155216-5303-RB [3M]
Latch/Eject Header - 2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount; 锁定/释放头 - 2毫米×2mm的直线和直角，通孔，直，表面贴装
| 型号： | 155216-5303-RB |
| 厂家： | 
3M ELECTRONICS |
| 描述： | Latch/Eject Header - 2 mm x 2 mm Straight & Right Angle, Through-Hole, Straight, Surface Mount |
| 文件： | 总7页 (文件大小：1130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ Latch/Eject Header
2 mm x 2 mm Straight & RightAngle, Through-Hole, Straight, Surface Mount
1552 Series
•ꢀ 14 pin counts ranging from 6 to 50 positions
•ꢀ Latch/eject mechanism maintains a secure
connection
•ꢀ Roll pins retain latches to body in shipping and high
vibration environments
•ꢀ Ejector helps make removal of assemblies easy
•ꢀ Latch design helps resist breakage during eject
•ꢀ High temperature insulators suitable for “lead free”
processing and meet JEDEC J-STD-020C
•ꢀ Robust system solution when used with 3M™ IDC
Wiremount Sockets or 3M™ Molded Cable
Assemblies
•ꢀ SMT latch/eject headers are available in tape and reel
with vacuum cap for automatic placement. Latch
option 2 and 3.
•ꢀ See Regulatory InformationAppendix (RIA) for
chemical compliance information
Date Modified: September 16, 2008
TS-2199-F
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Black
Contact:
Material: CopperAlloy
Plating:
Underplating: 50 μ" [ 1.27 μm ] Nickel
WipingArea: See Ordering Information
Solder Tails: 200 μ" [ 5.0 μm ] Matte Tin
Electrical
1A
Current Rating:
Insulation Resistance:
Withstanding Voltage:
> 1 × 109 Ω at 500VDC
1,000VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
Maximum 260°C (per J-STD-020C)
1 (per J-STD-020C)
Process Rating:
Moisture Sensitivity Level:
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Latch/Eject Header
2 mm x 2 mm Straight & RightAngle, Through-Hole, Straight, Surface Mount
1552 Series
Straight
.22
5.5
.29
7.4
.59
15.1
REF.
.59
15.1
REF.
.18
4.6
REF.
.18
4.6
REF.
1552XX-X2XX
Latch mating to
molded-on socket with
latching ear
1552XX-X3XX
Latch mating to
press-on socket
See Chart 1 for latch availability.
See Chart 1 for latch availability.
.44
11.2
DIM. "A"
DIM. "D"
.76
19.3
REF.
.247
6.27
.163
4.14
.28
7.11
REF.
.079
2.00
1552XX-X4XX
Latch mating to
SCI Carrier
See Chart 1 for latch availability.
.079
2.00
POSITION #1
ORIENTATION
TRIANGLE
.26
6.7
.15
3.8
.425
10.80
Inch
[Imm]
.020
0.51
SQ.
Tolerance Unless Noted
.0
.00
.000
DIM. "E" ±.01
[DIM. "E"] ±0.25
DIM. "B"
Inch
±.1
±.01 ±.005
[ ] Dimensions for Reference Only
PC Board Footprint
.079 ±.003
2.00 ±0.08
.079 ±.003
2.00 ±0.08
.032 ±.003
0.81 ±0.08
AFTER PLATING
O
DIM. "B"
.787
20.00
Note: SeeChart 1 (sheet 4) for dimensions A, B, D
Ordering Information
1552XX-6X0X-XX
Contact Quantity
(See Table)
Plating Options:
RB = 30 μ" [ 0.76 μm ] Gold
RA = 10 μ" [ 0.25 μm ] Gold
(RIA E1 & C1 apply) (both platings)
Solder Tail Length:
Dimension "E"
Latching:
2 = .112" [ 2.84 ]
3 = .155" [ 3.94 ]
2 = Latch, molded on skt with latching ear
3 = Latch, press on skt
4 = Latch, 2 mm SCI Carrier Only
Note: See Chart 1 (sheet 4) for latching availability
TS-2199-F
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Latch/Eject Header
2 mm x 2 mm Straight & RightAngle, Through-Hole, Straight, Surface Mount
1552 Series
Right Angle
Inch
[Imm]
DIM. "A"
Tolerance Unless Noted
.0
.00
.000
Inch
±.1
±.01 ±.005
.247
6.27
.163
4.14
[ ] Dimensions for Reference Only
.079
2.00
.079
2.00
DIM. "D"
POSITION #1
ORIENTATION
TRIANGLE
.26
6.7
.15
3.8
.59
15.1
.51
2X
12.9
.425
10.80
.079
2.00
DIM. "E" ±.01
[DIM. "E"] ±0.25
DIM. "B"
PC Board Footprint
.33
8.5
EDGE OF PCB
.032 ±.003
0.81 ±0.08
AFTER PLATING
O
.079 ±.003
2.00 ±0.08
.079 ±.003
2.00 ±0.08
.787
20.00
DIM. "B"
Notes:
1. See straight drawings (sheet 2) for latch dimensions.
2. See Chart 1 (sheet 4) for dimensions A, B, and D.
Ordering Information
1552XX-5X0X-XX
Contact Quantity
(See Table)
Plating Options:
RB = 30 μ" [ 0.76 μm ] Gold
RA = 10 μ" [ 0.25 μm ] Gold
(RIA E1 & C1 apply) (both platings)
Solder Tail Length:
Dimension "E"
Latching:
2 = .112" [ 2.84 ]
3 = .155" [ 3.94 ]
2 = Latch, molded on skt with latching ear
3 = Latch, press on skt
Note: See Chart 1 (sheet 4) for latching availability
TS-2199-F
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ Latch/Eject Header
2 mm x 2 mm Straight & RightAngle, Through-Hole, Straight, Surface Mount
1552 Series
Surface Mount Vertical
DIM. "A"
DIM. "D"
.247
6.27
.163
4.14
Inch
[Imm]
.079
2.00
Tolerance Unless Noted
.0
.00
.000
.079
2.00
Inch
±.1
±.01 ±.005
[ ] Dimensions for Reference Only
POSITION #1
ORIENTATION
TRIANGLE
.26
6.7
.15
3.8
.425
10.80
.320 ±.010
8.13 ±0.25
.020
0.51
SQ.
DIM. "B"
Chart 1
PC Board Footprint
Contact
Quantity
Latch
Tape
Order
Dim. "A"
Dim "B"
Dim "D"
Availability Width Code
0.079±0.003
[2.01±0.08]
0.030
[0.76]
6
.673 [17.09]
.752 [19.10]
.831 [21.10]
.910 [23.10]
.157 [4.00]
.236 [6.00]
.315 [8.00]
.394 [10.00]
.333 [8.45]
.411 [10.44]
.490 [12.45]
.569 [14.45]
.726 [18.44]
.884 [22.45]
.963 [24.46]
1.041 [26.44]
1.120 [28.45]
2,4
2,4
44 mm
44 mm
44 mm
44 mm
56 mm
56 mm
56 mm
56 mm
72 mm
72 mm
72 mm
72 mm
88 mm
88 mm
WD
WD
WD
WD
WE
WE
WE
WE
WF
WF
WF
WF
WG
WG
8
10
12
16
20
22
24
26
30
34
40
44
50
2,3,4
3,4
1.067 [27.10] .551 [14.00]
1.224 [31.09] .709 [18.00]
1.303 [33.10] .787 [20.00]
1.382 [35.10] .866 [22.00]
1.461 [37.10] .945 [24.00]
2,4
0.366
[9.30]
0.394
[10.01]
2,3,4
2,4
2,4
0.150
[3.81]
2,3,4
2,4
DIM "B"
1.618 [41.10] 1.102 [28.00] 1.278 [32.46]
1.774 [45.09] 1.260 [32.00] 1.435 [36.46]
2.012 [51.10] 1.496 [38.00] 1.671 [42.44]
2.169 [55.09] 1.654 [42.00] 1.829 [46.46]
2.405 [61.09] 1.890 [48.00] 2.065 [54.45]
2,4
Note:
2,3,4
2,3,4
2,3,4
1. See straight drawings (pg 2) for latch dimensions.
2. Tape & reel parts always supplied with pick ‘n place
surface
3. Tray parts supplied without pick ‘n place
Notes: 1. See straight drawings (sheet 2) for latch dimensions.
2. See Chart 1 for applicability.
3. Tape and Reel parts include tape vacuum pick-up cap
4. Tape and reel not available with SCI latch.
Ordering Information
1552XX-2X00-XX-XX
Contact Quantity
(See Table)
Packaging:
WX = Tape & reel (see table)
Blank = Trays
Plating Options:
RB = 30 μ" [ 0.76 μm ] Gold
RA = 10 μ" [ 0.25 μm ] Gold
(RIA E1 & C1 apply) (both platings)
Latching:
2 = Latch, molded on skt with latching ear
3 = Latch, press on skt
TS-2199-F
Sheet 4 of 4
4 = Latch, 2 mm SCI carrier only
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-E
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part does not contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain
Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-E
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-E
3M is a trademark of 3M Company.
相关型号：
155216-6202-RB
16 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M
155216-6303-RB
16 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明