10120-72B2PC [3M]

3M Mini D Ribbon (MDR) Connectors; 3M微型D丝带（ MDR ）连接器


型号：	10120-72B2PC
厂家：	3M ELECTRONICS
描述：	3M Mini D Ribbon (MDR) Connectors 3M微型D丝带（ MDR ）连接器连接器
文件：	总7页 (文件大小：546K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Through-Hole Right Angle Plug - Shielded

101 Series

• Wiper-on-wiper contact for reliable

repetitive plugging

• Rugged die cast metal case construction

• Screw or ground lock PCB retention

• Normal and reverse “D” interface options for

board to board flexibility

• IEEE 1284C Interface as a 36 contact connector

• Contacts: 20, 26, 36 and 50

• See Regulatory Information Appendix (RIA)

for chemical compliance information

TS-0620-B

Date Modified: November 26, 2007

Sheet 1 of 4

Physical

Insulation Material:

Flammability:

Color:

Glass Reinforced Polyester Body

UL 94V-0

Black

Contact Material:

Plating

Copper Alloy

Underplating:

Wiping Area:

Solder Tail Plating:

Body Material:

Plating

80 μ″ [ 2.0 μm ] Min. Nickel

30 μ″ [ 0.76 μm ] Min. Gold

Gold flash over Nickel (RIA E1 & C1 apply)

Zinc Alloy

Nickel

Ground Lock

Material:

Copper Alloy

Plating:

Tin in combination with Gold flash plated tail

3M Logo and Part Number

Marking:

Electrical

Current Rating:

Insulation Resistance:

Withstanding Voltage:

1 A

> 5 × 10 Ω at 500 V_DC

500 V_RMSfor 1 Minute

Environmental

Temperature Rating:

-20°C to +85°C

Process Rating:

Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat,

60 sec. max. duration

UL File No.: E68080

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Through-Hole Right Angle Plug - Shielded

101 Series

Dimensions

Contact

Quantity

.450 [11.43]

.600 [15.24]

.850 [21.59]

1.200 [30.48]

.71 [18.1]

.87 [22.0]

1.11 [28.3]

1.46 [37.2]

1.081 [27.45]

1.231 [31.26]

1.481 [37.61]

1.831 [46.5]

1.31 [33.3]

1.46 [37.2]

1.71 [43.5]

2.06 [52.4]

.12

[3.0]

2X PCB Lockdown Thread

(see ordering information)

.15

[3.8]

.34

[8.6]

3X .075

[1.91]

.65

[16.5]

.188

[4.79]

.18

[4.8]

.31

[7.9]

.01

[0.3]

Position 1

.33

[8.4]

.26

[6.6]

.38

[9.7]

.36

[9.1]

2X Panel Thread

(see ordering

information)

.19

[4.8]

.02

[0.5]

.15

[3.8]

15°

.01

Position

[0.2]

.050

[1.27]

Last

Position

Optional Ground Lock

(see ordering

information)

Normal Type

(see ordering information)

Inch

[m m ]

Tolerance U nless N oted

.00

.000

Reverse Type

(see ordering information)

inch ±.1

±.01 ±.005

[ ] D im ensions for R eference

O nly

Ordering Information

101XX-X2X2PC

Panel/Board Retention Feature

20, 26, 36 pos:

Contact Quantity

1 = M2.5 panel/M2.5 screw lock

B = M2.5 panel/ground lock

50 pos:

4 = 4-40 panel/4-40 screw lock

E = 4-40 panel/ground lock

Mounting Feature

5 = Boardmount Right Angle Normal Type

7 = Boardmount Right Angle Reverse Type

TS-0620-B

Sheet 2 of 4

Use (M2.5 x 8 mm) screws to mount to panel with max. thickness of .079 [2.0].

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Through-Hole Right Angle Plug - Shielded

101 Series

Recommended Board Layout (Normal Type Plug)

(Plug viewed from connector side; receptacle viewed from bottom side)

Dimensions

Contact

Quantity

.450 [11.43]

1.081 [27.45]

.93 [23.7]

Boardmount Plug

(Right Angle Normal type)

101XX-52X2

.600 [15.24]

1.231 [31.26]

1.08 [27.5]

Receptacle

(Right Angle type)

102XX-5XXX

.850 [21.59]

1.481 [37.61]

1.831 [46.50]

1.33 [33.9]

1.200 [30.48]

1.685 [42.80]

.57

[14.5]

For 26 or 50 Position Plug Only

For 20 or 36 Position Plug Only

2X Mounting Holes

(See Note 1)

2X Mounting Holes

(See Note 1)

.35

[9.0]

2X .16

2X 0.16

[4.0]

3X .075

[1.91]

[4.0]

3X .075

[1.91]

2X .20

[5.0]

2X .20

[5.0]

Position 2

Position 3

Position 2

B ± .004

.050

[1.27]

Position 3

B ± .004

.050

[1.27]

Position 1

Position

∅ .028 ± .003 Typ

[0.71]

Position 1

Position

Position 2

Position 3

Position 2

Position 3

.04

[1.1]

.04

[1.1]

Connecting with

Position 1

Connecting with

Position 1

Connecting with

Row

.19 Max

[4.8]

Connecting with

Position

.19 Max

[4.8]

R .060

[1.52]

.340 ± .004

[ 8.64 ]

C ± .004

B ± .004

Notes:

1. Plated-through PC board mounting Holes for 0.062

[1.57] board thickness:

Grounding Flange (Screw Lock) - ∅ .110 ± .003 [2.79]

(20, 26, 36 pos)

Ground Lock - ∅ .100 ± .003 [2.54]

Grounding Flange (Screw Lock) - ∅ .120 ± .003 [3.05]

(50 pos)

Recommended Panel Cut-Out

(See Notes)

TS-0620-B

Sheet 3 of 4

2. Panel thickness .079 [2.00] Max.

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Mini D Ribbon (MDR) Connectors

.050″ Boardmount Through-Hole Right Angle Plug - Shielded

101 Series

Dimensions

Contact

Quantity

Recommended Board Layout (Reverse Plug)

.450 [11.43]

1.081 [27.45]

.93 [23.7]

(Plug viewed from Connector side Receptacle viewed from bottom side)

.600 [15.24]

1.231 [31.26]

1.08 [27.5]

Receptacle

(Right Angle type)

102XX-5XXX

Boardmount Plug

(Right Angle Reverse type)

.850 [21.59]

1.481 [37.61]

1.831 [46.50]

1.33 [33.9]

101XX-72X2

1.200 [30.48]

1.685 [42.80]

.57

[14.5]

For 20 or 36 Position Plug Only

For 26 or 50 Position Plug Only

Connecting with

Position 1

.35

[9.0]

Position 3

Position 2

.35

[9.0]

Connecting with

Position 1

Position 2

Position 3

Connecting with

Row

Connecting with

Row

Position 1

Position 2

Position 3

Position 1

.050

[1.27]

Position 2

Position 3

.050

[1.27]

B ± .004

2X .20

[5.0]

2X .20

[5.0]

B ± .004

∅ .028 ± .003

[0.71]

∅ .028 ± .003

[0.71]

2X .16

[4.0]

2X .16

[4.0]

.04

[1.1]

.04

[1.1]

2X Mounting Holes

(See Note 1)

.19 Max

[4.8]

2X Mounting Holes

(See Note 1)

.19 Max

[4.8]

3X .075

[1.91]

3X .075

[1.91]

Notes:

1. Plated-through PC board mounting Holes for 0.062

[1.57] board thickness:

Grounding Flange (Screw Lock) - ∅ .110 ± 0.003

[2.8] (20, 26, 36 pos)

Ground Lock - ∅ .100 ± 0.003 [2.6]

Grounding Flange (Screw Lock) - ∅ .120 ± 0.003

[3.0] (50 pos)

R .060

[1.52]

.340 ± .004

[8.64]

C ± .004

B ± .004

Recommended Panel Cut-Out

TS-0620-B

Sheet 4 of 4

2. Panel thickness .079 [2.00] Max.

(See Notes)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-c

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217B-c

Appendix C3: China RoHS