3408-10K2RB [3M]
Board Connector, 16 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT;型号: | 3408-10K2RB |
厂家: | 3M ELECTRONICS |
描述: | Board Connector, 16 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT |
文件: | 总8页 (文件大小:1275K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
•ꢀ Military (with 3M’s 3518 or N3518 polarizing key)
and center bump polarization
•ꢀ Low profile
•ꢀ Optional ejector latches
•ꢀ Mounting holes for securing header to board
•ꢀ Three wall shroud provides design flexibility
•ꢀ Solder tail and wrap tail options
•ꢀ Optional polarizing posts available
•ꢀ Optional high temperature insulator suitable for “no
lead” soldering operations
•ꢀ High temperature option is suitable for reflow
soldering using “paste in hole” techniques
•ꢀ See Regulatory InformationAppendix for chemical
compliance information
Date Modified: May 1, 2008
TS-0771-C
Sheet 1 of 5
Physical
Insulator:
Material: Glass Filled Polyester (PBT)
Glass Filled Polyester (PCT) - High Temp Option
Flammability: UL 94V-0
Color: Gray (PBT), Beige (PCT), Black (PCT)
Contact:
Material: CopperAlloy
Plating:
Underplating:
100 μ” [ 2.54 μm ] Nickel - Overall
WipingArea: 30 μ” [ 0.76 μm ] Gold
Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information)
3M Logo, Part Identification Number and Orientation Triangle
Marking:
Electrical
2A (EIA 364-70)
Current Rating:
Insulation Resistance:
Withstanding Voltage:
>1 × 109 Ω at 500VDC
1000VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
260°C (High Temp. PCT insulator) single pass (per J-STD-020C)
PBT gray insulator, maximum insulator temperature 191°C (solder
wave process only)
Process Rating:
1 (per J-STD-020C) High Temp. (PCT) versions only
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
-X2XX
-X0XX
Header without Latchs
-X3XX
Header with
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
Long Ejector/Latch
for 3M Sockets with
Strain Relief
.08
[2.0]
.08
[2.0]
.573 .010
[ 14.55 ]
.424 .010
[ 10.77 ]
1.07 Ref
[27.2]
.97 Ref
[24.6]
A
.46 Ref
[11.7]
.37 Ref
[9.4]
.025 .002 Sq Typ
[ 0.64 ]
.24
[6.1]
D
.020
0.51
.100
2.54
.28
7.1
REF.
.15
3.8
.30
[7.6]
.25
6.4
.31
7.9
.13
3.3
E
.010
C
L
.100
2.54
REF.
2X O .100 [2.54]
SEE NOTE #2
“Y”
POSITION #1
B
F Typ
Section A-A
Notch A
(See Table 1 & Note1)
(Straight)
Position 1
Orientation
Triangle
Notch B
(See Table 1)
Notch C
.16
.025 .002 Sq
Typ
[ 0.64 ]
.21
[5.3]
(See Table 1 & Note 1)
[4.1]
A
B
F Typ
.100 Ref
[2.54]
.24
[6.1]
.68
[17.3]
.12
[3.0]
.30
[7.6]
.35
[8.9]
C
L
“Y”
.020
[0.51]
E
.010
.197
[5.00]
.049
Ref
B
A
.20
[5.1]
C
A
2X Ø .100
[2.54]
(See Note 2)
Section B-B
(Right Angle)
TS-0771-C
Sheet 2 of 5
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Table 1
Dimensions
3M Part
Number
Polarizing
Notches
Pin Qty
A
B
C
D
10
14
16
20
26
34
40
50
60
64
3793
3314
3408
3428
3429
3431
3432
3433
3372
3764
1.26 (32.1)
1.46 (37.2)
1.56 (39.7)
1.76 (44.8)
2.06 (52.4)
2.46 (62.6)
2.76 (70.2)
3.26 (82.9)
3.76 (95.6)
3.96 (100.7)
1.105 (28.07)
1.305 (33.15)
1.405 (35.69)
1.605 (40.77)
1.905 (48.39)
2.305 (58.55)
2.605 (66.17)
3.105 (78.87)
3.605 (91.57)
3.805 (96.65)
0.865 (21.97)
1.065 (27.05)
1.165 (29.59)
1.365 (34.67)
1.665 (42.29)
2.065 (52.45)
2.365 (60.07)
2.865 (72.77)
3.365 (85.47)
3.565 (90.55)
0.71 (18.0)
0.91 (23.1)
1.01 (25.6)
1.21 (30.7)
1.51 (38.3)
1.91 (48.5)
2.21 (56.1)
2.71 (68.8)
3.21 (81.5)
3.41 (86.6)
BC
BC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Table 2
Pin Cross Section
Diagonals
3M Part
Number Suffix
Contact Tail
Dimension E
Dimension G
Dimension F
Corner Radii
Solder Tail for
.062 (1.57)
Thick PC Board
-1XX2
-2XX2
.112
(2.84)
.0245 ± .0005
(0.622)
.028 ± .001
(0.71)
.0075 Ref
(0.191)
0.035 ± .003
(0.89) (See Note 3)
Solder Tail for
0.94 (2.39) to .125
(3.18) Thick PC
Board
-1XO3
-2XO3
.155
(3.94)
.0245 ± .0005
(0.622)
.028 ± .001
(0.71)
.0075 Ref
(0.191)
0.035 ± .003 (0.89)
Ø.106 or
[2.69]
Ø.116
[2.95]
or
Ø.106
[2.69]
Ø.116
[2.95]
.41
(See Note 2)
[10.4]
(See Note 2)
Max to Edge of PCB
for Daisy Chain
.300
[7.62]
G Dim
Side to Side Stackability
G Dim
C
“Y”
L
“Y”
C
L
Position 1
.029
[0.74]
Position 1
.100 .003
[2.54]
.060
[1.52]
.100 .003
[2.54]
.100 .003
[2.54]
.232
[5.89]
.352
[8.94]
C
.100 .003
[2.54]
B
Recommended Mounting Hole Pattern
Recommended Mounting Hole Pattern
(Right Angle)
(Straight)
Inch
(mm)
Tolerance Unless Noted
.00
.000
.0
Inch
± .005
± .01
± .1
Notes:
[ ] Dimensions for
Reference only
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518).
2. Accepts Rear and Front mounting hardware:
Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole
Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6,
.106 [2.69] dia mounting hole
3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ± .002.
Kink is located .05” below bottom surface of plastic. External radius of kink toward part centerline
TS-0771-C
Sheet 3 of 5
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Ordering Information
X3XXX - XXXX XX
Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)
N = High Temp Beige (PCT) /(Blank or UB Pltg. Req’d.)
N = High Temp Black (PCT)/(RB Plating Req’d)
blank or UB = 30 μ” Gold with Sn/Pb Tails (App. E3 & C2 Apply)
RB = 30 μ” Gold with Matte Tin Tails (App. E1 & C1 Apply)
3M Part Number
(See Table 1)
Tail
02 = Solder Tail for .062 [1.57] Thick Board
K2= Kinked Solder Tails for .062 [1.57] Thick Board
03 = Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board
Shroud and Pin Configuration
1 = 3 Wall, Right Angle Solder Tail
2 = 3 Wall, Straight Solder Tail
Latch/Ejector System
0 = No Latch/Ejector
2 = Short Roll PinLatch/Ejectors
3 = Long Roll Pin Latch/Ejectors
Part Customization
This spec sheet details our standard offering.
3M has several capabilities that can provide a part tailored to
your specific needs. Ask your 3M sales representative or
customer service for more details.
Kinked Tail (K2 option) positions:
2500 & 3000 Series Shrouded Header
Total Number Number of
Positions
Kinked
Use of snap-in style latch/ejectors in either short (N3XXX
X5XX) or long (N3XXX-X6XX) styles, installed or shipped
separately (the -5 & -6 snap-in latches are dimensional and
functional equivalents to the -2 & -3 roll pin latches) which
are also available separately with roll pins included. Refer to
chart below.
of Pins
Tails Kinked
10
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
5
7
7
7
7
4
4
4
4
4
4
6
8
8
8
8
7
8
14
11 12
13 14
17 18
21 22
23 24
25 26
27 28
27 28
33 34
43 44
16
20
24
If ordering snap-in or roll pin style latches separately, please use the below chart
26
30
Short Latch Long Latch Latch Style Color
Standard Temperature
(PBT)
3505-2
3505-3
Roll Pin
Roll Pin
Roll Pin
Snap-In
Snap-In
Gray
34
36
High Temperature
(PCT)
N3505-2
N3505-2B
3505-30
N3505-30
N3505-3
N3505-3B
3505-31
N3505-31
Beige
Black
Gray
40
High Temperature
(PCT)
50
60
11 12 49 50
11 12 53 54
High Temperature
(PPA)
64
High Temperature
(PPA)
Beige
Black
Kinked Tail Detail:
High Temperature
(PPA)
N3505-30B N3505-31B Snap-In
Kink is located .05” below bottom surface of plastic.
External radius of kink toward part centerline.
•ꢀ Selective pin removal (ATA or other compatability)
•ꢀ Wire wrap tails styles
TS-0771-C
Sheet 4 of 5
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Three-Wall Header
.100” × .100” Latch/Ejector, Straight and RightAngle
3000 Series
Polarizing Post
3201-3
3201-4
P B T
LC P
G ray
B lac k
.321
[8.15]
.100 Dia
[2.54]
Note: Insert Post into one mounting hardware hole on
bottom of header. Set post to protrude .115” [2.92]
Polarizing Keys
Dim A
.02
.02
N3518
3518
LCP
PBT
Black
Gray
.09
[2.3]
Breakaway Tab
.34 Ref
[8.6]
A
.15
[3.8]
Note: #2216 B/A Scotchweld can be used to adhere keys.
Mounting Hardware
3341-6
(Must be inserted prior to latch on
vertical headers)
3341-5
(Installed from bottom of board)
.50
[12.7]
.31
[7.9]
Hex Head Bolt, Nut and Wash
Bolt - #2-56 X 1/2”
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
3341-5 & 6
Material - Stainless Steel
TS-0771-C
Sheet 5 of 5
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-D
3M is a trademark of 3M Company.
相关型号:
3408-1203UB
Board Connector, 16 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator,
3M
3408-1603UG
Board Connector, 16 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Gray Insulator, Receptacle
3M
3408-2002UB
Board Connector, 16 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator,
3M
3408-2003UB
Board Connector, 16 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator,
3M
©2020 ICPDF网 联系我们和版权申明