3432-66K2 [3M]
Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Gray Insulator, Receptacle;型号: | 3432-66K2 |
厂家: | 3M ELECTRONICS |
描述: | Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Gray Insulator, Receptacle |
文件: | 总4页 (文件大小:1165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
• Military (with 3M’s 3518 & N3518 polarizing key) and
centerbump polarization
• Optional ejector latches
• Mounting holes for securing header to board
• Optional polarizing posts available
• High temperature insulator option suitable for “no lead”
soldering operations
• High temperature option suitable for reflow soldering
using “paste in hole” techniques
• Solder tail option
• See the Regulatory InformationAppendix (RIA) in the
“RoHS compliance” section of www.3Mconnector.com
for compliance information
Date Modified: April 4, 2011
TS-0772-M
Sheet 1 of 4
Physical
Insulator:
Material: Glass Filled Polyester (PBT)
Glass Filled Polyester (PCT) - (High Temp Option)
Flammability: UL 94V-0
Color: Gray (PBT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
100 µ” [2.54 µm] Nickel - Overall
WipingArea: 30 µ” [ 0.76 μm ] Gold
Solder Tails: Tin Lead or Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
5.00A, 1 Contact Powered
3.00A, 6 Contacts Powered
1.75A, All Contacts Powered
Current Rating:
Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise,
20% derated. Reference appropriate 3M Product Specification for detailed current
derating curves.
Insulation Resistance: >1 × 109 Ω at 500 VDC
1,000 VRMS at Sea Level
Withstanding Voltage:
Environmental
-55°C to +105°C
Temperature Rating:
High Temp PCT insulator version: 260°C, per J-STD-020C, single pass
PBT insulator version: 191°C, maximum insulator temperature, solder wave
process only
Process Rating:
1 (per J-STD-020C) High Temp. (PCT) versions only
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
-X0XX
-X3XX
-X2XX
Header without Latch Ejector
Header with
Header with
Long Ejector/Latch
for 3M Sockets with
Strain Relief
Short Ejector/Latch
for 3M Sockets without
Strain Relief
.08
[2.0]
.08
[2.0]
.573 .010
[ 14.55 ]
.424 .010
[ 10.77 ]
1.07 Ref
[27.2]
.97 Ref
[24.6]
A
.025 .002 Sq Typ
[ 0.64 ]
.37 Ref
[9.4]
.46 Ref
[11.7]
D
.24
[6.1]
.28
7.1
.100
2.54
REF.
.020
0.51
.30
[7.6]
.34
8.6
.25
6.4
.13
3.3
.100
2.54
REF.
2X O .100 [2.54]
Dim. E
C
L
SEE NOTE #2
POSITION #1
B
“Y”
F Typ
Section A-A
(Straight)
Notch A
(See Table 1 & Note1)
Position 1
Orientation
Triangle
Notch B
(See Table 1)
.025 .002 Sq Typ
[ 0.64 ]
Notch C
(See Table 1 & Note 1)
.16
[4.1]
.21
[5.3]
A
B
.24
[6.1]
F Typ
.68
[17.3]
.12
[3.0]
.35
[8.9]
.30
[7.6]
C
“Y”
L
.020
[0.51]
.197
[5.00]
Dim. E
B
A
.049 Ref
[1.24]
.20
[5.1]
C
A
2X ø .100
[2.54]
(See Note 2)
.100 Ref
[2.54]
Section B-B
(Right Angle)
TS-0772-M
Sheet 2 of 4
C
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnector.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Table 1
Dimensions
B
Inch
3M Part
Number
Polarizing
Notches
(mm)
Pin Qty
A
C
D
Tolerance Unless Noted
06
08
10
14
16
20
24
26
30
34
40
50
60
64
3869
3889
3793
3314
3408
3428
3627
3429
3440
3431
3432
3433
3372
3764
1.065 (27.05)
1.165 (29.59)
1.265 (32.13)
1.465 (37.21)
1.565 (39.75)
1.765 (44.83)
1.965 (49.91)
2.065 (52.45)
2.265 (57.53)
2.465 (62.61)
2.765 (70.23)
3.265 (82.93)
3.765 (95.63)
3.965 (100.71)
0.905 (22.99)
1.005 (25.53)
1.105 (28.04)
1.305 (33.12)
1.405 (35.66)
1.605 (40.74)
1.805 (45.82)
1.905 (48.36)
2.105 (53.44)
2.305 (58.52)
2.605 (66.14)
3.105 (78.84)
3.605 (91.54)
3.805 (96.62)
0.665 (16.89)
0.765 (19.43)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.565 (39.75)
1.665 (42.29)
1.865 (47.37)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.505 (12.83)
0.605 (15.37)
0.705 (17.91)
0.905 (22.99)
1.005 (25.53)
1.205 (30.61)
1.405 (35.69)
1.505 (38.23)
1.705 (43.31)
1.905 (48.39)
2.205 (56.01)
2.705 (68.71)
3.205 (81.41)
3.405 (86.49)
B*
.00
.01
.000
.005
.0
.1
B*
Inch
BC
[ ] Dimensions for
Reference only
BC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
* Available without center notch B. Contact 3M.
Table 2
3M Part
Number Suffix
Contact Tail
Dim E
Pin Cross Section
Dim G
-5XX2
Solder Tail for
.062 (1.57)
Thick PC Board
Dim F
.0245 .0005
(0.622)
Diagonals
.028 .001
(0.71)
Corner Radii
.0075 Ref
(0.191)
.112 .010
(2.84)
0.035 .003
(0.89) (See Note 3)
-6XX2
-5X03
Solder Tail for 0.94
(2.39) to .125 (3.18)
Thick PC Board
.155 .010
(3.94)
.0245 .0005
(0.622)
.028 .001
(0.71)
.0075 Ref
(0.191)
0.035 .003 (0.89)
-6X03
or ø.116
[2.95]
ø.106
[2.69]
or
ø.106
[2.69]
ø.116
[2.95]
.41
[10.4]
(See Note 2)
(See Note 2)
.300
[7.62]
Side to Side Stackability
Max to Edge of PCB
for Daisy Chain
Dim G
Dim G
"Y"
C
L
C
L
“Y”
Position 1
.029
Position 1
[0.74]
.060
[1.52]
.100 .003
[2.54]
.100 .003
[2.54]
.100 .003
[2.54]
.232
[5.89]
.352
[8.94]
.100 .003
[2.54]
C
B
Recommended Mounting Hole Pattern
Recommended Mounting Hole Pattern
(Right Angle)
(Straight)
Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M
Part # 3341-6) with .106 [2.69] dia mounting hole may be used.
3.The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. See page 4 for kink position details (K2 version).
4. Contact your 3M sales representative for custom requirements.
X3XXX-XXXXXX
Plating
Ordering Information
RB = 30 μ”[ 0.76 μm ] Gold and 200 μ”[ 5.08 μm ] MatteTin
(App. E1 & C1 Apply)
Blank or UB = 30 μ” (0.76 μm ] Gold and 200 μ” [ 5.08 μm ]
N = HighTemp Black (PCT)/(RB Plating Req’d)
Blank = Std.Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)
Tin Lead (App. E3 & C2 Apply)
3M Part Number
(See Table 1)
Latch/Ejector System
Tail
0 = No Latch/Ejector installed
2 = Short Roll Pin Latch/Ejectors
3 = Long Roll Pin Latch/Ejectors
5 = Short, Snap-In Latch/Ejectors
6 = Long, Snap-In Latch/Ejectors
02 = for .062 [1.57] thick board
03 = for .094 to .125 [2.39 to 3.18] thick board
K2 = kinked for .062 [1.57] thick board
Pin Configuration
5 = Right Angle Solder Tails
6 = Straight SolderTails
TS-0772-M
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M™ Four-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Part Customization
Polarizing Post
This spec sheet details our standard offering.
3M has several capabilities that can provide a part tailored
to your specific needs. Ask your 3M sales representative
or customer service for more details.
.318
[8.08]
3201-4
3201-5
LCP
PBT
Black
Gray
.100 Dia
[2.54]
Note: Insert Post into one mounting hardware hole on bottom of header. Set
post to protrude .115” [2.92].
Both snap in and roll pin latches may be ordered sepa-
rately. Snap in and roll style latches are dimensionally and
functionally equivalent. If ordering snap-in or roll pin style
latches separately, please use the below chart.
2500 & 3000 Series Shrouded Header
Total Number
of Pins
Number of
Positions Kinked
Tails Kinked
Short
Latch
Long
Latch
Latch
Style
Color
Gray
10
14
16
20
24
26
30
34
36
40
50
60
64
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
4
4
7
8
Standard Temperature
(PBT)
3505-2
3505-3
Roll Pin
Roll Pin
Snap-In
11
13
17
21
23
25
27
27
33
43
49
53
12
14
18
22
24
26
28
28
34
44
50
54
3
4
High Temperature
(PCT)
N3505-2B
N3505-3B
Black
3
4
HighTemperature (PBT) 3505-30
3505-31
Gray
3
4
High Temperature (PPA) N3505-30B N3505-31B Snap-In
Black
3
4
5
6
• Selective pin removal (ATAor other compatability)
• Wire wrap tails styles
7
8
7
8
7
8
7
8
11
11
12
12
Kinked Tail Detail:
Kink is located .05” below bottom surface of plastic.
External radius of kink toward part centerline.
Mounting Hardware
Polarizing Keys
3341-6
(Must be inserted prior to latch on
3341-5
Dim A
.02
vertical headers)
(Installed from bottom of board)
N3518
3518
LCP
PBT
Black
Gray
.02
.50
[12.7]
.31
[7.9]
.09
[2.3]
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
Hex Head Bolt, Nut and Washer
Bolt - #2-56 X 1/2”
Breakaway Tab
.34 Ref
[8.6]
A
.15
[3.8]
3341-5 & 6
Material - Stainless Steel
Note: #2216 B/A Scotchweld can be used to adhere keys.
TS-0772-M
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
相关型号:
3432-66K2UG
HEADER CON,PCB MNT,RECEPT,40 CONTACTS,PIN,0.1 PITCH,PC TAIL W/RETNN TERMINAL,LATCH & EJECT,GRAY
3M
3432003UB
Board Connector, 80 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3432203UB
Board Connector, 80 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
3432302RB
Board Connector, 80 Contact(s), 4 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator
3M
©2020 ICPDF网 联系我们和版权申明