14T36-SZ6B-200-0HC [3M]

3M Mini D Ribbon (MDR) Cable Assembly; 3M微型D丝带（ MDR ）电缆组件


型号：	14T36-SZ6B-200-0HC
厂家：	3M ELECTRONICS
描述：	3M Mini D Ribbon (MDR) Cable Assembly 3M微型D丝带（ MDR ）电缆组件互连器件连接器
文件：	总7页 (文件大小：347K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position

14X36-SZ6B-XXX-0HC

• Supports LVDS Channel Link™ signaling

• 10 shielded pairs (100 ohm) +2 drains for

high bandwidth applications

• 1 USB pair & 4 singles

• High density 36 position MDR with rugged

ribbon type contact

• Metal junction shell with Quick Release

Latches

• EMI over-molded junction shell with rugged

thumbscrew retention

• See Regulatory Information Appendix (RIA)

for chemical compliance information

TS-2102-B

Date Modified: October 9, 2007

Sheet 1 of 4

Physical

Connector Contact Plating

Wiping Area:

30 μ″ [ 0.76 μm ] Min. Gold

Thumbscrew Shell Color:

Beige

Thumbscrew Shell Material:

Metal shell plating:

Metal shell material:

Cable

Acrylonitrile Butadiene Styrene (ABS)

Nickel

Aluminum, .050" [1.27 mm] Thick

Color:

Beige

Jacket Material:

Flammability:

Polyvinyl Chloride (PVC)

AWM VW-1

Electrical

Voltage Rating:

Current Rating:

30 V

1 A

Insulation Resistance:

> 1 × 10 Ω at @100 V

350 V

for 1 minute

Withstanding Voltage:

Individually Shielded Twisted Pairs

Characteristic Impedance:

Conductor Size:

RMS

100 ± 10

28 AWG Stranded

Propogation Velocity:

1.25 ns/ft [4.1 ns/m ]

Environmental

Temperature Rating:

-20°C to +75°C

Channel Link is a trademark of National Semiconductor.

UL File No.: E86982

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position

14X36-SZ6B-XXX-0HC

Metal Latching Shell

36 Position High Density

Mini D Ribbon (MDR)

Male Plug

36 Position High Density

Mini D Ribbon (MDR)

Male Plug

Cable

(Shielded Twisted Pairs)

2X Squeeze

Release Latches

2X Squeeze

Release Latches

32.0

1.3

32.0

1.3

LENGTH

39.8

1.6

12.7

0.5

MDR 36 Position Plug

Both Ends

[Inch]

Assembly Length Tolerance

Tolerance Unless Noted

0.00

0.0

Cable Length:

0.5 to 1.5 meters -0 + .05 meters

2 to 10 meters -0 +3% of length

Generic End Detail

MDR 36 Position Plug

± .10

± .1

( Both Ends )

[ ] Dimensions for

Reference only

Ordering Information

(RIA E1 & C1 apply)

14X36-SZ6B-XXX-0HC

Backshell Options:

T = Over-molded 4-40 thumbscrew

1 = Metal Latching Shell

Length:

100 = 1.0 meters

200 = 2.0 meters

500 = 5.0 meters

TS-2102-B

Sheet 2 of 4

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position

14X36-SZ6B-XXX-0HC

Over-Molded #4-40 Thumbscrew

36 Position

High Density

Mini D Ribbon

(MDR) Male Plug

Mini D Ribbon

(MDR) Male Plug

Cable

(See pinout for

cable construction)

2X Thumbscrew

#4-40 thread

2X Thumbscrew

#4-40 thread

45.7

1.8

45.7

1.8

LENGTH

(See ordering information)

45.7

1.8

10 12 14 16

13 15 17

14.5

0.6

21 23 25

29 31 33 35

22 24 26

30 32 34 36

37.6

1.5

Generic End Detail

[Inch]

MDR 36 Position Plug

( Both Ends )

Tolerance Unless Noted

0.00

0.0

Assembly Length Tolerance

± .10

± .1

Cable Length:

0.5 to 1.5 meters -0 + .05 meters

2 to 10 meters -0 +3% of length

[ ] Dimensions for

Reference only

TS-2102-B

Sheet 3 of 4

Note: 1. Use 3341-31 jacksocket for mounting receptacle to panel.

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Interconnect Solutions

http://www.3M.com/interconnects/

3M™ Mini D Ribbon (MDR) Cable Assembly

.050″ High Speed Video Data Transmission System, 36 Position

14X36-SZ6B-XXX-0HC

MDR 36 Position Pinout (F36-02)

Pair

Signal

A0-

Position

Signal

Pair

Signal

A0-

Position

Signal

Pair

USB Pwr W6

Shld Gnd Drain

USB Pwr W6

Shld Gnd Drain

A0+

A1-

A4-

A4+

A1-

A4-

A4+

A1+

A2-

A5-

A2-

A5-

A2+

A5+

A2+

A5+

CLK1-

CLK1+

A3-

A6-

CLK1-

CLK1+

A3-

A6-

A6+

A7-

A3+

A7+

A3+

A7+

Drain Shld Gnd

CLK2-

CLK2+

Drain Shld Gnd

CLK2-

CLK2+

N/C

W1 DDC Gnd

DDC/SCL

DDC/SDA

DDC/SCL

DDC/SDA

W4 DDC Pwr

W5 USB Gnd

W4 DDC Pwr

W5 USB Gnd

SP1

USB+

USB-

SP1

SP2

USB+

USB-

Notes:

All pairs are individually shielded with aluminum foil.

Pair shields are wrapped Aluminum out and in contact with six internal drains (logic ground).

Outer braid and foil (chassis ground) is isolated from inner drains (logic ground).

TS-2102-B

Sheet 4 of 4

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-c

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217B-c

Appendix C3: China RoHS