2380-5121TG [3M]
80 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER;
| 型号： | 2380-5121TG |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 80 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER PC 连接器 |
| 文件： | 总5页 (文件大小：1569K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Pin Strip Header
.100″ and .100″ × .100″ Straight and Right Angle, Solder Tail
2300 Series
• One and two row versions
• Straight and right angle versions
• Tin lead or gold plating available
• Tapered tip does not cut the socket wipe during
insertion, reducing operational failure and repairs
• Board retention feature available
• Two-row right angle mates with Pak 100
wiremount sockets anywhere on the board
• See Regulatory Information Appendix (RIA)
for chemical compliance information
TS-0766-12
Date Modified: February 22, 2007
Sheet 1 of 3
Physical
Insulation
Material:
Glass Filled Thermoplastic
Flammability:
Color:
UL 94V-0
Black
Contact
Material:
Copper Alloy
Plating
Underplating:
Wiping Area:
Solder Tails:
Marking:
50 μ″ [ 1.27 μm ] Nickel
Tin or Gold (See Ordering Information)
100 μ″ [ 2.54 μm ] 90/10 Tin Lead
None
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
3 A
9
> 5 × 10 Ω at 500 V
DC
1000 V
at Sea Level
RMS
Environmental
Operating Temperature Rating:
55°C to +105°C
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
.100″ and .100″ × .100″ Straight and Right Angle, Solder Tail
2300 Series
Straight
C ± .015
(See Note 1)
.100
[2.54]
.050
[1.27]
.100
[2.54]
.100
[2.54]
.050
[1.27]
.050
[1.27]
.025 Sq
[0.64]
A ± .010
A ± .010
.100
[2.54]
.120
.120
[3.05]
[3.05]
.200
[5.08]
D ± .015
(See Note 1)
∅ .040 ± .003
[1.02]
(See Note 2)
∅ .040 ± .003
[1.02]
(See Note 2)
.100 ± .003 Typ
[2.54]
.100 ± .003 Typ
.100 ± .003 Typ
[2.54]
[2.54]
Recommended Mounting Hole Pattern
Inch
[mm]
Tolerance Unless Noted
Notes:
.000
± .005
.0
.00
1.“C” = .100″ X pin quantity per row.
± .01
Inch
± .1
2.The recommended PCB hole size for the kinked tail positions on the .120″ solder tail connector is ∅ .040″ ± .002.
The kinked tail positions are the first and last position in each row.
[ ] Dimensions for
Reference only
Ordering Information
23XX-6XXX XX
Plating
TB = 30μ ″Gold (App. E3 & C2 Apply)
TG = 10μ″Gold (App. E3 & C2 Apply)
TP = Tin-lead (App. E3 & C2 Apply)
Pin Quantity
One Row (02-40)
Two Row (04-80)
Tail
One Row
Pin Length
(Dim A)
1 = .230″
2 = .318″
Two Row
TS-0766-12
Sheet 2 of 3
11 = .120″ Solder Tails
21 = .120″ Solder Tails
51 = .120″ Kinked Solder Tails 81 = .120″ Kinked Solder Tails
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
.100″ and .100″ × .100″ Straight and Right Angle, Solder Tail
2300 Series
Right Angle
C ± .015
.100
(See Note 1)
[2.54]
.120
[3.05]
.100
[2.54]
.050
[1.27]
.100
.050
.071
[1.80]
[2.54]
[1.27]
.025 Sq
[0.64]
A ± .010
A ± .010
.08
[1.5]
.100
[2.54]
.06
[1.5]
.242
[6.14]
D ± .015
(See Note 1)
∅ .040 ± .003
[1.02]
(See Note 2)
∅ .040 ± .003
[1.02]
(See Note 2)
.100 ± .003 Typ
[2.54]
.100 ± .003 Typ
[2.54]
.100 ± .003 Typ
[2.54]
Inch
[mm]
Recommended Mounting Hole Pattern
Tolerance Unless Noted
.000
± .005
.0
.00
± .01
Inch
± .1
Notes:
1. “C” = .100″ X pin quantity per row.
[ ] Dimensions for
Reference only
2. The recommended PCB hole size for the kinked tail positions on the .120″ solder tail connector is Ø .040″ ± .002.
The kinked tail positions are the first and last position in each row.
3. Drawing not to scale. Part details may vary.
Ordering Information
23XX-5XXX XX
Plating
TB = 30μ″ Gold (App. E3 & C2 Apply)
TG = 10μ″ Gold (App. E3 & C2 Apply)
TP = Tin-lead (App. E3 & C2 Apply)
Pin Quantity
One Row (02-40)
Two Row (04-80)
Tail
One Row
11 = .120″ Solder Tails
Pin Length
(Dim A)
1 = .230″
2 = .318″
Two Row
TS-0766-12
Sheet 3 of 3
21 = .110″ Solder Tails
51 = .120″ Kinked Solder Tails 81 =.110″ Kinked Solder Tails
3M is a trademark of 3M Company.
For technical, sales or ordering information call
3M
Interconnect Solutions
http://www.3M.com/interconnects/
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-B
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
20
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Name and Content of Hazardous Substances or Elements
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects
RIA-2217-B
© 3M 2007
相关型号：
2380-5121TN
Board Connector, 80 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle
3M
2380-5181TN
HEADER CONNECTOR,PCB MNT,RECEPT,80 CONTACTS,PIN,0.1 PITCH,PC TAIL W/RETNN TERMINAL,BLACK
3M
2380-5221TN
Board Connector, 80 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle
3M
©2020 ICPDF网 联系我们和版权申明