3.3 ] w/out flanges
= 39 Wire Wrap Tail .62 [ 15.8 ] w/out flanges
DIP Sockets .070" (1.78 mm)
• For DIPs with .070" (1.78 mm) lead spacing
• Pin counts from 28 through 90 leads
• Lever actuated zero insertion force mechanism
• Socket contact point of .090" (2.29 mm) below top
surface of socket
Socket
Part Number
Contact
Quantity
Mating Receptacle
Part Number
228-1290-00-0602J
232-1291-00-0602J
242-1293-00-0602J
256-1292-00-0602J
264-1300-00-0602J
290-1294-00-3302J
28
32
42
56
64
90
228-1290-XX-0602J
NOT AVAILABLE
242-1293-XX-0602J
NOT AVAILABLE
264-1300-XX-0602J
290-1294-XX-0602J
Contact Tail Length/Mounting Flanges:
XX = 09 Solder Tail w/flanges
= 29 Solder Tail w/flanges
17
™
™
3M Textool DIP Sockets
DIP Socket Receptacles
• Matching receptacle for most available ZIP DIP Socket,
including Universal DIP and Shrink DIP
• Mounting flanges hold receptacle to board
• Pre-tapped holes in receptacle body mate with screw-hole
in socket to hold socket firmly to receptacle (two screws
provided with each receptacle)
• Available in wire-wrap and solder-tail options, with and
without mounting flanges
Ordering Information
ꢅꢆꢇꢈꢁꢉꢆꢀꢁꢉ
�ꢀꢁꢂꢃꢄꢂ
ꢓꢒꢃꢁꢂꢆꢂꢔ
ꢊꢈꢄꢈꢋꢂꢃꢌꢍꢈꢎꢏꢃꢐꢂꢎꢑꢒꢇꢌꢈꢐꢉ
�ꢀꢁꢂꢃꢄꢂꢎꢕꢋꢃꢄꢆꢁꢖ
ꢅꢆꢉꢂꢃꢁꢄꢈꢎꢗꢈꢂꢘꢈꢈꢁꢎꢊꢀꢘꢉ
ꢙꢚꢛꢜꢝꢝꢝꢞꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢚꢡꢜꢝꢝꢛꢠꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢚꢣꢜꢝꢝꢛꢚꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢠꢜꢝꢝꢛꢙꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢙꢜꢝꢝꢛꢝꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢛꢜꢚꢙꢦꢨꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢛꢜꢨꢙꢛꢣꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢣꢜꢚꢙꢦꢦꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢣꢜꢛꢣꢚꢦꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢙꢣꢜꢚꢙꢞꢠꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢝꢙꢜꢚꢙꢣꢨꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢛꢠꢜꢝꢡꢝꢞꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢛꢠꢜꢚꢙꢣꢠꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢛꢙꢜꢚꢙꢞꢝꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢛꢙꢜꢚꢙꢣꢚꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢛꢣꢜꢚꢙꢣꢙꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢡꢛꢜꢚꢝꢠꢠꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢡꢛꢜꢛꢛꢞꢝꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢙꢞꢠꢜꢚꢙꢞꢛꢜꢟꢟꢜꢠꢡꢠꢙꢢ
ꢚꢛ
ꢚꢡ
ꢚꢣ
ꢙꢠ
ꢙꢙ
ꢝ
ꢝ
ꢝ
ꢝ
ꢝ
ꢚ
ꢝ
ꢚ
ꢝ
ꢙ
ꢤꢝꢠꢠꢎꢥꢎꢦꢤꢡꢙꢎꢧ
ꢤꢛꢠꢠꢎꢥꢎꢚꢠꢤꢚꢡꢎꢧ
ꢤꢡꢠꢠꢎꢥꢎꢚꢨꢤꢙꢛꢎꢧ
ꢤꢝꢠꢠꢎꢥꢎꢦꢤꢡꢙꢎꢧ
ꢤꢡꢠꢠꢎꢥꢎꢚꢨꢤꢙꢛꢎꢧ
ꢤꢚꢠꢠꢎꢥꢎꢙꢤꢨꢛꢎꢎꢧ
ꢙꢛ
ꢙꢣ
ꢝꢙ
ꢤꢛꢠꢠꢎꢥꢎꢚꢠꢤꢚꢡꢎꢧ
ꢤꢠꢦꢠꢎꢥꢎꢚꢤꢦꢣꢎꢧ
ꢤꢡꢠꢠꢎꢥꢎꢚꢨꢤꢙꢛꢎꢧ
ꢚꢤꢠꢠꢠꢎꢥꢎꢙꢨꢤꢛꢠꢎꢧ
ꢚ
ꢝ
ꢚ
ꢙ
ꢤꢚꢠꢠꢎꢎꢥꢎꢙꢤꢨꢛꢎꢎꢧ
ꢛꢠ
ꢤꢠꢦꢠꢎꢥꢎꢚꢤꢦꢣꢎꢧ
ꢤꢚꢠꢠꢎꢥꢎꢙꢤꢨꢛꢎꢧ
ꢛꢙ
ꢛꢣ
ꢤꢡꢠꢠꢎꢥꢎꢚꢨꢤꢙꢛꢎꢧ
ꢚ
ꢚ
ꢙ
ꢝ
ꢤꢠꢦꢠꢎꢥꢎꢚꢤꢦꢣꢎꢧ
ꢤꢚꢠꢠꢎꢥꢎꢙꢤꢨꢛꢎꢧ
ꢤꢠꢦꢠꢎꢥꢎꢚꢤꢦꢣꢎꢧ
ꢤꢣꢠꢠꢎꢥꢎꢙꢠꢤꢝꢙꢎꢧ
ꢤꢞꢠꢠꢎꢥꢎꢙꢙꢤꢣꢡꢎꢧ
ꢡꢛ
ꢞꢠ
ꢙ
�ꢀꢁꢂꢃꢄꢂꢎꢩꢃꢆꢍꢎꢪꢈꢁꢖꢂꢫꢬꢭꢍꢃꢁꢖꢈꢉꢮ
ꢟꢟꢎꢎ ꢯꢎꢠꢞꢰꢎꢤꢚꢝꢎꢥꢎꢝꢤꢝꢎꢧꢎꢕꢀꢍꢱꢈꢐꢎꢩꢃꢆꢍꢎꢘꢬꢎꢲꢍꢃꢁꢖꢈꢉ
ꢚꢎ ꢴꢵꢃꢆꢍꢃꢌꢍꢈꢎꢘꢆꢂꢫꢎꢜꢠꢞꢰꢎꢜꢚꢞꢰꢎꢜꢙꢞꢎꢃꢁꢱꢎꢜꢝꢞꢎꢀꢋꢂꢆꢀꢁꢉ
ꢎ
ꢎ
ꢎ
ꢯꢎꢚꢞꢰꢎꢤꢡꢙꢎꢥꢎꢚꢨꢤꢣꢎꢧꢎꢳꢆꢐꢈꢎꢳꢐꢃꢋꢎꢘꢬꢎꢲꢍꢃꢁꢖꢈꢉ
ꢯꢎꢙꢞꢰꢎꢤꢚꢝꢎꢥꢎꢝꢤꢝꢎꢧꢎꢕꢀꢍꢱꢈꢐꢎꢩꢃꢆꢍꢎꢘꢬꢀꢒꢂꢎꢲꢍꢃꢁꢖꢈꢉ
ꢯꢎꢝꢞꢰꢎꢤꢡꢙꢎꢥꢎꢚꢨꢤꢣꢎꢧꢎꢳꢆꢐꢈꢎꢳꢐꢃꢋꢎꢘꢬꢀꢒꢂꢎꢲꢍꢃꢁꢖꢈꢉ
ꢙꢎ ꢶꢁꢍꢔꢎꢃꢵꢃꢆꢍꢃꢌꢍꢈꢎꢘꢆꢂꢫꢎꢂꢫꢈꢎꢜꢠꢞꢎꢷꢎꢜꢙꢞꢎꢀꢋꢂꢆꢀꢁꢎꢲꢀꢐꢎꢂꢫꢈꢎꢤꢠꢦꢠꢸꢎꢥꢎꢚꢤꢦꢣꢎꢇꢇꢎꢧꢎꢉꢋꢃꢄꢆꢁꢖ
ꢝꢎ ꢶꢁꢍꢔꢎꢃꢵꢃꢆꢍꢃꢌꢍꢈꢎꢘꢆꢂꢫꢎꢜꢠꢞꢎꢃꢁꢱꢎꢜꢚꢞꢎꢀꢋꢂꢆꢀꢁꢉ
18
™
™
3M Textool ZIP Strip/Flat Pack Sockets
3M Textool ZIP Strip/Flat Pack Sockets are a very versatile
family of sockets available in a variety of formats. Used
singly, they mate with single-in-line or staggered-in-line
packages. Used in pairs, they will interconnect a variety
of non-standard package formats with leads extending
from two sides of the package, in axial or radial lead
configurations, or in-line or staggered pin outs. The lever
actuated zero insertion force mechanism allows easy
insertion and withdrawal without lead damage.
In-Line ZIP Strip 100" (2.54 mm)
• For single-in-line packages on .100" (2.54 mm) centers
• Can be used in sets of two or more to create a socket for
non-standard leaded packages on .100" (2.54 mm) centers
• ZIP Strip pin counts from 10 through 36 leads
• Lever actuated zero insertion force mechanism
• Ganging bar included to enable mass actuation
• Accepts pins up to .025" (0.6 mm) square
• Socket contact point of .085" (2.2 mm) below top
surface of socket
Socket
Part Number
Contact
Quantity
210-2599-00-0602
220-2600-00-0602
224-5809-00-0602
232-2601-00-0602
236-6225-00-0602
10
20
24
32
36
19
™
™
3M Textool ZIP Strip Sockets
Staggered ZIP Strip Sockets, .050" (1.27 mm) x
.100" (2.54 mm)
• For devices with .050" (1.27 mm) lead centers formed
in staggered rows with .100" (2.54 mm) between
centers and rows
• Socket with top-plate cover requires vertical insertion of
leads
• Frequently used in pairs to handle devices with standard
leads on opposite sides of the package
• Order left- and right-hand strips separately to obtain a
complete pair
• Lever actuated zero insertion force mechanism
Ordering Information
Socket
Part Number
Contact
Quantity
232-1270-01-0602J
232-1270-02-0602J
32
32
Contact Pattern: See Tech Sheet
20
™
™
3M Textool ZIP Strip Sockets
Axial Lead ZIP Strip/Flat Pack Sockets,
.050" (1.27 mm) x .100" (2.54 mm)
• For devices with .050" (1.27 mm) lead centers unformed or
extending axially from package
• Socket without top-plate cover enables horizontal insertion
of leads
• Frequently used in pairs to handle any non-standard flat
pack with leads on .050" (1.27 mm) centers
• Order left- and right-hand versions separately to obtain a
complete pair
• Lever actuated zero insertion force mechanism
• Accepts pins up .014" (0.36 mm) to .025" (0.64 mm)
square
Ordering Information
Socket
Part Number
Contact
Quantity
234-3034-01-0602
234-3034-02-0602
235-3019-01-0602
235-3019-02-0602
251-5949-01-0602
251-5949-02-0602
34
34
35
35
51
51
Contact Pattern: See Tech Sheet
Staggered ZIP Strip Sockets
• For devices with .050" (1.27 mm) lead centers formed
in staggered rows with .100" (2.54 mm) between centers
(in same rows) and .075" (1.90 mm) between rows
• Frequently used in pairs to handle devices with staggered
leads on opposite sides of the package
• Order left- and right-hand strips to obtain a complete pair
• Lever actuated zero insertion force mechanism
Ordering Information
Socket
Part Number
Contact
Quantity
239-5605-01-0602
239-5605-02-0602
255-7322-01-0602
255-7322-02-0602
39
39
55
55
21
Contact Pattern: See Tech Sheet
™
™
3M Textool SOIC Sockets
A user friendly, compact size 3M Textool Lidded Socket is
available for SOIC gull wing packages on 50 mil centers.
• Lid can be actuated from top or front and is compatible with
automated load/unload equipment
• Compact envelope and side-to-side stackability maximize
board density
• Tweezer slot for easy manual loading/unloading
• Lid applies 80 grams normal force per lead for maximum
electrical reliability
• Accepts Gull Wing JEDEC device sizes in .150" (3.81 mm)
and .300" (7.62 mm) body widths
Ordering Information
Part Number
Leads
8
SOIC Body Width
.150 [ 3.81 ]
.150 [ 3.81 ]
.150 [ 3.81 ]
.300 [ 7.62 ]
.300 [ 7.62 ]
.300 [ 7.62 ]
.300 [ 7.62 ]
.300 [ 7.62 ]
.330 [ 8.38 ]
208-7391-55-1902
214-7390-55-1902
216-7383-55-1902
216-7224-55-1902
218-7223-55-1902
220-7201-55-1902
224-7397-55-1902
228-7396-55-1902
228-7474-55-1902
14
16
16
18
20
24
28
28
22
™
™
3M Textool Discrete Sockets
Laser Diode Sockets
• Compact miniature socket size for maximum board density
• Accommodates most TO package formats with pin circle
options of .079" (2.0 mm) or .100" (2.54 mm), including
popular laser diode devices with .018” (0.46 mm) diameter
leads
• Three and four lead options available
• Funneled entry holes to assist lead insertion
Part Number
Contact Qty.
Pin Circle
Mounting Flange
203-6585-00-0602J
203-6585-50-0602J
203-6970-00-0602J
203-6970-50-0602J
204-6585-00-0602J
204-6585-50-0602J
204-6585-00-0602J
204-6970-50-0602J
3
3
3
3
4
4
4
4
.100 [ 2.54 ]
.100 [ 2.54 ]
.079 [ 2.0 ]
.079 [ 2.0 ]
.100 [ 2.54 ]
.100 [ 2.54 ]
.079 [ 2.0 ]
.079 [ 2.0 ]
Yes
No
Yes
No
Yes
No
Yes
No
Power In-Line Sockets
• Accepts a wide variety of in-line devices up to three leads
including TO-220 with lead cross sections that fit within a
diameter range of .020”-.045” (0.51-1.14 mm)
• Kelvin contacts
• Body and contacts are repairable
• Two slotted-out entry ports accept devices with .075"
(1.90 mm) to .200" (5.1 mm) between leads
• Must be mounted to board with screws
• Temperature rating 125°C
Ordering Information
203-2737-55-1102
23
™
™
3M Textool Typical Plastic Properties
PLASTIC MATERIAL
(TEXTOOL PART I.D.)
Physical
POLYETHER-
SULFONE
(-019)
POLYPHENYLENE-
SULFIDE
*POLYSULFONE
(-006)
POLYETHERIMIDE
(-033)
Units
—
(-011)
Specific Gravity
1.45
0.20
1.60
.34
1.65
1.51
.18
Water Absorption 24 Hours 73°F
Operating Temperature
%
.01
°C
Consult the specific Product Data Sheet
*Clean polysulfone material only with methyl alcohol or water and detergent.
MECHANICAL
Tensile Strength
Elongation
PSI
%
18,000
3.0
18,000
23,000
3-4
24,500
3
1-3
Flexural Strength
Flexural Modulus
Compressive Strength
Izod Impact Notched
Rockwell Hardness
PSI
24,000
1,200,000
24,000
1.8
27,000
32,000
37,000
1,230,000
23,500
1.7
PSI
1,220,000
1,800,000
24,700
1.5
PSI
—
1.4
—
FT-LBS/IN
—
M-92
R-123
M-125
ELECTRICAL
Dielectric Strength S/T
Dielectric Constant 106 Hz
Dissipation Factor 106 Hz
Arc Resistance
VOLTS/MIL
—
480
440
4.17
375
3.80
0.0013
50
630
3.5
560
—
3.49
0.0049
115
—
0.0094
121
.0015
85
—
SECS
—
Volume Resistivity
OHMS-CM
1017
1015 - 1016
1016
3 x 1016
1017
THERMAL
Heat Deflection Temp 264 PSI
Thermal Conductivity
Coeff. of Linear Exp.
Flammability
°F
BTU-IN HR. FT. 2F
IN/IN/F
365
2.2
420
1.1
505
3.1
410
1.5
530
—
1.4 x 10-5
94V-0
—
1.5 x 10-5
94V-0
1.1 x 10-5
94V-0
1.7 x 10-5
94V-0
—
94V-0
24
For technical, sales or ordering information,
contact your local 3M distributor or
3M Customer Service at:
Phone 1-800-225-5373
Fax
1-800-932-9373
3M and Textool are trademarks of 3M.
Warranty; Limited Remedy; Limited Liability.
Important Notice
This product will be free from defects in material and manufacture
for a period of one year from the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within
the warranty period stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M product,
regardless of the legal theory asserted.
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
3
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/electronics
1-800-225-5373
© 3M 2005
1-800-932-9373 (fax)
相关型号：
©2020 ICPDF网 联系我们和版权申明